diff --git a/.vscode/cmake-variants.yaml b/.vscode/cmake-variants.yaml
index 461ce2d95b..f41c0af8cb 100644
--- a/.vscode/cmake-variants.yaml
+++ b/.vscode/cmake-variants.yaml
@@ -336,6 +336,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x25-evo_default
+    cuav_x25-super_default:
+      short: cuav_x25-super
+      buildType: MinSizeRel
+      settings:
+        CONFIG: cuav_x25-super_default
     cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
diff --git a/Makefile b/Makefile
index 3cbe67acc9..55d910d7c5 100644
--- a/Makefile
+++ b/Makefile
@@ -332,6 +332,7 @@ bootloaders_update: \
 	cuav_7-nano_bootloader \
 	cuav_fmu-v6x_bootloader \
 	cuav_x25-evo_bootloader \
+	cuav_x25-super_bootloader \
 	cubepilot_cubeorange_bootloader \
 	cubepilot_cubeorangeplus_bootloader \
 	hkust_nxt-dual_bootloader \
diff --git a/boards/cuav/x25-super/CMakeLists.txt b/boards/cuav/x25-super/CMakeLists.txt
new file mode 100644
index 0000000000..133046a2b7
--- /dev/null
+++ b/boards/cuav/x25-super/CMakeLists.txt
@@ -0,0 +1,35 @@
+############################################################################
+#
+#   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+add_subdirectory(core_heater)
+add_subdirectory(pwm_voltage)
diff --git a/boards/cuav/x25-super/bootloader.px4board b/boards/cuav/x25-super/bootloader.px4board
new file mode 100644
index 0000000000..19b6e662be
--- /dev/null
+++ b/boards/cuav/x25-super/bootloader.px4board
@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""
diff --git a/boards/cuav/x25-super/cmake/upload.cmake b/boards/cuav/x25-super/cmake/upload.cmake
new file mode 100644
index 0000000000..71d0a62541
--- /dev/null
+++ b/boards/cuav/x25-super/cmake/upload.cmake
@@ -0,0 +1,49 @@
+############################################################################
+#
+#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+
+set(PX4_FW_NAME ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.px4)
+
+add_custom_target(upload_skynode_usb
+	COMMAND ${PX4_SOURCE_DIR}/Tools/auterion/upload_skynode.sh --file=${PX4_FW_NAME}
+	DEPENDS ${PX4_FW_NAME}
+	COMMENT "Uploading PX4"
+	USES_TERMINAL
+)
+
+add_custom_target(upload_skynode_wifi
+	COMMAND ${PX4_SOURCE_DIR}/Tools/auterion/upload_skynode.sh --file=${PX4_FW_NAME} --wifi
+	DEPENDS ${PX4_FW_NAME}
+	COMMENT "Uploading PX4"
+	USES_TERMINAL
+)
diff --git a/boards/cuav/x25-super/core_heater/CMakeLists.txt b/boards/cuav/x25-super/core_heater/CMakeLists.txt
new file mode 100644
index 0000000000..35c06ea37c
--- /dev/null
+++ b/boards/cuav/x25-super/core_heater/CMakeLists.txt
@@ -0,0 +1,39 @@
+############################################################################
+#
+#   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+px4_add_module(
+	MODULE drivers__core_heater
+	MAIN core_heater
+	COMPILE_FLAGS
+	SRCS
+		core_heater.cpp
+	)
diff --git a/boards/cuav/x25-super/core_heater/core_heater.cpp b/boards/cuav/x25-super/core_heater/core_heater.cpp
new file mode 100644
index 0000000000..89e0cc5696
--- /dev/null
+++ b/boards/cuav/x25-super/core_heater/core_heater.cpp
@@ -0,0 +1,261 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file core_heater.cpp
+ *
+ */
+
+#include "core_heater.h"
+
+#include <px4_platform_common/getopt.h>
+#include <px4_platform_common/log.h>
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_io_heater.h>
+
+#  ifndef GPIO_CORE_HEATER_OUTPUT
+#  error "To use the heater driver, the board_config.h must define and initialize GPIO_CORE_HEATER_OUTPUT"
+#  endif
+
+Core_Heater::Core_Heater() :
+	ModuleParams(nullptr),
+	ScheduledWorkItem(MODULE_NAME, px4::wq_configurations::lp_default)
+{
+	_heater_status_pub.advertise();
+}
+
+Core_Heater::~Core_Heater()
+{
+	disable_core_heater();
+}
+
+int Core_Heater::custom_command(int argc, char *argv[])
+{
+	// Check if the driver is running.
+	if (!is_running()) {
+		PX4_INFO("not running");
+		return PX4_ERROR;
+	}
+
+	return print_usage("Unrecognized command.");
+}
+
+void Core_Heater::disable_core_heater()
+{
+	// Reset heater to off state.
+	px4_arch_unconfiggpio(GPIO_CORE_HEATER_OUTPUT);
+}
+
+void Core_Heater::initialize_core_heater_io()
+{
+	// Initialize heater to off state.
+	px4_arch_configgpio(GPIO_CORE_HEATER_OUTPUT);
+}
+
+void Core_Heater::core_heater_off()
+{
+	CORE_HEATER_OUTPUT_EN(false);
+}
+
+void Core_Heater::core_heater_on()
+{
+	CORE_HEATER_OUTPUT_EN(true);
+}
+
+bool Core_Heater::initialize_topics()
+{
+	for (uint8_t i = 0; i < ORB_MULTI_MAX_INSTANCES; i++) {
+		uORB::SubscriptionData<sensor_accel_s> sensor_accel_sub{ORB_ID(sensor_accel), i};
+
+		if (sensor_accel_sub.get().timestamp != 0 &&
+		    sensor_accel_sub.get().device_id != 0 &&
+		    PX4_ISFINITE(sensor_accel_sub.get().temperature)) {
+
+			// If the correct ID is found, exit the for-loop with _sensor_accel_sub pointing to the correct instance.
+			if (sensor_accel_sub.get().device_id == (uint32_t)_param_core_temp_id.get()) {
+				_sensor_accel_sub.ChangeInstance(i);
+				_sensor_device_id = sensor_accel_sub.get().device_id;
+				initialize_core_heater_io();
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+void Core_Heater::Run()
+{
+	if (should_exit()) {
+		exit_and_cleanup();
+		return;
+	}
+
+	update_params();
+
+	if (_sensor_device_id == 0) {
+		if (!initialize_topics()) {
+			// if sensor still not found try again in 1 second
+			ScheduleDelayed(1_s);
+			return;
+		}
+	}
+
+	sensor_accel_s sensor_accel;
+	float temperature_delta {0.f};
+
+	if (_core_heater_on) {
+		// Turn the heater off.
+		_core_heater_on = false;
+		core_heater_off();
+		ScheduleDelayed(_controller_period_usec - _controller_time_on_usec);
+
+	} else if (_sensor_accel_sub.update(&sensor_accel)) {
+		// Update the current IMU sensor temperature if valid.
+		if (PX4_ISFINITE(sensor_accel.temperature)) {
+			temperature_delta = _param_core_imu_temp.get() - sensor_accel.temperature;
+			_temperature_last = sensor_accel.temperature;
+		}
+
+		_proportional_value = temperature_delta * _param_core_imu_temp_p.get();
+		_integrator_value += temperature_delta * _param_core_imu_temp_i.get();
+
+		_integrator_value = math::constrain(_integrator_value, -0.25f, 0.25f);
+
+		_controller_time_on_usec = static_cast<int>((_param_core_imu_temp_ff.get() + _proportional_value +
+					   _integrator_value) * static_cast<float>(_controller_period_usec));
+
+		_controller_time_on_usec = math::constrain(_controller_time_on_usec, 0, _controller_period_usec);
+
+		if (fabsf(temperature_delta) < TEMPERATURE_TARGET_THRESHOLD) {
+			_temperature_target_met = true;
+
+		} else {
+
+			_temperature_target_met = false;
+		}
+
+		_core_heater_on = true;
+		core_heater_on();
+		ScheduleDelayed(_controller_time_on_usec);
+	}
+
+	publish_status();
+}
+
+void Core_Heater::publish_status()
+{
+	heater_status_s status{};
+	status.device_id               = _sensor_device_id;
+	status.heater_on               = _core_heater_on;
+	status.temperature_sensor      = _temperature_last;
+	status.temperature_target      = _param_core_imu_temp.get();
+	status.temperature_target_met  = _temperature_target_met;
+	status.controller_period_usec  = _controller_period_usec;
+	status.controller_time_on_usec = _controller_time_on_usec;
+	status.proportional_value      = _proportional_value;
+	status.integrator_value        = _integrator_value;
+	status.feed_forward_value      = _param_core_imu_temp_ff.get();
+
+	status.mode = heater_status_s::MODE_GPIO;
+
+	status.timestamp = hrt_absolute_time();
+	_heater_status_pub.publish(status);
+}
+
+int Core_Heater::start()
+{
+	// Exit the driver if the sensor ID does not match the desired sensor.
+	if (_param_core_temp_id.get() == 0) {
+		PX4_ERR("Valid CORE_TEMP_ID required");
+		request_stop();
+		return PX4_ERROR;
+	}
+
+	update_params(true);
+	ScheduleNow();
+	return PX4_OK;
+}
+
+int Core_Heater::task_spawn(int argc, char *argv[])
+{
+	Core_Heater *core_heater = new Core_Heater();
+
+	if (!core_heater) {
+		PX4_ERR("driver allocation failed");
+		return PX4_ERROR;
+	}
+
+	_object.store(core_heater);
+	_task_id = task_id_is_work_queue;
+
+	core_heater->start();
+	return 0;
+}
+
+void Core_Heater::update_params(const bool force)
+{
+	if (_parameter_update_sub.updated() || force) {
+		// clear update
+		parameter_update_s param_update;
+		_parameter_update_sub.copy(&param_update);
+
+		// update parameters from storage
+		ModuleParams::updateParams();
+	}
+}
+
+int Core_Heater::print_usage(const char *reason)
+{
+	if (reason) {
+		printf("%s\n\n", reason);
+	}
+
+	PRINT_MODULE_DESCRIPTION(
+		R"DESCR_STR(
+### Description
+Background process running periodically on the LP work queue to regulate IMU temperature at a setpoint.
+
+)DESCR_STR");
+
+	PRINT_MODULE_USAGE_NAME("core_heater", "system");
+	PRINT_MODULE_USAGE_COMMAND("start");
+	PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
+
+	return 0;
+}
+
+extern "C" __EXPORT int core_heater_main(int argc, char *argv[])
+{
+	return Core_Heater::main(argc, argv);
+}
diff --git a/boards/cuav/x25-super/core_heater/core_heater.h b/boards/cuav/x25-super/core_heater/core_heater.h
new file mode 100644
index 0000000000..942d80c1a9
--- /dev/null
+++ b/boards/cuav/x25-super/core_heater/core_heater.h
@@ -0,0 +1,159 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file core_heater.h
+ *
+ */
+
+#pragma once
+
+#include <px4_platform_common/px4_config.h>
+#include <px4_platform_common/getopt.h>
+#include <px4_platform_common/module.h>
+#include <px4_platform_common/module_params.h>
+#include <px4_platform_common/px4_work_queue/ScheduledWorkItem.hpp>
+#include <uORB/Publication.hpp>
+#include <uORB/SubscriptionInterval.hpp>
+#include <uORB/topics/heater_status.h>
+#include <uORB/topics/parameter_update.h>
+#include <uORB/topics/sensor_accel.h>
+
+#include <mathlib/mathlib.h>
+
+using namespace time_literals;
+
+#define CONTROLLER_PERIOD_DEFAULT    10000
+#define TEMPERATURE_TARGET_THRESHOLD 2.5f
+
+class Core_Heater : public ModuleBase<Core_Heater>, public ModuleParams, public px4::ScheduledWorkItem
+{
+public:
+	Core_Heater();
+
+	virtual ~Core_Heater();
+
+	/**
+	 * @see ModuleBase::custom_command().
+	 * @brief main Main entry point to the module that should be
+	 *        called directly from the module's main method.
+	 * @param argc The input argument count.
+	 * @param argv Pointer to the input argument array.
+	 * @return Returns 0 iff successful, -1 otherwise.
+	 */
+	static int custom_command(int argc, char *argv[]);
+
+	/**
+	 * @see ModuleBase::print_usage().
+	 * @brief Prints the module usage to the nuttshell console.
+	 * @param reason The requested reason for printing to console.
+	 */
+	static int print_usage(const char *reason = nullptr);
+
+	/**
+	 * @see ModuleBase::task_spawn().
+	 * @brief Initializes the class in the same context as the work queue
+	 *        and starts the background listener.
+	 * @param argv Pointer to the input argument array.
+	 * @return Returns 0 iff successful, -1 otherwise.
+	 */
+	static int task_spawn(int argc, char *argv[]);
+
+	/**
+	 * @brief Initiates the heater driver work queue, starts a new background task,
+	 *        and fails if it is already running.
+	 * @return Returns 1 iff start was successful.
+	 */
+	int start();
+
+private:
+
+	/** Disables the heater (either by GPIO). */
+	void disable_core_heater();
+
+	/** Turns the heater on (either by GPIO). */
+	void core_heater_on();
+
+	/** Turns the heater off (either by GPIO). */
+	void core_heater_off();
+
+	void initialize();
+
+	/** Enables / configures the heater (either by GPIO). */
+	void initialize_core_heater_io();
+
+	/** @brief Called once to initialize uORB topics. */
+	bool initialize_topics();
+
+	void publish_status();
+
+	/** @brief Calculates the heater element on/off time and schedules the next cycle. */
+	void Run() override;
+
+	/**
+	 * @brief Updates and checks for updated uORB parameters.
+	 * @param force Boolean to determine if an update check should be forced.
+	 */
+	void update_params(const bool force = false);
+
+	/** Work queue struct for the scheduler. */
+	static struct work_s _work;
+
+	bool _core_heater_initialized     = false;
+	bool _core_heater_on              = false;
+	bool _temperature_target_met = false;
+
+	int _controller_period_usec = CONTROLLER_PERIOD_DEFAULT;
+	int _controller_time_on_usec = 0;
+
+	float _integrator_value   = 0.0f;
+	float _proportional_value = 0.0f;
+
+	uORB::Publication<heater_status_s> _heater_status_pub{ORB_ID(heater_status)};
+
+	uORB::SubscriptionInterval _parameter_update_sub{ORB_ID(parameter_update), 1_s};
+
+	uORB::Subscription _sensor_accel_sub{ORB_ID(sensor_accel)};
+
+	uint32_t _sensor_device_id{0};
+
+	float _temperature_last{NAN};
+
+	DEFINE_PARAMETERS(
+		(ParamFloat<px4::params::CORE_IMU_TEMP_FF>) _param_core_imu_temp_ff,
+		(ParamFloat<px4::params::CORE_IMU_TEMP_I>)  _param_core_imu_temp_i,
+		(ParamFloat<px4::params::CORE_IMU_TEMP_P>)  _param_core_imu_temp_p,
+		(ParamFloat<px4::params::CORE_IMU_TEMP>)    _param_core_imu_temp,
+		(ParamInt<px4::params::CORE_TEMP_ID>)       _param_core_temp_id
+	)
+};
diff --git a/boards/cuav/x25-super/core_heater/core_heater_params.c b/boards/cuav/x25-super/core_heater/core_heater_params.c
new file mode 100644
index 0000000000..b46575372b
--- /dev/null
+++ b/boards/cuav/x25-super/core_heater/core_heater_params.c
@@ -0,0 +1,94 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file core_heater_params.c
+ * Core Heater parameters.
+ *
+ */
+
+/**
+ * Target IMU device ID to regulate temperature.
+ *
+ * @category system
+ * @group Sensors
+ */
+PARAM_DEFINE_INT32(CORE_TEMP_ID, 0);
+
+/**
+ * Target IMU temperature.
+ *
+ * @category system
+ * @group Sensors
+ * @unit celcius
+ * @min 0
+ * @max 85.0
+ * @decimal 3
+ */
+PARAM_DEFINE_FLOAT(CORE_IMU_TEMP, 55.0f);
+
+/**
+ * IMU heater controller feedforward value.
+ *
+ * @category system
+ * @group Sensors
+ * @unit %
+ * @min 0
+ * @max 1.0
+ * @decimal 3
+ */
+PARAM_DEFINE_FLOAT(CORE_IMU_TEMP_FF, 0.05f);
+
+/**
+ * IMU heater controller integrator gain value.
+ *
+ * @category system
+ * @group Sensors
+ * @unit us/C
+ * @min 0
+ * @max 1.0
+ * @decimal 3
+ */
+PARAM_DEFINE_FLOAT(CORE_IMU_TEMP_I, 0.025f);
+
+/**
+ * IMU heater controller proportional gain value.
+ *
+ * @category system
+ * @group Sensors
+ * @unit us/C
+ * @min 0
+ * @max 2.0
+ * @decimal 3
+ */
+PARAM_DEFINE_FLOAT(CORE_IMU_TEMP_P, 1.0f);
diff --git a/boards/cuav/x25-super/default.px4board b/boards/cuav/x25-super/default.px4board
new file mode 100644
index 0000000000..b166d4d442
--- /dev/null
+++ b/boards/cuav/x25-super/default.px4board
@@ -0,0 +1,91 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ETHERNET=y
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
+CONFIG_BOARD_SERIAL_EXT2="/dev/ttyS3"
+CONFIG_DRIVERS_ADC_ADS1115=y
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_BMP581=y
+CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_HEATER=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
+CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_OSD_MSP_OSD=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_SAFETY_BUTTON=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_UXRCE_DDS_CLIENT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_GPIO=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_MTD=y
+CONFIG_SYSTEMCMDS_NETMAN=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
+CONFIG_ARCH_CHIP_STM32H7=y
diff --git a/boards/cuav/x25-super/extras/cuav_x25-super_bootloader.bin b/boards/cuav/x25-super/extras/cuav_x25-super_bootloader.bin
new file mode 100755
index 0000000000..807da71c00
Binary files /dev/null and b/boards/cuav/x25-super/extras/cuav_x25-super_bootloader.bin differ
diff --git a/boards/cuav/x25-super/firmware.prototype b/boards/cuav/x25-super/firmware.prototype
new file mode 100644
index 0000000000..e48f2ec587
--- /dev/null
+++ b/boards/cuav/x25-super/firmware.prototype
@@ -0,0 +1,13 @@
+{
+    "board_id": 7003,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the CUAVX25SUPER board",
+    "image": "",
+    "build_time": 0,
+    "summary": "CUAVX25SUPER",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1966080,
+    "git_identity": "",
+    "board_revision": 0
+}
diff --git a/boards/cuav/x25-super/init/rc.board_defaults b/boards/cuav/x25-super/init/rc.board_defaults
new file mode 100644
index 0000000000..b7d9f53450
--- /dev/null
+++ b/boards/cuav/x25-super/init/rc.board_defaults
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+Mavlink ethernet (CFG 1000)
+param set-default MAV_2_CONFIG 1000
+param set-default MAV_2_BROADCAST 1
+param set-default MAV_2_MODE 0
+param set-default MAV_2_RADIO_CTL 0
+param set-default MAV_2_RATE 100000
+param set-default MAV_2_REMOTE_PRT 14550
+param set-default MAV_2_UDP_PRT 14550
+
+param set-default SENS_EN_INA238 0
+param set-default SENS_EN_INA228 0
+param set-default SENS_EN_INA226 0
+
+param set-default USB_MAV_MODE 5
+
+param set-default UAVCAN_SUB_GPS 1
+param set-default UAVCAN_SUB_BAT 1
+
+# Enable IMU thermal control
+param set-default SENS_EN_THERMAL 1
+param set-default SENS_IMU_TEMP 45
+param set-default SENS_TEMP_ID 5963786
+
+# CUAV core board IMU thermal control
+param set-default CORE_IMU_TEMP 45
+param set-default CORE_TEMP_ID 3014698
+core_heater start
+
+# CUAV pwm voltage 3.3V/5V switch
+pwm_voltage_apply start
+
+safety_button start
+
+# Update IP config if needed
+netman update -i eth0
diff --git a/boards/cuav/x25-super/init/rc.board_sensors b/boards/cuav/x25-super/init/rc.board_sensors
new file mode 100644
index 0000000000..8a748aed52
--- /dev/null
+++ b/boards/cuav/x25-super/init/rc.board_sensors
@@ -0,0 +1,65 @@
+#!/bin/sh
+#
+# CUAV X25-SUPER specific board sensors init
+#------------------------------------------------------------------------------
+set HAVE_PM2 yes
+
+if mft query -q -k MFT -s MFT_PM2 -v 0
+then
+	set HAVE_PM2 no
+fi
+
+board_adc start
+
+if param compare -s ADC_ADS1115_EN 1
+then
+	ads1115 start -X
+	board_adc start -n
+else
+	board_adc start
+fi
+
+if param compare SENS_EN_INA226 1
+then
+	# Start Digital power monitors
+	ina226 -X -b 1 -t 1 -k start
+
+	if [ $HAVE_PM2 = yes ]
+	then
+		ina226 -X -b 2 -t 2 -k start
+	fi
+fi
+
+if param compare SENS_EN_INA228 1
+then
+	# Start Digital power monitors
+	ina228 -X -b 1 -t 1 -k start
+	if [ $HAVE_PM2 = yes ]
+	then
+		ina228 -X -b 2 -t 2 -k start
+	fi
+fi
+
+if param compare SENS_EN_INA238 1
+then
+	# Start Digital power monitors
+	ina238 -X -b 1 -t 1 -k start
+	if [ $HAVE_PM2 = yes ]
+	then
+		ina238 -X -b 2 -t 2 -k start
+	fi
+fi
+
+sch16t -s -R 2 -b 1 start
+iim42652 -s -b 2 -C 32768 start
+iim42653 -s -b 5 -R 12 start
+
+rm3100 -s -b 4 start
+
+bmp581 -s -b 4 start
+icp201xx -I -b 4 start
+
+# External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
+ist8310 -X -b 1 -R 10 start
+
+unset HAVE_PM2
diff --git a/boards/cuav/x25-super/nuttx-config/Kconfig b/boards/cuav/x25-super/nuttx-config/Kconfig
new file mode 100644
index 0000000000..bb33d3cfda
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/Kconfig
@@ -0,0 +1,17 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+config BOARD_HAS_PROBES
+	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
+	default y
+	---help---
+		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
+
+config BOARD_USE_PROBES
+	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
+	default n
+	depends on BOARD_HAS_PROBES
+
+	---help---
+		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.
diff --git a/boards/cuav/x25-super/nuttx-config/bootloader/defconfig b/boards/cuav/x25-super/nuttx-config/bootloader/defconfig
new file mode 100644
index 0000000000..28b9bfad94
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/bootloader/defconfig
@@ -0,0 +1,95 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x25-super/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743XI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004c
+CONFIG_CDCACM_PRODUCTSTR="PX4 BL CUAV X25-SUPER"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3163
+CONFIG_CDCACM_VENDORSTR="CUAV"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_UART5=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART5_RXBUFSIZE=512
+CONFIG_UART5_RXDMA=y
+CONFIG_UART5_TXBUFSIZE=512
+CONFIG_UART5_TXDMA=y
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
diff --git a/boards/cuav/x25-super/nuttx-config/include/board.h b/boards/cuav/x25-super/nuttx-config/include/board.h
new file mode 100644
index 0000000000..ce57165a0f
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/include/board.h
@@ -0,0 +1,565 @@
+/************************************************************************************
+ * nuttx-configs/cuav_x25-super/include/board.h
+ *
+ *   Copyright (C) 2016-2026 Gregory Nutt. All rights reserved.
+ *   Authors: David Sidrane <david.sidrane@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#ifndef __NUTTX_CONFIG_CUAV_X25_SUPER_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_CUAV_X25_SUPER_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The CUAV X25-SUPER board provides the following clock sources:
+ *
+ *   X1: 16 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE: 16 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        16000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 16,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+// #define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(60)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 60)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
+/* FDCAN 1 2 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The PX4 FMUV6X board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+/* LED definitions ******************************************************************/
+/* The px4_fmu-v6x board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3
+
+#define BOARD_LED_RED     BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_3      /* PB7 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_3      /* PB6 */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_1       /* PA3   */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5   */
+#define GPIO_USART2_RTS  GPIO_USART2_RTS_2      /* PD4   */
+#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2  /* PD3   */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9   */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8   */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_6    /* PH14 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_6    /* PH13 */
+
+#define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
+#define GPIO_UART5_TX    GPIO_UART5_TX_3    /* PC12 */
+// GPIO_UART5_RTS   no remap                /* PC8  */
+#undef GPIO_UART5_CTS
+#define GPIO_UART5_CTS   ((GPIO_ALT|GPIO_AF8|GPIO_PORTC|GPIO_PIN9) | GPIO_PULLDOWN)
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_4    /* PF6  */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
+#define GPIO_UART7_RTS   GPIO_UART7_RTS_2   /* PF8  */
+#define GPIO_UART7_CTS   (GPIO_UART7_CTS_1 | GPIO_PULLDOWN)   /* PE10 */
+
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1 */
+
+
+/* CAN
+ *
+ * CAN1 is routed to transceiver.
+ * CAN2 is routed to transceiver.
+ */
+#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
+#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
+#define GPIO_CAN2_RX     GPIO_CAN2_RX_1     /* PB12 */
+#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13  */
+
+/* SPI
+ * SPI1 is sensors1
+ * SPI2 is sensors2
+ * SPI3 is sensors3
+ * SPI4 is Not Used
+ * SPI5 is FRAM
+ * SPI6 is EXTERNAL1
+ *
+ */
+
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_50MHz))
+
+#define GPIO_SPI1_MISO   ADJ_SLEW_RATE(GPIO_SPI1_MISO_3)		/* PG9  */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_2               		/* PB5  */
+#define GPIO_SPI1_SCK    GPIO_SPI1_SCK_1 				/* PA5  */
+
+#define GPIO_SPI2_MISO   ADJ_SLEW_RATE(GPIO_SPI2_MISO_3)               	/* PI2  */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_4               		/* PI3  */
+#define GPIO_SPI2_SCK    GPIO_SPI2_SCK_6 				/* PI1  */
+
+#define GPIO_SPI4_MISO   ADJ_SLEW_RATE(GPIO_SPI4_MISO_1)               	/* PE13 */
+#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_1               		/* PE14  */
+#define GPIO_SPI4_SCK    GPIO_SPI4_SCK_1				/* PE12 */
+
+#define GPIO_SPI5_MISO   ADJ_SLEW_RATE(GPIO_SPI5_MISO_2)               	/* PH7  */
+#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_1               		/* PF11 */
+#define GPIO_SPI5_SCK    GPIO_SPI5_SCK_1 				/* PF7  */
+
+#define GPIO_SPI6_MISO   ADJ_SLEW_RATE(GPIO_SPI6_MISO_2)               	/* PA6  */
+#define GPIO_SPI6_MOSI   GPIO_SPI6_MOSI_1               		/* PG14 */
+#define GPIO_SPI6_SCK    GPIO_SPI6_SCK_3				/* PB3  */
+
+/* I2C
+ *
+ *   The optional _GPIO configurations allow the I2C driver to manually
+ *   reset the bus to clear stuck slaves.  They match the pin configuration,
+ *   but are normally-high GPIOs.
+ *
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2       /* PF1 */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2       /* PF0 */
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)
+
+#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1       /* PA8 */
+#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */
+
+#define GPIO_I2C3_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTA | GPIO_PIN8)
+#define GPIO_I2C3_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
+
+#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2       /* PF14 */
+#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2       /* PF15 */
+
+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
+
+/* SDMMC2
+ *
+ *      VDD 3.3
+ *      GND
+ *      SDMMC2_CK                           PD6
+ *      SDMMC2_CMD                          PD7
+ *      SDMMC2_D0                           PB14
+ *      SDMMC2_D1                           PB15
+ *      SDMMC2_D2                           PG11
+ *      SDMMC2_D3                           PB4
+ */
+
+#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_1  /* PD6 */
+#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7 */
+//      GPIO_SDMMC2_D0   No Remap          /* PB14 */
+//      GPIO_SDMMC2_D1   No Remap          /* PB15 */
+#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_1  /* PG11 */
+//      GPIO_SDMMC2_D3    No Remap         /* PB4 */
+
+/* The STM32 H7 connects to a TI DP83848TSQ/NOPB
+ * using RMII
+ *
+ *   STM32 H7 BOARD        DP83848TSQ/NOPB
+ *   GPIO     SIGNAL       PIN NAME
+ *   -------- ------------ -------------
+ *   PA7     ETH_CRS_DV    CRS_DV
+ *   PC1     ETH_MDC       MDC
+ *   PA2     ETH_MDIO      MDIO
+ *   PA1     ETH_REF_CL    X1
+ *   PC4     ETH_RXD0      RX_D0
+ *   PC5     ETH_RXD1      RX_D1
+ *   PB11    ETH_TX_EN     TX_EN
+ *   PG13    ETH_TXD0      TX_D0
+ *   PG12    ETH_TXD1      TX_D1
+ *
+ * The PHY address is 1, since COL/PHYAD0 features a pull up.
+ */
+
+#define GPIO_ETH_RMII_TX_EN	GPIO_ETH_RMII_TX_EN_1 /* PB11 */
+#define GPIO_ETH_RMII_TXD0	GPIO_ETH_RMII_TXD0_2  /* PG13 */
+#define GPIO_ETH_RMII_TXD1	GPIO_ETH_RMII_TXD1_2  /* PG12 */
+
+
+/* USB
+ *
+ *      OTG_FS_DM                           PA11
+ *      OTG_FS_DP                           PA12
+ *      VBUS                                PA9
+ */
+
+
+/* Board provides GPIO or other Hardware for signaling to timing analyzer */
+
+#if defined(CONFIG_BOARD_USE_PROBES)
+# include "stm32_gpio.h"
+# define PROBE_N(n) (1<<((n)-1))
+# define PROBE_1    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN0)   /* PI0 AUX1 */
+# define PROBE_2    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN12)  /* PH12 AUX2 */
+# define PROBE_3    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN11)  /* PH11 AUX3 */
+# define PROBE_4    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN10)  /* PH10 AUX4 */
+# define PROBE_5    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)  /* PD13 AUX5 */
+# define PROBE_6    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)  /* PD14 AUX6 */
+# define PROBE_7    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN6)   /* PH6  AUX7 */
+# define PROBE_8    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN9)   /* PH9  AUX8 */
+# define PROBE_9    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)  /* PE11  CAP1 */
+
+# define PROBE_INIT(mask) \
+	do { \
+		if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
+		if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
+		if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
+		if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
+		if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
+		if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
+		if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
+		if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
+		if ((mask)& PROBE_N(9)) { stm32_configgpio(PROBE_9); } \
+	} while(0)
+
+# define PROBE(n,s)  do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
+# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
+#else
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+#endif
+
+#endif  /*__NUTTX_CONFIG_CUAV_X25_SUPER_INCLUDE_BOARD_H  */
diff --git a/boards/cuav/x25-super/nuttx-config/include/board_dma_map.h b/boards/cuav/x25-super/nuttx-config/include/board_dma_map.h
new file mode 100644
index 0000000000..04051c4766
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/include/board_dma_map.h
@@ -0,0 +1,72 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37 SCH16T */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38 SCH16T */
+
+#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0     /* 3 DMA1:39 IIM42652 */
+#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0     /* 4 DMA1:40 IIM42652 */
+
+#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */
+
+// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI4_RX    DMAMAP_DMA12_SPI4RX_1     /* 1 DMA2:61 RM3100 */
+#define DMAMAP_SPI4_TX    DMAMAP_DMA12_SPI4TX_1     /* 2 DMA2:62 RM3100 */
+
+#define DMAMAP_SPI5_RX    DMAMAP_DMA12_SPI5RX_1     /* 1 DMA2:61 IIM42653 */
+#define DMAMAP_SPI5_TX    DMAMAP_DMA12_SPI5TX_1     /* 2 DMA2:62 IIM42653 */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66  TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  TELEM1 */
+
+// DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
+#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */
diff --git a/boards/cuav/x25-super/nuttx-config/nsh/defconfig b/boards/cuav/x25-super/nuttx-config/nsh/defconfig
new file mode 100644
index 0000000000..f08f8a5497
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/nsh/defconfig
@@ -0,0 +1,333 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_IFUPDOWN is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TELNETD is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x25-super/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743XI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004c
+CONFIG_CDCACM_PRODUCTSTR="PX4 CUAV X25-SUPER"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3163
+CONFIG_CDCACM_VENDORSTR="CUAV"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_ETH0_PHY_LAN8742A=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FSUTILS_IPCFG=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_THROTTLE=0
+CONFIG_IPCFG_BINARY=y
+CONFIG_IPCFG_CHARDEV=y
+CONFIG_IPCFG_PATH="/fs/mtd_net"
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NET=y
+CONFIG_NETDB_DNSCLIENT=y
+CONFIG_NETDB_DNSCLIENT_ENTRIES=8
+CONFIG_NETDB_DNSSERVER_NOADDR=y
+CONFIG_NETDEV_PHY_IOCTL=y
+CONFIG_NETINIT_DHCPC=y
+CONFIG_NETINIT_DNS=y
+CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
+CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_MONITOR=y
+CONFIG_NETINIT_THREAD=y
+CONFIG_NETINIT_THREAD_PRIORITY=49
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NET_ARP_IPIN=y
+CONFIG_NET_ARP_SEND=y
+CONFIG_NET_BROADCAST=y
+CONFIG_NET_ETH_PKTSIZE=1518
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_SOCKET=y
+CONFIG_NET_NACTIVESOCKETS=16
+CONFIG_NET_SOLINGER=y
+CONFIG_NET_TCP=y
+CONFIG_NET_TCPBACKLOG=y
+CONFIG_NET_TCP_DELAYED_ACK=y
+CONFIG_NET_TCP_WRITE_BUFFERS=y
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_WRITE_BUFFERS=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNET_LOGIN=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=6
+CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=6
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SDMMC2_SDIO_PULLUP=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_ETHMAC=y
+CONFIG_STM32H7_FLASH_OVERRIDE_I=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C3=y
+CONFIG_STM32H7_I2C4=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PHYSR=31
+CONFIG_STM32H7_PHYSR_100MBPS=0x8
+CONFIG_STM32H7_PHYSR_FULLDUPLEX=0x10
+CONFIG_STM32H7_PHYSR_MODE=0x10
+CONFIG_STM32H7_PHYSR_SPEED=0x8
+CONFIG_STM32H7_PHY_POLLING=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC2=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI1_DMA=y
+CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI2_DMA=y
+CONFIG_STM32H7_SPI2_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI4=y
+CONFIG_STM32H7_SPI4_DMA=y
+CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI5=y
+CONFIG_STM32H7_SPI5_DMA=y
+CONFIG_STM32H7_SPI5_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI6=y
+CONFIG_STM32H7_SPI6_DMA=y
+CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
+CONFIG_STM32H7_TIM12=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM5=y
+CONFIG_STM32H7_TIM8=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_DHCPC_RENEW=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_SYSTEM_PING=y
+CONFIG_SYSTEM_SYSTEM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART5_IFLOWCONTROL=y
+CONFIG_UART5_OFLOWCONTROL=y
+CONFIG_UART5_RXDMA=y
+CONFIG_UART5_TXBUFSIZE=10000
+CONFIG_UART5_TXDMA=y
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_IFLOWCONTROL=y
+CONFIG_UART7_OFLOWCONTROL=y
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_RXDMA=y
+CONFIG_UART7_TXBUFSIZE=3000
+CONFIG_UART7_TXDMA=y
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_RXDMA=y
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART1_TXDMA=y
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=3000
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_RXBUFSIZE=180
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_WATCHDOG=y
diff --git a/boards/cuav/x25-super/nuttx-config/scripts/bootloader_script.ld b/boards/cuav/x25-super/nuttx-config/scripts/bootloader_script.ld
new file mode 100644
index 0000000000..cbef5dc650
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/scripts/bootloader_script.ld
@@ -0,0 +1,215 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2026 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The PX4 FMUV6X uses an STM32H753II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The PX4 FMUV6X has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743II also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The bootloader uses the first sector of the flash, which is 128K in length.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/boards/cuav/x25-super/nuttx-config/scripts/script.ld b/boards/cuav/x25-super/nuttx-config/scripts/script.ld
new file mode 100644
index 0000000000..50fb8f8553
--- /dev/null
+++ b/boards/cuav/x25-super/nuttx-config/scripts/script.ld
@@ -0,0 +1,229 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2026 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The PX4 FMUV6X uses an STM32H753II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The PX4 FMUV6X has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743II also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
+
+	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
+	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
+	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
+	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+EXTERN(board_get_manifest)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > FLASH
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > FLASH
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > FLASH
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > FLASH
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > AXI_SRAM
+
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > SRAM4
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/boards/cuav/x25-super/pwm_voltage/CMakeLists.txt b/boards/cuav/x25-super/pwm_voltage/CMakeLists.txt
new file mode 100644
index 0000000000..44796cbbe5
--- /dev/null
+++ b/boards/cuav/x25-super/pwm_voltage/CMakeLists.txt
@@ -0,0 +1,42 @@
+############################################################################
+#
+#   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+px4_add_module(
+	MODULE modules__pwm_voltage_apply
+	MAIN pwm_voltage_apply
+
+	SRCS
+		pwm_voltage.cpp
+	DEPENDS
+		px4_work_queue
+	)
diff --git a/boards/cuav/x25-super/pwm_voltage/parameters.c b/boards/cuav/x25-super/pwm_voltage/parameters.c
new file mode 100644
index 0000000000..f8ebf15193
--- /dev/null
+++ b/boards/cuav/x25-super/pwm_voltage/parameters.c
@@ -0,0 +1,43 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * Control PWM output voltage
+ *
+ * @value 0 3.3V
+ * @value 1 5.0V
+ *
+ * @reboot_required true
+ * @group PWM Outputs
+ */
+PARAM_DEFINE_INT32(PWM_VOLT_SEL, 0);
diff --git a/boards/cuav/x25-super/pwm_voltage/pwm_voltage.cpp b/boards/cuav/x25-super/pwm_voltage/pwm_voltage.cpp
new file mode 100644
index 0000000000..5507de1965
--- /dev/null
+++ b/boards/cuav/x25-super/pwm_voltage/pwm_voltage.cpp
@@ -0,0 +1,56 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <inttypes.h>
+#include <stdint.h>
+
+#include <px4_platform_common/getopt.h>
+#include <px4_platform_common/module_params.h>
+
+#include "board_config.h"
+
+extern "C" int pwm_voltage_apply_main(int argc, char *argv[])
+{
+	int32_t pwm_volt_sel = 0;
+
+	param_get(param_find("PWM_VOLT_SEL"), &pwm_volt_sel);
+
+	if (pwm_volt_sel != 0) {
+		PWM_5V_VOLT_SEL(true);
+
+	} else {
+		PWM_5V_VOLT_SEL(false);
+	}
+
+	return 0;
+}
diff --git a/boards/cuav/x25-super/src/CMakeLists.txt b/boards/cuav/x25-super/src/CMakeLists.txt
new file mode 100644
index 0000000000..90734af2cb
--- /dev/null
+++ b/boards/cuav/x25-super/src/CMakeLists.txt
@@ -0,0 +1,75 @@
+############################################################################
+#
+#   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
+	add_compile_definitions(BOOTLOADER)
+	add_library(drivers_board
+		bootloader_main.c
+		init.c
+		usb.c
+		timer_config.cpp
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
+			px4_layer #gpio
+			arch_io_pins # iotimer
+			bootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+
+else()
+	add_library(drivers_board
+		can.c
+		i2c.cpp
+		init.c
+		led.c
+		mtd.cpp
+		sdio.c
+		spi.cpp
+		timer_config.cpp
+		usb.c
+	)
+	add_dependencies(drivers_board arch_board_hw_info)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_io_pins
+			arch_spi
+			arch_board_hw_info
+			drivers__led # drv_led_start
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
+			px4_layer
+	)
+endif()
diff --git a/boards/cuav/x25-super/src/board_config.h b/boards/cuav/x25-super/src/board_config.h
new file mode 100644
index 0000000000..32933ef340
--- /dev/null
+++ b/boards/cuav/x25-super/src/board_config.h
@@ -0,0 +1,509 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2016-2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * CUAV X25-SUPER internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+
+#include <stm32_gpio.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+
+#undef TRACE_PINS
+
+/* Configuration ************************************************************************************/
+
+#define BOARD_HAS_LTC44XX_VALIDS      2 //  N Bricks
+#define BOARD_HAS_USB_VALID           1 // LTC Has USB valid
+#define BOARD_HAS_NBAT_V              2d // 2 Digital Voltage
+#define BOARD_HAS_NBAT_I              2d // 2 Digital Current
+
+/* PX4FMU GPIOs ***********************************************************************************/
+
+/* LEDs are driven with push open drain to support Anode to 5V or 3.3V or used as TRACE0-2 */
+
+#  define GPIO_nLED_RED        /* PE3 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+#  define GPIO_nLED_GREEN      /* PE4 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
+#  define GPIO_nLED_BLUE       /* PE5 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
+
+#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
+#  define BOARD_OVERLOAD_LED     LED_RED
+#  define BOARD_ARMED_STATE_LED  LED_BLUE
+
+/* CAN Silence Silent mode control */
+
+#define GPIO_CAN1_SILENT_S0  /* PE2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN2)
+#define GPIO_CAN2_SILENT_S1  /* PI8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN8)
+
+/* SPI */
+
+#define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
+
+/* I2C busses */
+
+/* Devices on the onboard buses.
+ *
+ * Note that these are unshifted addresses.
+ */
+#define BOARD_MTD_NUM_EEPROM        1 /* MTD: imu_eeprom*/
+
+#define GPIO_I2C4_DRDY1_ICP20100    /* PG5  */  (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN5)
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that
+ * can be used by the Px4 Firmware in the adc driver
+ */
+
+/* ADC defines to be used in sensors.cpp to read from a particular channel */
+
+#define ADC1_CH(n)                  (n)
+
+/* N.B. there is no offset mapping needed for ADC3 because */
+#define ADC3_CH(n)                  (n)
+
+/* We are only use ADC3 for REV/VER.
+ * ADC3_6V6 and ADC3_3V3 are mapped back to ADC1
+ * To do this We are relying on PC2_C, PC3_C being connected to PC2, PC3
+ * respectively by the SYSCFG_PMCR default of setting for PC3SO PC2SO PA1SO
+ * PA0SO of 0.
+ *
+ *  0 Analog switch closed (pads are connected through the analog switch)
+ *
+ * So ADC3_INP0 is GPIO_ADC123_INP12
+ *    ADC3_INP1 is GPIO_ADC12_INP13
+ */
+
+/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
+
+#define PX4_ADC_GPIO  \
+	/* PA0  */  GPIO_ADC1_INP16,   \
+	/* PA4  */  GPIO_ADC12_INP18,  \
+	/* PB1  */  GPIO_ADC12_INP5,   \
+	/* PC0	*/  GPIO_ADC123_INP10, \
+	/* PC3  */  GPIO_ADC12_INP13,  \
+	/* PF12 */  GPIO_ADC1_INP6,    \
+	/* PH3  */  GPIO_ADC3_INP14,   \
+	/* PH4  */  GPIO_ADC3_INP15
+
+// TODO: PF3 ADC3 6V6
+/* Define Channel numbers must match above GPIO pin IN(n)*/
+#define ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL     /* PA0  */  ADC1_CH(16)
+#define ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL     /* PA4  */  ADC1_CH(18)
+#define ADC_SCALED_V5_CHANNEL                   /* PB1  */  ADC1_CH(5)
+#define ADC_RSSI_IN_CHANNEL			/* PC0  */  ADC1_CH(10)
+#define ADC_ADC3_3V3_CHANNEL                    /* PC3  */  ADC3_CH(13)
+#define ADC_SERVO_VDD_SENSORS_CHANNEL     	/* PF12 */  ADC1_CH(6)
+#define ADC_HW_VER_SENSE_CHANNEL                /* PH3  */  ADC3_CH(14)
+#define ADC_HW_REV_SENSE_CHANNEL                /* PH4  */  ADC3_CH(15)
+
+#define ADC_CHANNELS \
+	((1 << ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL) | \
+	 (1 << ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL) | \
+	 (1 << ADC_SCALED_V5_CHANNEL)               | \
+	 (1 << ADC_RSSI_IN_CHANNEL)		    | \
+	 (1 << ADC_ADC3_3V3_CHANNEL)                | \
+	 (1 << ADC_SERVO_VDD_SENSORS_CHANNEL))
+
+
+/* HW has to large of R termination on ADC todo:change when HW value is chosen */
+
+#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
+
+#define SYSTEM_ADC_BASE STM32_ADC1_BASE
+
+/* HW has to large of R termination on ADC todo:change when HW value is chosen */
+#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
+
+#define BOARD_ADC_BRICK_VALID          1
+
+/* HW Version and Revision drive signals Default to 1 to detect */
+// #define BOARD_HAS_HW_SPLIT_VERSIONING
+
+#define GPIO_HW_VER_REV_DRIVE  /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
+#define GPIO_HW_REV_SENSE      /* PH4 */  GPIO_ADC3_INP15
+#define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
+
+/* HEATER
+ * PWM in future
+ */
+// IMU BOARD HEATER
+#define GPIO_HEATER_OUTPUT        /* PB10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_HEATER_OUTPUT, (on_true))
+
+// CORE BOARD HEATER
+#define GPIO_CORE_HEATER_OUTPUT    /* PE6 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN6)
+#define CORE_HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_CORE_HEATER_OUTPUT, (on_true))
+
+/* PE7 is nARMED
+ *  The GPIO will be set as input while not armed HW will have external HW Pull UP.
+ *  While armed it shall be configured at a GPIO OUT set LOW
+ */
+#if !defined(TRACE_PINS)
+#define GPIO_nARMED_INIT     /* PE7 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN7)
+#define GPIO_nARMED          /* PE7 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN7)
+#define BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE(enabled)  px4_arch_configgpio((enabled) ? GPIO_nARMED : GPIO_nARMED_INIT)
+#define BOARD_GET_EXTERNAL_LOCKOUT_STATE() px4_arch_gpioread(GPIO_nARMED)
+#endif
+
+/* PWM
+ */
+#define DIRECT_PWM_OUTPUT_CHANNELS   16
+
+/* PWM Power */
+#define GPIO_PWM_VOLT_SEL		/* PG8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN8)
+#define PWM_5V_VOLT_SEL(on_true)	px4_arch_gpiowrite(GPIO_PWM_VOLT_SEL, (on_true))
+
+/* Power supply control and monitoring GPIOs */
+
+#define GPIO_nPOWER_IN_A                /* PJ1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN1)
+#define GPIO_nPOWER_IN_B                /* PJ2  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN2)
+#define GPIO_nPOWER_IN_C                /* PJ3  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN3)
+
+#define GPIO_nVDD_BRICK1_VALID          GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
+#define GPIO_nVDD_BRICK2_VALID          GPIO_nPOWER_IN_B /* Brick 2 Is Chosen  */
+#define BOARD_NUMBER_BRICKS             2
+#define BOARD_NUMBER_DIGITAL_BRICKS     2
+#define GPIO_nVDD_USB_VALID             GPIO_nPOWER_IN_C /* USB     Is Chosen */
+
+#define GPIO_VDD_3V3_SD_CARD_EN         /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+#define GPIO_VDD_5V_PERIPH_nOC          /* PE15 */ (GPIO_INPUT |GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
+#define GPIO_VDD_5V_HIPOWER_nOC         /* PF13 */ (GPIO_INPUT |GPIO_PULLUP|GPIO_PORTF|GPIO_PIN13)
+#define GPIO_VDD_5V_PERIPH_EN           /* PG4  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN4)
+#define GPIO_VDD_5V_HIPOWER_EN          /* PG10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN10)
+#define GPIO_VDD_PWM_POWER_EN  		/* PH2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN2)
+#define GPIO_VDD_3V3_SENSORS1_EN	/* PI11 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN4)
+#define GPIO_VDD_3V3_SENSORS3_EN	/* PI4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN4)
+#define GPIO_VDD_5V_RC_EN	        /* PJ5 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTJ|GPIO_PIN5)
+
+/* Spare GPIO */
+
+#define GPIO_PA10			/* PA10 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN10)
+#define GPIO_PA15			/* PA15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN15)
+#define BATT_VOLTAGE_SENS		/* PB0 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN0)
+#define SPI3_MOSI			/* PB2 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN2)
+#define BATT_CURRENT_SENS		/* PC0 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN0)
+#define SPI3_SCK			/* PC10 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN10)
+#define SPI3_MISO			/* PC11 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN11)
+#define GPIO_ADC_6V6			/* PF3 */  (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTF|GPIO_PIN3)
+#define GPIO_PG2			/* PG2 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN2)
+#define GPIO_PI9			/* PI9 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTI|GPIO_PIN9)
+#define GPIO_PI12			/* PI12 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTI|GPIO_PIN12)
+#define GPIO_PI13			/* PI13 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTI|GPIO_PIN13)
+#define GPIO_PI14			/* PI14 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTI|GPIO_PIN14)
+#define GPIO_PI15			/* PI15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTI|GPIO_PIN15)
+#define GPIO_PJ7			/* PJ7 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN7)
+#define GPIO_PJ8			/* PJ8 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN8)
+#define GPIO_PJ10			/* PJ10 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN10)
+#define GPIO_PJ13			/* PJ13 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN13)
+#define GPIO_PJ14			/* PJ14 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN14)
+#define GPIO_PJ15			/* PJ15 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTJ|GPIO_PIN15)
+#define GPIO_PK0			/* PK0 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN0)
+#define GPIO_PK1			/* PK1 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN1)
+#define GPIO_PK2			/* PK2 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN2)
+#define GPIO_PK3			/* PK3 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN3)
+#define GPIO_PK4			/* PK4 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN4)
+#define GPIO_PK5			/* PK5 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN5)
+#define GPIO_PK6			/* PK6 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN6)
+#define GPIO_PK7			/* PK7 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTK|GPIO_PIN7)
+
+/* ETHERNET GPIO */
+
+#define GPIO_ETH_POWER_EN              /* PG15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN15)
+
+/* Define True logic Power Control in arch agnostic form */
+#define VDD_5V_PERIPH_EN(on_true)		px4_arch_gpiowrite(GPIO_VDD_5V_PERIPH_EN, (on_true))
+#define VDD_5V_HIPOWER_EN(on_true)         	px4_arch_gpiowrite(GPIO_VDD_5V_HIPOWER_EN, (on_true))
+#define VDD_PWM_POWER_EN(on_true)		px4_arch_gpiowrite(GPIO_VDD_PWM_POWER_EN, (on_true))
+#define VDD_3V3_SD_CARD_EN(on_true)        	px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
+#define VDD_3V3_ETH_POWER_EN(on_true)      	px4_arch_gpiowrite(GPIO_ETH_POWER_EN, (on_true))
+#define VDD_3V3_SENSORS1_EN(on_true)	   	px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS1_EN, (on_true))
+#define VDD_3V3_SENSORS3_EN(on_true)	   	px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS3_EN, (on_true))
+#define VDD_5V_RC_EN(on_true)                   px4_arch_gpiowrite(GPIO_VDD_5V_RC_EN, (on_true))
+
+
+/* Tone alarm output */
+
+#define TONE_ALARM_TIMER        14  /* Timer 14 */
+#define TONE_ALARM_CHANNEL      1  /* PF9 GPIO_TIM14_CH1OUT_2 */
+
+#define GPIO_BUZZER_1           /* PF9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
+
+#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
+#define GPIO_TONE_ALARM         GPIO_TIM14_CH1OUT_2
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
+
+/* High-resolution timer */
+#define HRT_TIMER               3  /* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL       2  /* use capture/compare channel 3 */
+
+#define HRT_PPM_CHANNEL         /* T8C1 */  1  /* use capture/compare channel 1 */
+#define GPIO_PPM_IN       	/* PC6 T8C1 */ GPIO_TIM3_CH1IN_3
+
+/* RC Serial port */
+
+#define RC_SERIAL_PORT                     "/dev/ttyS5"
+#define RC_SERIAL_SINGLEWIRE
+
+/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
+#define PWMIN_TIMER                       4
+#define PWMIN_TIMER_CHANNEL    /* T4C2 */ 2
+#define GPIO_PWM_IN            /* PD13 */ GPIO_TIM4_CH2IN_2
+
+/* Safety Switch is HW version dependent on having an PX4IO
+ * So we init to a benign state with the _INIT definition
+ * and provide the the non _INIT one for the driver to make a run time
+ * decision to use it.
+ */
+#define GPIO_nSAFETY_SWITCH_LED_OUT_INIT   /* PD10 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN10)
+#define GPIO_nSAFETY_SWITCH_LED_OUT        /* PD10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
+
+/* Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */
+#define GPIO_LED_SAFETY GPIO_nSAFETY_SWITCH_LED_OUT
+
+#define GPIO_SAFETY_SWITCH_IN              /* PF5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTF|GPIO_PIN5)
+/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */
+#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */
+
+/* Power switch controls ******************************************************/
+
+// #define SPEKTRUM_POWER(_on_true)           VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
+
+/*
+ * FMUv6X has a separate RC_IN
+ *
+ * GPIO PPM_IN on PI5 T8CH1
+ * SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
+ *   Inversion is possible in the UART and can drive  GPIO PPM_IN as an output
+ */
+
+#define GPIO_PPM_IN_AS_OUT             (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN6)
+#define SPEKTRUM_RX_AS_GPIO_OUTPUT()   px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
+#define SPEKTRUM_RX_AS_UART()          /* Can be left as uart */
+#define SPEKTRUM_OUT(_one_true)        px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
+
+// /* RSSI_IN */
+#define GPIO_RSSI_IN                   /* PC0  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN0)
+
+#define SDIO_SLOTNO                    0  /* Only one slot */
+#define SDIO_MINOR                     0
+
+/* SD card bringup does not work if performed on the IDLE thread because it
+ * will cause waiting.  Use either:
+ *
+ *  CONFIG_BOARDCTL=y, OR
+ *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
+ */
+
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && \
+   !defined(CONFIG_BOARD_INITTHREAD)
+#  warning SDIO initialization cannot be perfomed on the IDLE thread
+#endif
+
+/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
+ * this board support the ADC system_power interface, and therefore
+ * provides the true logic GPIO BOARD_ADC_xxxx macros.
+ */
+#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
+#define BOARD_ADC_USB_VALID     (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
+
+/* FMUv6X never powers off the Servo rail */
+
+#define BOARD_ADC_SERVO_VALID     (1)
+
+#if !defined(BOARD_HAS_LTC44XX_VALIDS) || BOARD_HAS_LTC44XX_VALIDS == 0
+#  define BOARD_ADC_BRICK1_VALID  (1)
+#  define BOARD_ADC_BRICK2_VALID  (0)
+#elif BOARD_HAS_LTC44XX_VALIDS == 1
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (0)
+#elif BOARD_HAS_LTC44XX_VALIDS == 2
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#elif BOARD_HAS_LTC44XX_VALIDS == 3
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
+#elif BOARD_HAS_LTC44XX_VALIDS == 4
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
+#  define BOARD_ADC_BRICK4_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK4_VALID))
+#else
+#  error Unsupported BOARD_HAS_LTC44XX_VALIDS value
+#endif
+
+#define BOARD_ADC_PERIPH_5V_OC  (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_nOC))
+#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_nOC))
+
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+/* This board provides the board_on_reset interface */
+
+#define BOARD_HAS_ON_RESET 1
+
+#define PX4_GPIO_INIT_LIST { \
+		PX4_ADC_GPIO,                   \
+		GPIO_HW_VER_REV_DRIVE,          \
+		GPIO_CAN1_TX,                   \
+		GPIO_CAN1_RX,                   \
+		GPIO_CAN2_TX,                   \
+		GPIO_CAN2_RX,                   \
+		GPIO_CAN1_SILENT_S0,		\
+		GPIO_CAN2_SILENT_S1,            \
+		GPIO_HEATER_OUTPUT,             \
+		GPIO_CORE_HEATER_OUTPUT,	\
+		GPIO_nPOWER_IN_A,               \
+		GPIO_nPOWER_IN_B,               \
+		GPIO_nPOWER_IN_C,               \
+		GPIO_VDD_5V_PERIPH_EN,          \
+		GPIO_VDD_5V_PERIPH_nOC,         \
+		GPIO_VDD_5V_HIPOWER_EN,         \
+		GPIO_VDD_5V_HIPOWER_nOC,       	\
+		GPIO_VDD_PWM_POWER_EN,  	\
+		GPIO_VDD_3V3_SD_CARD_EN,        \
+		GPIO_VDD_3V3_SENSORS3_EN,	\
+		GPIO_VDD_3V3_SENSORS1_EN,	\
+		GPIO_VDD_5V_RC_EN,	        \
+		GPIO_ETH_POWER_EN,              \
+		GPIO_TONE_ALARM_IDLE,           \
+		GPIO_nSAFETY_SWITCH_LED_OUT, 	\
+		GPIO_SAFETY_SWITCH_IN,          \
+		GPIO_nARMED_INIT,               \
+		GPIO_PWM_VOLT_SEL,		\
+		GPIO_PA10,			\
+		GPIO_PA15,			\
+		BATT_VOLTAGE_SENS,		\
+		SPI3_MOSI,			\
+		BATT_CURRENT_SENS,		\
+		SPI3_SCK,			\
+		SPI3_MISO,			\
+		GPIO_ADC_6V6,			\
+		GPIO_PG2,			\
+		GPIO_PI9,			\
+		GPIO_PI12,			\
+		GPIO_PI13,			\
+		GPIO_PI14,			\
+		GPIO_PI15,			\
+		GPIO_PJ7,			\
+		GPIO_PJ8,			\
+		GPIO_PJ10,			\
+		GPIO_PJ13,			\
+		GPIO_PJ14,			\
+		GPIO_PJ15,			\
+		GPIO_PK0,			\
+		GPIO_PK1,			\
+		GPIO_PK2,			\
+		GPIO_PK3,			\
+		GPIO_PK4,			\
+		GPIO_PK5,			\
+		GPIO_PK6,			\
+		GPIO_PK7,			\
+	}
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+#define PX4_I2C_BUS_MTD      4
+
+
+#define BOARD_NUM_IO_TIMERS 5
+#define BOARD_SPI_BUS_MAX_BUS_ITEMS 5
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void);
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS
diff --git a/boards/cuav/x25-super/src/bootloader_main.c b/boards/cuav/x25-super/src/bootloader_main.c
new file mode 100644
index 0000000000..d61cbe306c
--- /dev/null
+++ b/boards/cuav/x25-super/src/bootloader_main.c
@@ -0,0 +1,62 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2019-2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file bootloader_main.c
+ *
+ * FMU-specific early startup code for bootloader
+*/
+
+#include "board_config.h"
+#include "bl.h"
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+#include <px4_platform_common/init.h>
+
+extern int sercon_main(int c, char **argv);
+
+void board_late_initialize(void)
+{
+	sercon_main(0, NULL);
+}
+
+extern void sys_tick_handler(void);
+void board_timerhook(void)
+{
+	sys_tick_handler();
+}
diff --git a/boards/cuav/x25-super/src/can.c b/boards/cuav/x25-super/src/can.c
new file mode 100644
index 0000000000..40b6c68692
--- /dev/null
+++ b/boards/cuav/x25-super/src/can.c
@@ -0,0 +1,123 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file x25-super_can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+#ifdef CONFIG_CAN
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+
+#include "chip.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+#endif /* CONFIG_CAN */
diff --git a/boards/cuav/x25-super/src/hw_config.h b/boards/cuav/x25-super/src/hw_config.h
new file mode 100644
index 0000000000..ba1f8684b8
--- /dev/null
+++ b/boards/cuav/x25-super/src/hw_config.h
@@ -0,0 +1,128 @@
+/*
+ * hw_config.h
+ *
+ *  Created on: May 17, 2015
+ *      Author: david_s5
+ */
+
+#ifndef HW_CONFIG_H_
+#define HW_CONFIG_H_
+
+/****************************************************************************
+ * 10-8--2016:
+ *  To simplify the ripple effect on the tools, we will be using
+ *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
+ *  moving forward all Bootloaders must contain the prefix "PX4 BL "
+ *  in the USBDEVICESTRING
+ *  This Change will be made in an upcoming BL release
+ ****************************************************************************/
+/*
+ * Define usage to configure a bootloader
+ *
+ *
+ * Constant                example          Usage
+ * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
+ * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
+ * BOARD_FMUV2
+ * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
+ * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
+ * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
+ * USBPRODUCTID         0x0011                - PID Should match defconfig
+ * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
+ *                                               delay provided by an APP FW
+ * BOARD_TYPE           9                     - Must match .prototype boad_id
+ * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
+ * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
+ * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
+ * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
+ *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
+ *                                              programmatically
+ *
+ * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
+ *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
+ *                                               during a FW upgrade.
+ *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
+ *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
+ *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
+ *                                               in the table.
+ *
+ * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
+ *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
+ *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
+ *                                                                        and hence the address space of FLASH to erase and program.
+ * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
+ * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
+ *
+ * * Other defines are somewhat self explanatory.
+ */
+
+/* Boot device selection list*/
+#define USB0_DEV       0x01
+#define SERIAL0_DEV    0x02
+#define SERIAL1_DEV    0x04
+
+#define APP_LOAD_ADDRESS               0x08020000
+#define BOOTLOADER_DELAY               5000
+#define INTERFACE_USB                  1
+#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
+#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
+
+//#define USE_VBUS_PULL_DOWN
+#define INTERFACE_USART                1
+#define INTERFACE_USART_CONFIG         "/dev/ttyS0,1500000"
+#define BOOT_DELAY_ADDRESS             0x000001a0
+#define BOARD_TYPE                     7003
+#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
+#define BOARD_FLASH_SECTORS            (15)
+#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
+
+#define OSC_FREQ                       16
+
+#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
+#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
+#define BOARD_LED_ON                   0
+#define BOARD_LED_OFF                  1
+
+#define SERIAL_BREAK_DETECT_DISABLED   1
+
+/*
+ * Uncommenting this allows to force the bootloader through
+ * a PWM output pin. As this can accidentally initialize
+ * an ESC prematurely, it is not recommended. This feature
+ * has not been used and hence defaults now to off.
+ *
+ * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
+ * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
+ *
+ * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
+ * # define BOARD_POWER_ON                 1
+ * # define BOARD_POWER_OFF                0
+ * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
+ *
+*/
+
+#if !defined(ARCH_SN_MAX_LENGTH)
+# define ARCH_SN_MAX_LENGTH 12
+#endif
+
+#if !defined(APP_RESERVATION_SIZE)
+#  define APP_RESERVATION_SIZE 0
+#endif
+
+#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
+#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
+#endif
+
+#if !defined(USB_DATA_ALIGN)
+# define USB_DATA_ALIGN
+#endif
+
+#ifndef BOOT_DEVICES_SELECTION
+#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#ifndef BOOT_DEVICES_FILTER_ONUSB
+#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#endif /* HW_CONFIG_H_ */
diff --git a/boards/cuav/x25-super/src/i2c.cpp b/boards/cuav/x25-super/src/i2c.cpp
new file mode 100644
index 0000000000..1d363cfe27
--- /dev/null
+++ b/boards/cuav/x25-super/src/i2c.cpp
@@ -0,0 +1,41 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(1),
+	initI2CBusExternal(2),
+	initI2CBusExternal(3),
+	initI2CBusInternal(4),
+};
diff --git a/boards/cuav/x25-super/src/init.c b/boards/cuav/x25-super/src/init.c
new file mode 100644
index 0000000000..96a6386fd6
--- /dev/null
+++ b/boards/cuav/x25-super/src/init.c
@@ -0,0 +1,277 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2012-2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * PX4FMU-specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include "board_config.h"
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <nuttx/analog/adc.h>
+#include <nuttx/mm/gran.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <systemlib/px4_macros.h>
+#include <px4_arch/io_timer.h>
+#include <px4_platform_common/init.h>
+#include <px4_platform_common/px4_manifest.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_determine_hw_info.h>
+#include <px4_platform/board_dma_alloc.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+
+/************************************************************************************
+ * Name: board_peripheral_reset
+ *
+ * Description:
+ *
+ ************************************************************************************/
+__EXPORT void board_peripheral_reset(int ms)
+{
+	/* set the peripheral rails off */
+
+	VDD_5V_PERIPH_EN(false);
+	VDD_3V3_SENSORS1_EN(false);
+	VDD_3V3_SENSORS3_EN(false);
+
+	board_control_spi_sensors_power(false, 0xffff);
+
+	/* wait for the peripheral rail to reach GND */
+	usleep(ms * 1000);
+	syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
+
+	/* re-enable power */
+
+	/* switch the peripheral rail back on */
+	board_control_spi_sensors_power(true, 0xffff);
+	VDD_5V_PERIPH_EN(true);
+	VDD_3V3_SENSORS1_EN(true);
+	VDD_3V3_SENSORS3_EN(true);
+}
+
+/************************************************************************************
+ * Name: board_on_reset
+ *
+ * Description:
+ * Optionally provided function called on entry to board_system_reset
+ * It should perform any house keeping prior to the rest.
+ *
+ * status - 1 if resetting to boot loader
+ *          0 if just resetting
+ *
+ ************************************************************************************/
+__EXPORT void board_on_reset(int status)
+{
+	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
+		px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
+	}
+
+	if (status >= 0) {
+		up_mdelay(100);
+	}
+}
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void
+stm32_boardinitialize(void)
+{
+	board_on_reset(-1); /* Reset PWM first thing */
+
+	/* configure LEDs */
+
+	board_autoled_initialize();
+
+	/* configure pins */
+
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	/* configure USB interfaces */
+
+	stm32_usbinitialize();
+
+	VDD_3V3_ETH_POWER_EN(true);
+
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+#if !defined(BOOTLOADER)
+
+	/* Power on Interfaces */
+	VDD_3V3_SD_CARD_EN(true);
+	VDD_5V_PERIPH_EN(true);
+	VDD_5V_HIPOWER_EN(true);
+	VDD_PWM_POWER_EN(true);
+	VDD_3V3_SENSORS1_EN(true);
+	VDD_3V3_SENSORS3_EN(true);
+	VDD_5V_RC_EN(true);
+
+	/* Need hrt running before using the ADC */
+
+	px4_platform_init();
+
+	// Use the default HW_VER_REV(0x0,0x0) for Ramtron
+
+	stm32_spiinitialize();
+
+	/* Configure the HW based on the manifest */
+
+	px4_platform_configure();
+
+	/* Configure the Actual SPI interfaces (after we determined the HW version)  */
+
+	stm32_spiinitialize();
+
+	board_spi_reset(10, 0xffff);
+
+	/* Configure the DMA allocator */
+
+	if (board_dma_alloc_init() < 0) {
+		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
+	}
+
+#  if defined(SERIAL_HAVE_RXDMA)
+	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#  endif
+
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_RED);
+	led_on(LED_GREEN); // Indicate Power.
+	led_off(LED_BLUE);
+
+	if (board_hardfault_init(2, true) != 0) {
+		led_on(LED_RED);
+	}
+
+	// Ensure Power is off for > 10 mS
+	usleep(15 * 1000);
+	VDD_3V3_SD_CARD_EN(true);
+	usleep(500 * 1000);
+
+#  ifdef CONFIG_MMCSD
+	int ret = stm32_sdio_initialize();
+
+	if (ret != OK) {
+		led_on(LED_RED);
+		return ret;
+	}
+
+#  endif /* CONFIG_MMCSD */
+
+#endif /* !defined(BOOTLOADER) */
+
+	return OK;
+}
diff --git a/boards/cuav/x25-super/src/led.c b/boards/cuav/x25-super/src/led.c
new file mode 100644
index 0000000000..4e468eeae3
--- /dev/null
+++ b/boards/cuav/x25-super/src/led.c
@@ -0,0 +1,236 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file fmu_led.c
+ *
+ * PX4FMU LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+#ifdef CONFIG_ARCH_LEDS
+static bool nuttx_owns_leds = true;
+//                                B  R  S  G
+//                                0  1  2  3
+static const uint8_t xlatpx4[] = {1, 2, 4, 0};
+#  define xlat(p) xlatpx4[(p)]
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
+	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
+	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
+	GPIO_nSAFETY_SWITCH_LED_OUT,  // Indexed by LED_SAFETY by xlatpx4
+};
+
+#else
+
+#  define xlat(p) (p)
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
+	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
+	GPIO_nSAFETY_SWITCH_LED_OUT,   	    // Indexed by LED_SAFETY (defaulted to an input)
+	GPIO_nLED_GREEN,                    // Indexed by LED_GREEN
+};
+
+#endif
+
+__EXPORT void led_init(void)
+{
+
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		if (g_ledmap[l] != 0) {
+			stm32_configgpio(g_ledmap[l]);
+		}
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Drive Low to switch on */
+
+	if (g_ledmap[led] != 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+
+static bool phy_get_led(int led)
+{
+	/* If Low it is on */
+	if (g_ledmap[led] != 0) {
+		return !stm32_gpioread(g_ledmap[led]);
+	}
+
+	return false;
+}
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(xlat(led), true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(xlat(led), false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
+}
+
+#ifdef CONFIG_ARCH_LEDS
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+	led_init();
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+	if (!nuttx_owns_leds) {
+		return;
+	}
+
+	switch (led) {
+	default:
+		break;
+
+	case LED_HEAPALLOCATE:
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_IRQSENABLED:
+		phy_set_led(BOARD_LED_BLUE, false);
+		phy_set_led(BOARD_LED_GREEN, true);
+		break;
+
+	case LED_STACKCREATED:
+		phy_set_led(BOARD_LED_GREEN, true);
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_INIRQ:
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_SIGNAL:
+		phy_set_led(BOARD_LED_GREEN, true);
+		break;
+
+	case LED_ASSERTION:
+		phy_set_led(BOARD_LED_RED, true);
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_PANIC:
+		phy_set_led(BOARD_LED_RED, true);
+		break;
+
+	case LED_IDLE : /* IDLE */
+		phy_set_led(BOARD_LED_RED, true);
+		break;
+	}
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+	if (!nuttx_owns_leds) {
+		return;
+	}
+
+	switch (led) {
+	default:
+		break;
+
+	case LED_SIGNAL:
+		phy_set_led(BOARD_LED_GREEN, false);
+		break;
+
+	case LED_INIRQ:
+		phy_set_led(BOARD_LED_BLUE, false);
+		break;
+
+	case LED_ASSERTION:
+		phy_set_led(BOARD_LED_RED, false);
+		phy_set_led(BOARD_LED_BLUE, false);
+		break;
+
+	case LED_PANIC:
+		phy_set_led(BOARD_LED_RED, false);
+		break;
+
+	case LED_IDLE : /* IDLE */
+		phy_set_led(BOARD_LED_RED, false);
+		break;
+	}
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/boards/cuav/x25-super/src/mtd.cpp b/boards/cuav/x25-super/src/mtd.cpp
new file mode 100644
index 0000000000..cf072058c9
--- /dev/null
+++ b/boards/cuav/x25-super/src/mtd.cpp
@@ -0,0 +1,102 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <board_config.h>
+
+#include <nuttx/spi/spi.h>
+#include <px4_platform_common/px4_manifest.h>
+//                                                              KiB BS    nB
+static const px4_mft_device_t spi5 = {             // FM25V05A on FMUM native: 64K X 8, emulated as (1024 Blocks of 64)
+	.bus_type = px4_mft_device_t::SPI,
+	.devid    = SPIDEV_FLASH(0)
+};
+static const px4_mft_device_t i2c4 = {             // 24LC64T on IMU   8K 32 X 256
+	.bus_type =  px4_mft_device_t::I2C,
+	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
+};
+
+static const px4_mtd_entry_t fmum_fram = {
+	.device = &spi5,
+	.npart = 1,
+	.partd = {
+		{
+			.type = MTD_PARAMETERS,
+			.path = "/fs/mtd_params",
+			.nblocks = (65536 / (1 << CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT))
+		}
+	},
+};
+
+static const px4_mtd_entry_t imu_eeprom = {
+	.device = &i2c4,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_CALDATA,
+			.path = "/fs/mtd_caldata",
+			.nblocks = 248
+		},
+		{
+			.type = MTD_NET,
+			.path = "/fs/mtd_net",
+			.nblocks = 8 // 256 = 32 * 8
+		}
+	},
+};
+
+static const px4_mtd_manifest_t board_mtd_config = {
+	.nconfigs   = 2,
+	.entries = {
+		&fmum_fram,
+		&imu_eeprom
+	}
+};
+
+static const px4_mft_entry_s mtd_mft = {
+	.type = MTD,
+	.pmft = (void *) &board_mtd_config,
+};
+
+
+static const px4_mft_s mft = {
+	.nmft = 1,
+	.mfts = {
+		&mtd_mft,
+	}
+};
+
+const px4_mft_s *board_get_manifest(void)
+{
+	return &mft;
+}
diff --git a/boards/cuav/x25-super/src/sdio.c b/boards/cuav/x25-super/src/sdio.c
new file mode 100644
index 0000000000..3c295fdf95
--- /dev/null
+++ b/boards/cuav/x25-super/src/sdio.c
@@ -0,0 +1,177 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2014, 2026 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <board_config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+
+#include "chip.h"
+#include "board_config.h"
+#include "stm32_gpio.h"
+#include "stm32_sdmmc.h"
+
+#ifdef CONFIG_MMCSD
+
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Card detections requires card support and a card detection GPIO */
+
+#define HAVE_NCD   1
+#if !defined(GPIO_SDMMC1_NCD)
+#  undef HAVE_NCD
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static FAR struct sdio_dev_s *sdio_dev;
+#ifdef HAVE_NCD
+static bool g_sd_inserted = 0xff; /* Impossible value */
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_ncd_interrupt
+ *
+ * Description:
+ *   Card detect interrupt handler.
+ *
+ ****************************************************************************/
+
+#ifdef HAVE_NCD
+static int stm32_ncd_interrupt(int irq, FAR void *context)
+{
+	bool present;
+
+	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
+
+	if (sdio_dev && present != g_sd_inserted) {
+		sdio_mediachange(sdio_dev, present);
+		g_sd_inserted = present;
+	}
+
+	return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void)
+{
+	int ret;
+
+#ifdef HAVE_NCD
+	/* Card detect */
+
+	bool cd_status;
+
+	/* Configure the card detect GPIO */
+
+	stm32_configgpio(GPIO_SDMMC1_NCD);
+
+	/* Register an interrupt handler for the card detect pin */
+
+	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
+#endif
+
+	/* Mount the SDIO-based MMC/SD block driver */
+	/* First, get an instance of the SDIO interface */
+
+	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
+
+	sdio_dev = sdio_initialize(SDIO_SLOTNO);
+
+	if (!sdio_dev) {
+		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+		return -ENODEV;
+	}
+
+	/* Now bind the SDIO interface to the MMC/SD driver */
+
+	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
+
+	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
+
+	if (ret != OK) {
+		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+		return ret;
+	}
+
+	finfo("Successfully bound SDIO to the MMC/SD driver\n");
+
+#ifdef HAVE_NCD
+	/* Use SD card detect pin to check if a card is g_sd_inserted */
+
+	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
+	finfo("Card detect : %d\n", cd_status);
+
+	sdio_mediachange(sdio_dev, cd_status);
+#else
+	/* Assume that the SD card is inserted.  What choice do we have? */
+
+	sdio_mediachange(sdio_dev, true);
+#endif
+
+	return OK;
+}
+
+#endif /* CONFIG_MMCSD */
diff --git a/boards/cuav/x25-super/src/spi.cpp b/boards/cuav/x25-super/src/spi.cpp
new file mode 100644
index 0000000000..ac6a278f0e
--- /dev/null
+++ b/boards/cuav/x25-super/src/spi.cpp
@@ -0,0 +1,58 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2020, 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI1, {
+		initSPIDevice(DRV_IMU_DEVTYPE_SCH16T, SPI::CS{GPIO::PortJ, GPIO::Pin11}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+	}, {GPIO::PortF, GPIO::Pin4}),
+	initSPIBus(SPI::Bus::SPI2, {
+		initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortG, GPIO::Pin3}),
+	}, {GPIO::PortI, GPIO::Pin4}),
+	initSPIBus(SPI::Bus::SPI4, {
+		initSPIDevice(DRV_MAG_DEVTYPE_RM3100, SPI::CS{GPIO::PortH, GPIO::Pin15}, SPI::DRDY{GPIO::PortG, GPIO::Pin1}),
+		initSPIDevice(DRV_BARO_DEVTYPE_BMP581, SPI::CS{GPIO::PortJ, GPIO::Pin6}, SPI::DRDY{GPIO::PortJ, GPIO::Pin0}),
+	}, {GPIO::PortJ, GPIO::Pin4}),
+	initSPIBus(SPI::Bus::SPI5, {
+		initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortJ, GPIO::Pin12}, SPI::DRDY{GPIO::PortG, GPIO::Pin6}),
+		initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7}),
+	}, {GPIO::PortI, GPIO::Pin11}),
+	initSPIBusExternal(SPI::Bus::SPI6, {
+		initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);
diff --git a/boards/cuav/x25-super/src/timer_config.cpp b/boards/cuav/x25-super/src/timer_config.cpp
new file mode 100644
index 0000000000..aa9e2c073e
--- /dev/null
+++ b/boards/cuav/x25-super/src/timer_config.cpp
@@ -0,0 +1,90 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+/* Timer allocation
+ *
+ * TIM5_CH4  T FMU_CH1  PI0
+ * TIM5_CH3  T FMU_CH2  PH12
+ * TIM5_CH2  T FMU_CH3  PH11
+ * TIM5_CH1  T FMU_CH4  PH10
+ * TIM4_CH2  T FMU_CH5  PD13
+ * TIM4_CH3  T FMU_CH6  PD14
+ * TIM4_CH1  T FMU_CH7  PD12
+ * TIM4_CH4  T FMU_CH8  PD15
+ *
+ *
+ * TIM1_CH2  T FMU_CAP1           < Capture  PE11
+ * TIM1_CH1  T FMU_CAP2           < Capture  PE9
+ * TIM1_CH3  T FMU_CAP3           < Capture  PJ9
+ * TIM8_CH2  T FMU_CAP4           < Capture  PI6
+ * TIM8_CH3  T FMU_CAP5           < Capture  PI7
+ * TIM8_CH1  T FMU_CAP6           < Capture  PI5
+ * TIM12_CH1  T FMU_CAP7          < Capture  PH6
+ * TIM12_CH2  T FMU_CAP8          < Capture  PH9
+ *
+ *
+ * TIM14_CH1  T BUZZER_1              - Driven by other driver
+ * TIM8_CH1_IN  T FMU_PPM_INPUT       - Sampled byt HRT by other driver
+ */
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer1),
+	initIOTimer(Timer::Timer8),
+	initIOTimer(Timer::Timer12),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel4}, {GPIO::PortI, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel3}, {GPIO::PortH, GPIO::Pin12}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel2}, {GPIO::PortH, GPIO::Pin11}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortH, GPIO::Pin10}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel1}, {GPIO::PortD, GPIO::Pin12}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel4}, {GPIO::PortD, GPIO::Pin15}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortJ, GPIO::Pin9}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer8, Timer::Channel2}, {GPIO::PortI, GPIO::Pin6}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer8, Timer::Channel3}, {GPIO::PortI, GPIO::Pin7}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer8, Timer::Channel1}, {GPIO::PortI, GPIO::Pin5}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer12, Timer::Channel1}, {GPIO::PortH, GPIO::Pin6}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer12, Timer::Channel2}, {GPIO::PortH, GPIO::Pin9}),
+};
+
+constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+	initIOTimerChannelMapping(io_timers, timer_io_channels);
diff --git a/boards/cuav/x25-super/src/usb.c b/boards/cuav/x25-super/src/usb.c
new file mode 100644
index 0000000000..0a6e88c6b9
--- /dev/null
+++ b/boards/cuav/x25-super/src/usb.c
@@ -0,0 +1,105 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include <arm_internal.h>
+#include <chip.h>
+#include <stm32_gpio.h>
+#include <stm32_otg.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the PX4FMU board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32H7_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	uinfo("resume: %d\n", resume);
+}
diff --git a/docs/assets/flight_controller/cuav_x25-super/x25-super.png b/docs/assets/flight_controller/cuav_x25-super/x25-super.png
new file mode 100644
index 0000000000..70d518cdb1
Binary files /dev/null and b/docs/assets/flight_controller/cuav_x25-super/x25-super.png differ
diff --git a/docs/assets/flight_controller/cuav_x25-super/x25-super_pinouts_01.png b/docs/assets/flight_controller/cuav_x25-super/x25-super_pinouts_01.png
new file mode 100644
index 0000000000..8f2df218bb
Binary files /dev/null and b/docs/assets/flight_controller/cuav_x25-super/x25-super_pinouts_01.png differ
diff --git a/docs/assets/flight_controller/cuav_x25-super/x25-super_pinouts_02.png b/docs/assets/flight_controller/cuav_x25-super/x25-super_pinouts_02.png
new file mode 100644
index 0000000000..2c0f2eed59
Binary files /dev/null and b/docs/assets/flight_controller/cuav_x25-super/x25-super_pinouts_02.png differ
diff --git a/docs/assets/flight_controller/cuav_x25-super/x25-super_size.png b/docs/assets/flight_controller/cuav_x25-super/x25-super_size.png
new file mode 100644
index 0000000000..05b2d10bc9
Binary files /dev/null and b/docs/assets/flight_controller/cuav_x25-super/x25-super_size.png differ
diff --git a/docs/en/SUMMARY.md b/docs/en/SUMMARY.md
index aaca3ffd3e..1306bcb72c 100644
--- a/docs/en/SUMMARY.md
+++ b/docs/en/SUMMARY.md
@@ -174,6 +174,7 @@
       - [CUAV V5 nano (FMUv5)](flight_controller/cuav_v5_nano.md)
         - [CUAV V5 nano Wiring Quickstart](assembly/quick_start_cuav_v5_nano.md)
       - [CUAV X25 EVO](flight_controller/cuav_x25-evo.md)
+      - [CUAV X25 SUPER](flight_controller/cuav_x25-super.md)
       - [CubePilot Cube Orange+ (CubePilot)](flight_controller/cubepilot_cube_orangeplus.md)
       - [CubePilot Cube Orange (CubePilot)](flight_controller/cubepilot_cube_orange.md)
       - [CubePilot Cube Yellow (CubePilot)](flight_controller/cubepilot_cube_yellow.md)
diff --git a/docs/en/flight_controller/autopilot_manufacturer_supported.md b/docs/en/flight_controller/autopilot_manufacturer_supported.md
index ea2e465295..4c33358f9f 100644
--- a/docs/en/flight_controller/autopilot_manufacturer_supported.md
+++ b/docs/en/flight_controller/autopilot_manufacturer_supported.md
@@ -22,6 +22,7 @@ The boards in this category are:
 - [CUAV V5+](../flight_controller/cuav_v5_plus.md) (FMUv5)
 - [CUAV V5 nano](../flight_controller/cuav_v5_nano.md) (FMUv5)
 - [CUAV X25 EVO](../flight_controller/cuav_x25-evo.md)
+  [CUAV X25 SUPER](../flight_controller/cuav_x25-super.md)
 - [CubePilot Cube Orange+](../flight_controller/cubepilot_cube_orangeplus.md)
 - [CubePilot Cube Orange](../flight_controller/cubepilot_cube_orange.md)
 - [CubePilot Cube Yellow](../flight_controller/cubepilot_cube_yellow.md)
diff --git a/docs/en/flight_controller/cuav_x25-super.md b/docs/en/flight_controller/cuav_x25-super.md
new file mode 100644
index 0000000000..1c57baf08e
--- /dev/null
+++ b/docs/en/flight_controller/cuav_x25-super.md
@@ -0,0 +1,172 @@
+# CUAV X25-SUPER
+
+<Badge type="tip" text="PX4 v1.18)" />
+
+::: warning
+PX4 does not manufacture this (or any) autopilot.
+Contact the [manufacturer](https://store.cuav.net/) for hardware support or compliance issues.
+:::
+
+The _X25-SUPER_ is an advanced autopilot manufactured by CUAV<sup>&reg;</sup>.
+
+The autopilot is recommended for commercial system integration but is also suitable for academic research and any other applications.
+
+![X25-SUPER AutoPilot - hero image](../../assets/flight_controller/cuav_x25-super/x25-super.png)
+
+The X25-SUPER brings you ultimate performance, stability, and reliability in every aspect.
+
+::: info
+These flight controllers are [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
+:::
+
+### Features
+
+- Arm® Cortex-M7® processor (STM32H743XI) with Floating-Point Unit (FPU), operating at 480MHz, and featuring 2MB Flash memory. Enables developers to enhance productivity and efficiency, allowing for more complex algorithms and models.
+- Automotive-grade RM3100 compass. Designed for better stability and anti-interference capability.
+- Triple-redundant IMUs and dual-redundant barometers located on separate buses. If the PX4 autopilot detects a sensor failure, the system seamlessly switches to another sensor to maintain flight control reliability.
+- Independent LDO power control supplies power to each sensor group. A vibration isolation system filters high-frequency vibrations and reduces noise to ensure accurate readings, enabling better overall flight performance for the vehicle.
+- Integrated Microchip Ethernet PHY for high-speed communication with onboard devices like mission computers via Ethernet.
+- Dual temperature compensation systems, located on the IMU board and FMU board respectively. Temperature is controlled by onboard heating resistors to achieve the optimal operating temperature for the IMUs.
+- PWM servo output voltage switchable between 3.3V or 5V.
+- Modular design for DIY carrier boards.
+
+### Processors & Sensors
+
+- Main Processor: STM32H743XI
+  - 32-bit Arm® Cortex®-M7, 480MHz, 2MB Flash, 1MB RAM
+- Onboard Sensors:
+  - Accel/Gyro: SCH16T
+  - Accel/Gyro: IIM42652
+  - Accel/Gyro: IIM42653
+  - Magnetometer: RM3100
+  - Barometer: BMP581
+  - Barometer: ICP-20100
+
+### Electrical Data
+
+- Rated Voltage:
+  - Input Voltage: 10~18V
+  - USB Power Input: 4.75~5.25V
+  - Servo Rail Input: 0~9.9V
+- Rated Current:
+  - Total Output Max Current: 10A
+  - TELEM1 and TELEM2 Output Current limiter: 4A
+  - CAN1 and CAN2 Output Current limiter: 2.4A
+  - Other Ports Output Current limiter: 1.5A
+
+### Interfaces
+
+- 16x PWM Servo Outputs
+- 1x Dedicated R/C Input for Spektrum / DSM and S.Bus
+- 1x Analog/PWM RSSI Input
+- 2x TELEM Ports (with full flow control)
+- 1x UART4 Port
+- 2x GPS Ports
+  - 1x Full GPS plus Safety Switch Port (GPS1)
+  - 1x Basic GPS Port (with I2C, GPS2)
+- 1x USB Port (TYPE-C)
+- 1x Ethernet Port
+  - Transformerless application
+  - 100Mbps
+- 3x I2C Bus Ports
+- 1x SPI Bus
+  - 1x Chip Select Line
+  - 1x Data Ready Line
+  - 1x SPI Reset Line
+- 5x CAN Ports for CAN Peripherals
+  - 3x CAN1 Bus Multiplexed Ports
+  - 2x CAN2 Bus Multiplexed Ports
+- 2x Power Input Ports
+  - DroneCAN/UAVCAN Power Input
+- 2x AD Ports
+  - Analog Input (3.3V)
+  - Analog Input (6.6V - not supported)
+- 1x Dedicated Debug Port
+  - FMU Debug
+
+### Mechanical Data
+
+- Size
+  - Flight controller
+
+    ![CUAV X25-SUPER](../../assets/flight_controller/cuav_x25-super/x25-super_size.png)
+
+## Purchase Channels {#store}
+
+Order from [CUAV](https://store.cuav.net/).
+
+## Assembly/Setup
+
+- Not provided.
+
+## Pinouts
+
+![CUAV X25-SUPER Pinout_01](../../assets/flight_controller/cuav_x25-super/x25-super_pinouts_01.png)
+![CUAV X25-SUPER Pinout_02](../../assets/flight_controller/cuav_x25-super/x25-super_pinouts_02.png)
+
+## Serial Port Mapping
+
+| UART   | Device     | Port          |
+| ------ | ---------- | ------------- |
+| USART1 | /dev/ttyS0 | GPS1          |
+| USART2 | /dev/ttyS1 | GPS2          |
+| USART3 | /dev/ttyS2 | Debug Console |
+| UART4  | /dev/ttyS3 | UART4         |
+| UART5  | /dev/ttyS4 | TELEM2        |
+| USART6 | /dev/ttyS5 | RC            |
+| UART7  | /dev/ttyS6 | TELEM1        |
+
+## RC Input
+
+The RC input pin is directly connected to the FMU UART6 TX.
+
+## Voltage Ratings
+
+The _X25-SUPER_ achieves triple redundancy on power supplies if three power sources are provided. The three power rails are POWERC1, POWERC2, and USB.
+
+- **POWER C1** and **POWER C2** are DroneCAN/UAVCAN battery interfaces.
+
+**Normal Operation Maximum Ratings**
+
+Under these conditions, all power sources will be used to power the system in the following order:
+
+1. **POWER C1** and **POWER C2** Inputs (10V to 18V)
+2. USB Input (4.75V to 5.25V)
+
+**Voltage monitoring**
+
+Digital DroneCAN/UAVCAN battery monitoring is enabled by default.
+
+## Building Firmware
+
+::: tip
+Most users will not need to build this firmware from PX4 v1.18.
+It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
+:::
+
+To [build PX4](../dev_setup/building_px4.md) for this target, execute:
+
+```
+make cuav_x25-super_default
+```
+
+## Debug Port {#debug_port}
+
+The [PX4 System Console](../debug/system_console.md) and [SWD Interface](../debug/swd_debug.md) operate on the **FMU Debug** port.
+
+| Pin     | Signal         | Volt  |
+| ------- | -------------- | ----- |
+| 1 (red) | 5V+            | +5V   |
+| 2 (blk) | DEBUG TX (OUT) | +3.3V |
+| 3 (blk) | DEBUG RX (IN)  | +3.3V |
+| 4 (blk) | FMU_SWDIO      | +3.3V |
+| 5 (blk) | FMU_SWCLK      | +3.3V |
+| 6 (blk) | GND            | GND   |
+
+## Supported Platforms / Airframes
+Any multicopter / airplane / rover or boat that can be controlled with normal RC servos or Futaba S-Bus servos.
+The complete set of supported configurations can be seen in the [Airframes Reference](../airframes/airframe_reference.md).
+
+## Further info
+
+- [CUAV Docs](https://doc.cuav.net/)