refactor(drivers/rpm_capture): convert params.c to module.yaml

Convert 1 parameter file(s) from legacy C format to YAML
module configuration.
This commit is contained in:
Jacob Dahl
2026-03-17 21:55:32 -08:00
committed by Jacob Dahl
parent 8ab135f15a
commit 4fd1246d76
3 changed files with 23 additions and 55 deletions
+2
View File
@@ -44,4 +44,6 @@ px4_add_module(
-DPARAM_PREFIX="${PARAM_PREFIX}"
SRCS
RPMCapture.cpp
MODULE_CONFIG
rpm_capture_params.yaml
)
@@ -1,55 +0,0 @@
/****************************************************************************
*
* Copyright (c) 2024 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* RPM capture enable
*
* Enables the RPM capture module to estimate RPM from pulses detected on a PWM pin configured as "RPM Input".
*
* @boolean
* @group System
* @reboot_required true
*/
PARAM_DEFINE_INT32(RPM_CAP_ENABLE, 0);
/**
* Voltage pulses per revolution
*
* Number of voltage pulses per one rotor revolution on the capturing pin.
*
* @group System
* @min 1
* @max 50
* @reboot_required true
*/
PARAM_DEFINE_INT32(RPM_PULS_PER_REV, 1);
@@ -0,0 +1,21 @@
module_name: rpm_capture
parameters:
- group: System
definitions:
RPM_CAP_ENABLE:
description:
short: RPM capture enable
long: Enables the RPM capture module to estimate RPM from pulses detected
on a PWM pin configured as "RPM Input".
type: boolean
default: 0
reboot_required: true
RPM_PULS_PER_REV:
description:
short: Voltage pulses per revolution
long: Number of voltage pulses per one rotor revolution on the capturing pin.
type: int32
default: 1
min: 1
max: 50
reboot_required: true