ODrive/Firmware/MotorControl/endstop.cpp

#include <odrive_main.h>

Endstop::Endstop(Endstop::Config_t &config)
    : config_(config) {
        set_endstop_enabled(config_.enabled);
}

void Endstop::update() {
    uint16_t gpio_pin = get_gpio_pin_by_pin(config_.gpio_num);
    GPIO_TypeDef* gpio_port = get_gpio_port_by_pin(config_.gpio_num);
    auto last_pin_state = pin_state_;
    pin_state_ = HAL_GPIO_ReadPin(gpio_port, gpio_pin);
    if(pin_state_ != last_pin_state){
        debounce_timer_ = axis_->loop_counter_ * current_meas_period;
    }
    if (config_.enabled) {
        float now = axis_->loop_counter_ * current_meas_period;
        if ((now - debounce_timer_) >= (config_.debounce_ms * 0.001f)) {            // Debounce timer expired, take the new pin state
            endstop_state_ = config_.is_active_high ? pin_state_ : !pin_state_;     // endstop_state is the logical state
            debounce_timer_ = now - (config_.debounce_ms * 0.001f);                 // Ensure timer doesn't have overflow issues
        } else {
            endstop_state_ = endstop_state_;  // Do nothing
        }
    } else {
        endstop_state_ = false;
    }
}

bool Endstop::getEndstopState() {
    return endstop_state_;
}

void Endstop::set_endstop_enabled(bool enable){
    uint16_t gpio_pin = get_gpio_pin_by_pin(config_.gpio_num);
    GPIO_TypeDef* gpio_port = get_gpio_port_by_pin(config_.gpio_num);
    if(enable){
        HAL_GPIO_DeInit(gpio_port, gpio_pin);
        GPIO_InitTypeDef GPIO_InitStruct;
        GPIO_InitStruct.Pin = gpio_pin;
        GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
        GPIO_InitStruct.Pull = config_.is_active_high ? GPIO_PULLDOWN : GPIO_PULLUP;;
        HAL_GPIO_Init(gpio_port, &GPIO_InitStruct);
    }
}