diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h
new file mode 100644
index 00000000..74f62fcf
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h
@@ -0,0 +1,343 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.5.2
+ * @date 22-September-2016
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00U,
+ HAL_PCD_STATE_READY = 0x01U,
+ HAL_PCD_STATE_ERROR = 0x02U,
+ HAL_PCD_STATE_BUSY = 0x03U,
+ HAL_PCD_STATE_TIMEOUT = 0x04U
+} PCD_StateTypeDef;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+/* Device LPM suspend state */
+typedef enum
+{
+ LPM_L0 = 0x00U, /* on */
+ LPM_L1 = 0x01U, /* LPM L1 sleep */
+ LPM_L2 = 0x02U, /* suspend */
+ LPM_L3 = 0x03U /* off */
+}PCD_LPM_StateTypeDef;
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
+ uint32_t BESL;
+ uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+#ifdef USB_OTG_GCCFG_BCDEN
+ uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GCCFG_BCDEN */
+ void *pData; /*!< Pointer to upper stack Handler */
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed PCD Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0U
+#define PCD_SPEED_HIGH_IN_FULL 1U
+#define PCD_SPEED_FULL 2U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1U
+#define PCD_PHY_EMBEDDED 2U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+ * @{
+ */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE 9U
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE 5U
+#endif /* USBD_FS_TRDT_VALUE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10U)
+
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08U)
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0CU)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10U)
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08U)
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0CU)
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10U)
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE ((uint32_t)0x00100000U) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000U) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h
new file mode 100644
index 00000000..9cc9131d
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h
@@ -0,0 +1,133 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.5.2
+ * @date 22-September-2016
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+typedef enum
+{
+ PCD_LPM_L0_ACTIVE = 0x00U, /* on */
+ PCD_LPM_L1_ACTIVE = 0x01U /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+typedef enum
+{
+ PCD_BCD_ERROR = 0xFFU,
+ PCD_BCD_CONTACT_DETECTION = 0xFEU,
+ PCD_BCD_STD_DOWNSTREAM_PORT = 0xFDU,
+ PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFCU,
+ PCD_BCD_DEDICATED_CHARGING_PORT = 0xFBU,
+ PCD_BCD_DISCOVERY_COMPLETED = 0x00U
+}PCD_BCD_MsgTypeDef;
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+void HAL_PCDEx_ADP_Sensing_Start(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_ADP_Sensing_Callback(PCD_HandleTypeDef *hpcd);
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h
new file mode 100644
index 00000000..15dc5c9a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h
@@ -0,0 +1,477 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.h
+ * @author MCD Application Team
+ * @version V1.5.2
+ * @date 22-September-2016
+ * @brief Header file of USB Core HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup USB_Core
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+typedef enum
+{
+ USB_OTG_DEVICE_MODE = 0U,
+ USB_OTG_HOST_MODE = 1U,
+ USB_OTG_DRD_MODE = 2U
+
+}USB_OTG_ModeTypeDef;
+
+/**
+ * @brief URB States definition
+ */
+typedef enum {
+ URB_IDLE = 0U,
+ URB_DONE,
+ URB_NOTREADY,
+ URB_NYET,
+ URB_ERROR,
+ URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+ * @brief Host channel States definition
+ */
+typedef enum {
+ HC_IDLE = 0U,
+ HC_XFRC,
+ HC_HALTED,
+ HC_NAK,
+ HC_NYET,
+ HC_STALL,
+ HC_XACTERR,
+ HC_BBLERR,
+ HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t Host_channels; /*!< Host Channels number.
+ This parameter Depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
+
+ uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
+
+ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
+
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
+}USB_OTG_CfgTypeDef;
+
+/**
+ * @brief OTG End Point Initialization Structure definition
+ */
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t even_odd_frame; /*!< IFrame parity
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t tx_fifo_num; /*!< Transmission FIFO number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}USB_OTG_EPTypeDef;
+
+/**
+ * @brief OTG HC Initialization Structure definition
+ */
+typedef struct
+{
+ uint8_t dev_addr ; /*!< USB device address.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+
+ uint8_t ch_num; /*!< Host channel number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_num; /*!< Endpoint number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t speed; /*!< USB Host speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
+
+ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
+
+ uint8_t ep_type; /*!< Endpoint Type.
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint16_t max_packet; /*!< Endpoint Max packet size.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t data_pid; /*!< Initial data PID.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+
+ uint32_t xfer_len; /*!< Current transfer length. */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
+
+ uint8_t toggle_in; /*!< IN transfer current toggle flag.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t toggle_out; /*!< OUT transfer current toggle flag
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
+
+ uint32_t ErrCnt; /*!< Host channel error count.*/
+
+ USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+ USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+ * @{
+ */
+#define USB_OTG_MODE_DEVICE 0U
+#define USB_OTG_MODE_HOST 1U
+#define USB_OTG_MODE_DRD 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Speed_ USB Core Speed
+ * @{
+ */
+#define USB_OTG_SPEED_HIGH 0U
+#define USB_OTG_SPEED_HIGH_IN_FULL 1U
+#define USB_OTG_SPEED_LOW 2U
+#define USB_OTG_SPEED_FULL 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY_ USB Core PHY
+ * @{
+ */
+#define USB_OTG_ULPI_PHY 1U
+#define USB_OTG_EMBEDDED_PHY 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_MPS_ USB Core MPS
+ * @{
+ */
+#define USB_OTG_HS_MAX_PACKET_SIZE 512U
+#define USB_OTG_FS_MAX_PACKET_SIZE 64U
+#define USB_OTG_MAX_EP0_SIZE 64U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency
+ * @{
+ */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1U)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1U)
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval
+ * @{
+ */
+#define DCFG_FRAME_INTERVAL_80 0U
+#define DCFG_FRAME_INTERVAL_85 1U
+#define DCFG_FRAME_INTERVAL_90 2U
+#define DCFG_FRAME_INTERVAL_95 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS_ USB EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0U
+#define DEP0CTL_MPS_32 1U
+#define DEP0CTL_MPS_16 2U
+#define DEP0CTL_MPS_8 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Speed_ USB EP Speed
+ * @{
+ */
+#define EP_SPEED_LOW 0U
+#define EP_SPEED_FULL 1U
+#define EP_SPEED_HIGH 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type_ USB EP Type
+ * @{
+ */
+#define EP_TYPE_CTRL 0U
+#define EP_TYPE_ISOC 1U
+#define EP_TYPE_BULK 2U
+#define EP_TYPE_INTR 3U
+#define EP_TYPE_MSK 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_STS_Defines_ USB STS Defines
+ * @{
+ */
+#define STS_GOUT_NAK 1U
+#define STS_DATA_UPDT 2U
+#define STS_XFER_COMP 3U
+#define STS_SETUP_COMP 4U
+#define STS_SETUP_UPDT 6U
+/**
+ * @}
+ */
+
+/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines
+ * @{
+ */
+#define HCFG_30_60_MHZ 0U
+#define HCFG_48_MHZ 1U
+#define HCFG_6_MHZ 2U
+/**
+ * @}
+ */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines
+ * @{
+ */
+#define HPRT0_PRTSPD_HIGH_SPEED 0U
+#define HPRT0_PRTSPD_FULL_SPEED 1U
+#define HPRT0_PRTSPD_LOW_SPEED 2U
+/**
+ * @}
+ */
+
+#define HCCHAR_CTRL 0U
+#define HCCHAR_ISOC 1U
+#define HCCHAR_BULK 2U
+#define HCCHAR_INTR 3U
+
+#define HC_PID_DATA0 0U
+#define HC_PID_DATA2 1U
+#define HC_PID_DATA1 2U
+#define HC_PID_SETUP 3U
+
+#define GRXSTS_PKTSTS_IN 2
+#define GRXSTS_PKTSTS_IN_XFER_COMP 3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
+#define GRXSTS_PKTSTS_CH_HALTED 7
+
+#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
new file mode 100644
index 00000000..b867ff92
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
@@ -0,0 +1,1332 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.c
+ * @author MCD Application Team
+ * @version V1.5.2
+ * @date 22-September-2016
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The PCD HAL driver can be used as follows:
+
+ (#) Declare a PCD_HandleTypeDef handle structure, for example:
+ PCD_HandleTypeDef hpcd;
+
+ (#) Fill parameters of Init structure in HCD handle
+
+ (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...)
+
+ (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+ (##) Enable the PCD/USB Low Level interface clock using
+ (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+ (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure PCD pin-out
+ (##) Configure PCD NVIC interrupt
+
+ (#)Associate the Upper USB device stack to the HAL PCD Driver:
+ (##) hpcd.pData = pdev;
+
+ (#)Enable PCD transmission and reception:
+ (##) HAL_PCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCD PCD
+ * @brief PCD HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b))
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the PCD according to the specified
+ * parameters in the PCD_InitTypeDef and initialize the associated handle.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{
+ uint32_t i = 0U;
+
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_PCD_MspInit(hpcd);
+
+ /* Disable the Interrupts */
+ __HAL_PCD_DISABLE(hpcd);
+
+ /*Init the Core (common init.) */
+ USB_CoreInit(hpcd->Instance, hpcd->Init);
+
+ /* Force Device Mode*/
+ USB_SetCurrentMode(hpcd->Instance , USB_OTG_DEVICE_MODE);
+
+ /* Init endpoints structures */
+ for (i = 0U; i < 15U; i++)
+ {
+ /* Init ep structure */
+ hpcd->IN_ep[i].is_in = 1U;
+ hpcd->IN_ep[i].num = i;
+ hpcd->IN_ep[i].tx_fifo_num = i;
+ /* Control until ep is activated */
+ hpcd->IN_ep[i].type = EP_TYPE_CTRL;
+ hpcd->IN_ep[i].maxpacket = 0U;
+ hpcd->IN_ep[i].xfer_buff = 0U;
+ hpcd->IN_ep[i].xfer_len = 0U;
+ }
+
+ for (i = 0U; i < 15U; i++)
+ {
+ hpcd->OUT_ep[i].is_in = 0U;
+ hpcd->OUT_ep[i].num = i;
+ hpcd->IN_ep[i].tx_fifo_num = i;
+ /* Control until ep is activated */
+ hpcd->OUT_ep[i].type = EP_TYPE_CTRL;
+ hpcd->OUT_ep[i].maxpacket = 0U;
+ hpcd->OUT_ep[i].xfer_buff = 0U;
+ hpcd->OUT_ep[i].xfer_len = 0U;
+
+ hpcd->Instance->DIEPTXF[i] = 0U;
+ }
+
+ /* Init Device */
+ USB_DevInit(hpcd->Instance, hpcd->Init);
+
+ hpcd->State= HAL_PCD_STATE_READY;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Activate LPM */
+ if (hpcd->Init.lpm_enable == 1U)
+ {
+ HAL_PCDEx_ActivateLPM(hpcd);
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+#ifdef USB_OTG_GCCFG_BCDEN
+ /* Activate Battery charging */
+ if (hpcd->Init.battery_charging_enable == 1U)
+ {
+ HAL_PCDEx_ActivateBCD(hpcd);
+ }
+#endif /* USB_OTG_GCCFG_BCDEN */
+
+ USB_DevDisconnect (hpcd->Instance);
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the PCD peripheral.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Stop Device */
+ HAL_PCD_Stop(hpcd);
+
+ /* DeInit the low level hardware */
+ HAL_PCD_MspDeInit(hpcd);
+
+ hpcd->State = HAL_PCD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevConnect (hpcd->Instance);
+ __HAL_PCD_ENABLE(hpcd);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ __HAL_PCD_DISABLE(hpcd);
+ USB_StopDevice(hpcd->Instance);
+ USB_DevDisconnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles PCD interrupt request.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ uint32_t i = 0U, ep_intr = 0U, epint = 0U, epnum = 0U;
+ uint32_t fifoemptymsk = 0U, temp = 0U;
+ USB_OTG_EPTypeDef *ep;
+ uint32_t hclk = 180000000;
+
+ /* ensure that we are in device mode */
+ if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
+ {
+ /* avoid spurious interrupt */
+ if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd))
+ {
+ return;
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
+ {
+ epnum = 0U;
+
+ /* Read in the device interrupt bits */
+ ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
+
+ while ( ep_intr )
+ {
+ if (ep_intr & 0x1U)
+ {
+ epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
+
+ if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
+
+ if(hpcd->Init.dma_enable == 1U)
+ {
+ hpcd->OUT_ep[epnum].xfer_count = hpcd->OUT_ep[epnum].maxpacket- (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ);
+ hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;
+ }
+
+ HAL_PCD_DataOutStageCallback(hpcd, epnum);
+ if(hpcd->Init.dma_enable == 1U)
+ {
+ if((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U))
+ {
+ /* this is ZLP, so prepare EP0 for next setup */
+ USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
+ }
+ }
+ }
+
+ if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
+ {
+ /* Inform the upper layer that a setup packet is available */
+ HAL_PCD_SetupStageCallback(hpcd);
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
+ }
+
+ if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
+ }
+
+#ifdef USB_OTG_DOEPINT_OTEPSPR
+ /* Clear Status Phase Received interrupt */
+ if(( epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR);
+ }
+#endif /* USB_OTG_DOEPINT_OTEPSPR */
+ }
+ epnum++;
+ ep_intr >>= 1U;
+ }
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
+ {
+ /* Read in the device interrupt bits */
+ ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
+
+ epnum = 0U;
+
+ while ( ep_intr )
+ {
+ if (ep_intr & 0x1U) /* In ITR */
+ {
+ epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
+
+ if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
+ {
+ fifoemptymsk = 0x1U << epnum;
+ USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket;
+ }
+
+ HAL_PCD_DataInStageCallback(hpcd, epnum);
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ /* this is ZLP, so prepare EP0 for next setup */
+ if((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U))
+ {
+ /* prepare to rx more setup packets */
+ USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
+ }
+ }
+ }
+ if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
+ }
+ if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
+ }
+ if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
+ }
+ if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
+ }
+ if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
+ {
+ PCD_WriteEmptyTxFifo(hpcd , epnum);
+ }
+ }
+ epnum++;
+ ep_intr >>= 1U;
+ }
+ }
+
+ /* Handle Resume Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
+ {
+ /* Clear the Remote Wake-up Signaling */
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ if(hpcd->LPM_State == LPM_L1)
+ {
+ hpcd->LPM_State = LPM_L0;
+ HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE);
+ }
+ else
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+ {
+ HAL_PCD_ResumeCallback(hpcd);
+ }
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
+ }
+
+ /* Handle Suspend Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
+ {
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
+ }
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Handle LPM Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT);
+ if( hpcd->LPM_State == LPM_L0)
+ {
+ hpcd->LPM_State = LPM_L1;
+ hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >>2 ;
+ HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE);
+ }
+ else
+ {
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+ /* Handle Reset Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
+ {
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+ USB_FlushTxFifo(hpcd->Instance , 0U);
+
+ for (i = 0U; i < hpcd->Init.dev_endpoints; i++)
+ {
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+ USBx_DEVICE->DAINTMSK |= 0x10001U;
+
+ if(hpcd->Init.use_dedicated_ep1)
+ {
+ USBx_DEVICE->DOUTEP1MSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+ USBx_DEVICE->DINEP1MSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+ }
+ else
+ {
+#ifdef USB_OTG_DOEPINT_OTEPSPR
+ USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM | USB_OTG_DOEPMSK_OTEPSPRM);
+#else
+ USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+#endif /* USB_OTG_DOEPINT_OTEPSPR */
+ USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+ }
+
+ /* Set Default Address to 0 */
+ USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
+
+ /* setup EP0 to receive SETUP packets */
+ USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
+ }
+
+ /* Handle Enumeration done Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
+ {
+ USB_ActivateSetup(hpcd->Instance);
+ hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
+
+ if ( USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
+ {
+ hpcd->Init.speed = USB_OTG_SPEED_HIGH;
+ hpcd->Init.ep0_mps = USB_OTG_HS_MAX_PACKET_SIZE ;
+ hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_HS_TRDT_VALUE << 10U) & USB_OTG_GUSBCFG_TRDT);
+ }
+ else
+ {
+ hpcd->Init.speed = USB_OTG_SPEED_FULL;
+ hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ;
+
+ /* The USBTRD is configured according to the tables below, depending on AHB frequency
+ used by application. In the low AHB frequency range it is used to stretch enough the USB response
+ time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access
+ latency to the Data FIFO */
+
+ /* Get hclk frequency value */
+ hclk = HAL_RCC_GetHCLKFreq();
+
+ if((hclk >= 14200000)&&(hclk < 15000000))
+ {
+ /* hclk Clock Range between 14.2-15 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xF << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 15000000)&&(hclk < 16000000))
+ {
+ /* hclk Clock Range between 15-16 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xE << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 16000000)&&(hclk < 17200000))
+ {
+ /* hclk Clock Range between 16-17.2 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xD << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 17200000)&&(hclk < 18500000))
+ {
+ /* hclk Clock Range between 17.2-18.5 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xC << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 18500000)&&(hclk < 20000000))
+ {
+ /* hclk Clock Range between 18.5-20 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xB << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 20000000)&&(hclk < 21800000))
+ {
+ /* hclk Clock Range between 20-21.8 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xA << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 21800000)&&(hclk < 24000000))
+ {
+ /* hclk Clock Range between 21.8-24 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x9 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 24000000)&&(hclk < 27700000))
+ {
+ /* hclk Clock Range between 24-27.7 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x8 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 27700000)&&(hclk < 32000000))
+ {
+ /* hclk Clock Range between 27.7-32 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x7 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else /* if(hclk >= 32000000) */
+ {
+ /* hclk Clock Range between 32-180 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x6 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+ }
+
+ HAL_PCD_ResetCallback(hpcd);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
+ }
+
+ /* Handle RxQLevel Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
+ {
+ USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ temp = USBx->GRXSTSP;
+
+ ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
+
+ if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U) == STS_DATA_UPDT)
+ {
+ if((temp & USB_OTG_GRXSTSP_BCNT) != 0U)
+ {
+ USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4U);
+ ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ }
+ }
+ else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U) == STS_SETUP_UPDT)
+ {
+ USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U);
+ ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ }
+ USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+
+ /* Handle SOF Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
+ {
+ HAL_PCD_SOFCallback(hpcd);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
+ }
+
+ /* Handle Incomplete ISO IN Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
+ {
+ HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
+ }
+
+ /* Handle Incomplete ISO OUT Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+ {
+ HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+ }
+
+ /* Handle Connection event Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
+ {
+ HAL_PCD_ConnectCallback(hpcd);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
+ }
+
+ /* Handle Disconnection event Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
+ {
+ temp = hpcd->Instance->GOTGINT;
+
+ if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
+ {
+ HAL_PCD_DisconnectCallback(hpcd);
+ }
+ hpcd->Instance->GOTGINT |= temp;
+ }
+ }
+}
+
+/**
+ * @brief Data OUT stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataOutStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Data IN stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataInStageCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Setup stage callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SetupStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Start Of Frame callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SOFCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResetCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Suspend event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SuspendCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Resume event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResumeCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO OUT callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO IN callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ConnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DisconnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Connect the USB device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevConnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Disconnect the USB device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevDisconnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the USB Device address.
+ * @param hpcd: PCD handle
+ * @param address: new device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+ __HAL_LOCK(hpcd);
+ USB_SetDevAddress(hpcd->Instance, address);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @brief Open and configure an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param ep_mps: endpoint max packet size
+ * @param ep_type: endpoint type
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+ HAL_StatusTypeDef ret = HAL_OK;
+ USB_OTG_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+ ep->maxpacket = ep_mps;
+ ep->type = ep_type;
+ if (ep->is_in)
+ {
+ /* Assign a Tx FIFO */
+ ep->tx_fifo_num = ep->num;
+ }
+ /* Set initial data PID. */
+ if (ep_type == EP_TYPE_BULK )
+ {
+ ep->data_pid_start = 0U;
+ }
+
+ __HAL_LOCK(hpcd);
+ USB_ActivateEndpoint(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+ return ret;
+}
+
+
+/**
+ * @brief Deactivate an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+
+ __HAL_LOCK(hpcd);
+ USB_DeactivateEndpoint(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the reception buffer
+ * @param len: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 0U;
+ ep->num = ep_addr & 0x7FU;
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ ep->dma_addr = (uint32_t)pBuf;
+ }
+
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ else
+ {
+ USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get Received Data Size.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval Data Size
+ */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return hpcd->OUT_ep[ep_addr & 0x7FU].xfer_count;
+}
+/**
+ * @brief Send an amount of data.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the transmission buffer
+ * @param len: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 1U;
+ ep->num = ep_addr & 0x7FU;
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ ep->dma_addr = (uint32_t)pBuf;
+ }
+
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ else
+ {
+ USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set a STALL condition over an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 1U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+
+ __HAL_LOCK(hpcd);
+ USB_EPSetStall(hpcd->Instance , ep);
+ if((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Clear a STALL condition over in an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 0U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+ __HAL_LOCK(hpcd);
+ USB_EPClearStall(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Flush an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7FU);
+ }
+ else
+ {
+ USB_FlushRxFifo(hpcd->Instance);
+ }
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate remote wakeup signalling.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+ /* Activate Remote wakeup signaling */
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate remote wakeup signalling.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ /* De-activate Remote wakeup signaling */
+ USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the PCD handle state.
+ * @param hpcd: PCD handle
+ * @retval HAL state
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+ return hpcd->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup PCD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Check FIFO for the next packet to be loaded.
+ * @param hpcd: PCD handle
+ * @param epnum : endpoint number
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ USB_OTG_EPTypeDef *ep;
+ int32_t len = 0U;
+ uint32_t len32b;
+ uint32_t fifoemptymsk = 0U;
+
+ ep = &hpcd->IN_ep[epnum];
+ len = ep->xfer_len - ep->xfer_count;
+
+ if (len > ep->maxpacket)
+ {
+ len = ep->maxpacket;
+ }
+
+
+ len32b = (len + 3U) / 4U;
+
+ while ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
+ ep->xfer_count < ep->xfer_len &&
+ ep->xfer_len != 0U)
+ {
+ /* Write the FIFO */
+ len = ep->xfer_len - ep->xfer_count;
+
+ if (len > ep->maxpacket)
+ {
+ len = ep->maxpacket;
+ }
+ len32b = (len + 3U) / 4U;
+
+ USB_WritePacket(USBx, ep->xfer_buff, epnum, len, hpcd->Init.dma_enable);
+
+ ep->xfer_buff += len;
+ ep->xfer_count += len;
+ }
+
+ if(len <= 0U)
+ {
+ fifoemptymsk = 0x1U << epnum;
+ USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
new file mode 100644
index 00000000..9f9b4938
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
@@ -0,0 +1,324 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @version V1.5.2
+ * @date 22-September-2016
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx
+ * @brief PCD Extended HAL module driver
+ * @{
+ */
+#ifdef HAL_PCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @brief PCDEx control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Update FIFO configuration
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set Tx FIFO
+ * @param hpcd: PCD handle
+ * @param fifo: The number of Tx fifo
+ * @param size: Fifo size
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+ uint8_t i = 0U;
+ uint32_t Tx_Offset = 0U;
+
+ /* TXn min size = 16 words. (n : Transmit FIFO index)
+ When a TxFIFO is not used, the Configuration should be as follows:
+ case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txm can use the space allocated for Txn.
+ case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txn should be configured with the minimum space of 16 words
+ The FIFO is used optimally when used TxFIFOs are allocated in the top
+ of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+ When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+ Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+ if(fifo == 0U)
+ {
+ hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16U) | Tx_Offset);
+ }
+ else
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16U;
+ for (i = 0U; i < (fifo - 1U); i++)
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16U);
+ }
+
+ /* Multiply Tx_Size by 2 to get higher performance */
+ hpcd->Instance->DIEPTXF[fifo - 1U] = (uint32_t)(((uint32_t)size << 16U) | Tx_Offset);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Rx FIFO
+ * @param hpcd: PCD handle
+ * @param size: Size of Rx fifo
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+ hpcd->Instance->GRXFSIZ = size;
+
+ return HAL_OK;
+}
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Activate LPM feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = ENABLE;
+ hpcd->LPM_State = LPM_L0;
+ USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+ USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate LPM feature.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = DISABLE;
+ USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+ USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Send LPM message to user layer callback.
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+}
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief HAL_PCDEx_BCD_VBUSDetect : handle BatteryCharging Process
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Start BCD When device is connected */
+ if (USBx_DEVICE->DCTL & USB_OTG_DCTL_SDIS)
+ {
+ /* Enable DCD : Data Contact Detect */
+ USBx->GCCFG |= USB_OTG_GCCFG_DCDEN;
+
+ /* Wait Detect flag or a timeout is happen*/
+ while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0U)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > 1000U)
+ {
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR);
+ return;
+ }
+ }
+
+ /* Right response got */
+ HAL_Delay(100U);
+
+ /* Check Detect flag*/
+ if (USBx->GCCFG & USB_OTG_GCCFG_DCDET)
+ {
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION);
+ }
+
+ /*Primary detection: checks if connected to Standard Downstream Port
+ (without charging capability) */
+ USBx->GCCFG &=~ USB_OTG_GCCFG_DCDEN;
+ USBx->GCCFG |= USB_OTG_GCCFG_PDEN;
+ HAL_Delay(100U);
+
+ if (!(USBx->GCCFG & USB_OTG_GCCFG_PDET))
+ {
+ /* Case of Standard Downstream Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+ }
+ else
+ {
+ /* start secondary detection to check connection to Charging Downstream
+ Port or Dedicated Charging Port */
+ USBx->GCCFG &=~ USB_OTG_GCCFG_PDEN;
+ USBx->GCCFG |= USB_OTG_GCCFG_SDEN;
+ HAL_Delay(100U);
+
+ if ((USBx->GCCFG) & USB_OTG_GCCFG_SDET)
+ {
+ /* case Dedicated Charging Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+ }
+ else
+ {
+ /* case Charging Downstream Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+ }
+ }
+ /* Battery Charging capability discovery finished */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+ }
+}
+
+/**
+ * @brief HAL_PCDEx_ActivateBCD : active BatteryCharging feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->battery_charging_active = ENABLE;
+ USBx->GCCFG |= (USB_OTG_GCCFG_BCDEN);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCDEx_DeActivateBCD : de-active BatteryCharging feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ hpcd->battery_charging_active = DISABLE;
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN);
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCDEx_BatteryCharging_Callback : Send BatteryCharging message to user layer
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+}
+
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
new file mode 100644
index 00000000..93ba19fc
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
@@ -0,0 +1,1710 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.c
+ * @author MCD Application Team
+ * @version V1.5.2
+ * @date 22-September-2016
+ * @brief USB Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+
+ (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
+
+ (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_LL_USB_DRIVER
+ * @{
+ */
+
+#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LL_USB_Exported_Functions USB Low Layer Exported Functions
+ * @{
+ */
+
+/** @defgroup LL_USB_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization/de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the USB Core
+ * @param USBx: USB Instance
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ if (cfg.phy_itface == USB_OTG_ULPI_PHY)
+ {
+
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
+
+ /* Init The ULPI Interface */
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
+
+ /* Select vbus source */
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
+ if(cfg.use_external_vbus == 1U)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
+ }
+ /* Reset after a PHY select */
+ USB_CoreReset(USBx);
+ }
+ else /* FS interface (embedded Phy) */
+ {
+ /* Select FS Embedded PHY */
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+
+ /* Reset after a PHY select and set Host mode */
+ USB_CoreReset(USBx);
+
+ /* Deactivate the power down*/
+ USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
+ }
+
+ if(cfg.dma_enable == ENABLE)
+ {
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EnableGlobalInt
+ * Enables the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_DisableGlobalInt
+ * Disable the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetCurrentMode : Set functional mode
+ * @param USBx : Selected device
+ * @param mode : current core mode
+ * This parameter can be one of these values:
+ * @arg USB_OTG_DEVICE_MODE: Peripheral mode
+ * @arg USB_OTG_HOST_MODE: Host mode
+ * @arg USB_OTG_DRD_MODE: Dual Role Device mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode)
+{
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
+
+ if ( mode == USB_OTG_HOST_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
+ }
+ else if ( mode == USB_OTG_DEVICE_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
+ }
+ HAL_Delay(50U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevInit : Initializes the USB_OTG controller registers
+ * for device mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t i = 0U;
+
+ /*Activate VBUS Sensing B */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+
+ if (cfg.vbus_sensing_enable == 0U)
+ {
+ /* Deactivate VBUS Sensing B */
+ USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
+
+ /* B-peripheral session valid override enable*/
+ USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+ USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+ }
+#else
+ USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
+
+ if (cfg.vbus_sensing_enable == 0U)
+ {
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+ }
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0U;
+
+ /* Device mode configuration */
+ USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
+
+ if(cfg.phy_itface == USB_OTG_ULPI_PHY)
+ {
+ if(cfg.speed == USB_OTG_SPEED_HIGH)
+ {
+ /* Set High speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH);
+ }
+ else
+ {
+ /* set High speed phy in Full speed mode */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH_IN_FULL);
+ }
+ }
+ else
+ {
+ /* Set Full speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
+ }
+
+ /* Flush the FIFOs */
+ USB_FlushTxFifo(USBx , 0x10U); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending Device Interrupts */
+ USBx_DEVICE->DIEPMSK = 0U;
+ USBx_DEVICE->DOEPMSK = 0U;
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+ USBx_DEVICE->DAINTMSK = 0U;
+
+ for (i = 0U; i < cfg.dev_endpoints; i++)
+ {
+ if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
+ {
+ USBx_INEP(i)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_INEP(i)->DIEPCTL = 0U;
+ }
+
+ USBx_INEP(i)->DIEPTSIZ = 0U;
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ }
+
+ for (i = 0U; i < cfg.dev_endpoints; i++)
+ {
+ if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
+ {
+ USBx_OUTEP(i)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_OUTEP(i)->DOEPCTL = 0U;
+ }
+
+ USBx_OUTEP(i)->DOEPTSIZ = 0U;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+
+ USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
+
+ if (cfg.dma_enable == 1U)
+ {
+ /*Set threshold parameters */
+ USBx_DEVICE->DTHRCTL = (USB_OTG_DTHRCTL_TXTHRLEN_6 | USB_OTG_DTHRCTL_RXTHRLEN_6);
+ USBx_DEVICE->DTHRCTL |= (USB_OTG_DTHRCTL_RXTHREN | USB_OTG_DTHRCTL_ISOTHREN | USB_OTG_DTHRCTL_NONISOTHREN);
+
+ i= USBx_DEVICE->DTHRCTL;
+ }
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0U;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xBFFFFFFFU;
+
+ /* Enable the common interrupts */
+ if (cfg.dma_enable == DISABLE)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+ }
+
+ /* Enable interrupts matching to the Device mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
+ USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
+ USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ if(cfg.Sof_enable)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+ }
+
+ if (cfg.vbus_sensing_enable == ENABLE)
+ {
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO
+ * @param USBx : Selected device
+ * @param num : FIFO number
+ * This parameter can be a value from 1 to 15
+ 15 means Flush all Tx FIFOs
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
+{
+ uint32_t count = 0U;
+
+ USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6));
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_FlushRxFifo : Flush Rx FIFO
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0U;
+
+ USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
+ * depending the PHY type and the enumeration speed of the device.
+ * @param USBx : Selected device
+ * @param speed : device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @retval Hal status
+ */
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
+{
+ USBx_DEVICE->DCFG |= speed;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_GetDevSpeed :Return the Dev Speed
+ * @param USBx : Selected device
+ * @retval speed : device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t speed = 0U;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
+ {
+ speed = USB_OTG_SPEED_HIGH;
+ }
+ else if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
+ ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
+ {
+ speed = USB_OTG_SPEED_FULL;
+ }
+ else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ speed = USB_OTG_SPEED_LOW;
+ }
+
+ return speed;
+}
+
+/**
+ * @brief Activate and configure an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num)));
+
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+ }
+ else
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U);
+
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
+ }
+ }
+ return HAL_OK;
+}
+/**
+ * @brief Activate and configure a dedicated endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ static __IO uint32_t debug = 0U;
+
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+
+
+ debug |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+
+ USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num)));
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
+
+ debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0U)*USB_OTG_EP_REG_SIZE);
+ debug = (uint32_t )&USBx_OUTEP(ep->num)->DOEPCTL;
+ debug |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
+ }
+
+ USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U);
+ }
+
+ return HAL_OK;
+}
+/**
+ * @brief De-activate and de-initialize an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ }
+ else
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate and de-initialize a dedicated endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPStartXfer : setup and starts a transfer over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+ uint16_t pktcnt = 0U;
+
+ /* IN endpoint */
+ if (ep->is_in == 1U)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1U)/ ep->maxpacket) << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29U));
+ }
+ }
+
+ if (dma == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+ }
+ else
+ {
+ if (ep->type != EP_TYPE_ISOC)
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0U)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1U << ep->num;
+ }
+ }
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1U << 8U )) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len, dma);
+ }
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U));
+ }
+ else
+ {
+ pktcnt = (ep->xfer_len + ep->maxpacket -1U)/ ep->maxpacket;
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19U));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
+ }
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)ep->xfer_buff;
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1U << 8U )) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+ /* IN endpoint */
+ if (ep->is_in == 1U)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+
+ if(ep->xfer_len > ep->maxpacket)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ }
+
+ if (dma == 1)
+ {
+ USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+ }
+ else
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0U)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1U << (ep->num);
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len > 0U)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket));
+
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)(ep->xfer_buff);
+ }
+
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : pointer to source buffer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to write
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma)
+{
+ uint32_t count32b = 0U , i = 0U;
+
+ if (dma == 0U)
+ {
+ count32b = (len + 3U) / 4U;
+ for (i = 0U; i < count32b; i++, src += 4U)
+ {
+ USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : source pointer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to read
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval pointer to destination buffer
+ */
+void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+ uint32_t i=0U;
+ uint32_t count32b = (len + 3U) / 4U;
+
+ for ( i = 0U; i < count32b; i++, dest += 4U )
+ {
+ *(__packed uint32_t *)dest = USBx_DFIFO(0U);
+
+ }
+ return ((void *)dest);
+}
+
+/**
+ * @brief USB_EPSetStall : set a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
+ }
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
+ }
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
+ }
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_EPClearStall : Clear a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_StopDevice : Stop the usb device mode
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t i;
+
+ /* Clear Pending interrupt */
+ for (i = 0U; i < 15U ; i++)
+ {
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+
+ /* Clear interrupt masks */
+ USBx_DEVICE->DIEPMSK = 0U;
+ USBx_DEVICE->DOEPMSK = 0U;
+ USBx_DEVICE->DAINTMSK = 0U;
+
+ /* Flush the FIFO */
+ USB_FlushRxFifo(USBx);
+ USB_FlushTxFifo(USBx , 0x10U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevAddress : Stop the usb device mode
+ * @param USBx : Selected device
+ * @param address : new device address to be assigned
+ * This parameter can be a value from 0 to 255
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+{
+ USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
+ USBx_DEVICE->DCFG |= (address << 4U) & USB_OTG_DCFG_DAD ;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadInterrupts: return the global USB interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v = 0U;
+
+ v = USBx->GINTSTS;
+ v &= USBx->GINTMSK;
+ return v;
+}
+
+/**
+ * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v;
+ v = USBx_DEVICE->DAINT;
+ v &= USBx_DEVICE->DAINTMSK;
+ return ((v & 0xffff0000U) >> 16U);
+}
+
+/**
+ * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v;
+ v = USBx_DEVICE->DAINT;
+ v &= USBx_DEVICE->DAINTMSK;
+ return ((v & 0xFFFFU));
+}
+
+/**
+ * @brief Returns Device OUT EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device OUT EP Interrupt register
+ */
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t v;
+ v = USBx_OUTEP(epnum)->DOEPINT;
+ v &= USBx_DEVICE->DOEPMSK;
+ return v;
+}
+
+/**
+ * @brief Returns Device IN EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device IN EP Interrupt register
+ */
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t v, msk, emp;
+
+ msk = USBx_DEVICE->DIEPMSK;
+ emp = USBx_DEVICE->DIEPEMPMSK;
+ msk |= ((emp >> epnum) & 0x1U) << 7U;
+ v = USBx_INEP(epnum)->DIEPINT & msk;
+ return v;
+}
+
+/**
+ * @brief USB_ClearInterrupts: clear a USB interrupt
+ * @param USBx : Selected device
+ * @param interrupt : interrupt flag
+ * @retval None
+ */
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
+{
+ USBx->GINTSTS |= interrupt;
+}
+
+/**
+ * @brief Returns USB core mode
+ * @param USBx : Selected device
+ * @retval return core mode : Host or Device
+ * This parameter can be one of these values:
+ * 0 : Host
+ * 1 : Device
+ */
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx->GINTSTS ) & 0x1U);
+}
+
+
+/**
+ * @brief Activate EP0 for Setup transactions
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
+{
+ /* Set the MPS of the IN EP based on the enumeration speed */
+ USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ USBx_INEP(0U)->DIEPCTL |= 3U;
+ }
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Prepare the EP0 to start the first control setup
+ * @param USBx : Selected device
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @param psetup : pointer to setup packet
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup)
+{
+ USBx_OUTEP(0U)->DOEPTSIZ = 0U;
+ USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U);
+ USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT;
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup;
+ /* EP enable */
+ USBx_OUTEP(0U)->DOEPCTL = 0x80008000U;
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Reset the USB Core (needed after USB clock settings change)
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0U;
+
+ /* Wait for AHB master IDLE state. */
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U);
+
+ /* Core Soft Reset */
+ count = 0U;
+ USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_HostInit : Initializes the USB OTG controller registers
+ * for Host mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t i;
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0U;
+
+ /* Activate VBUS Sensing B */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+#else
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+ /* Disable the FS/LS support mode only */
+ if((cfg.speed == USB_OTG_SPEED_FULL)&&
+ (USBx != USB_OTG_FS))
+ {
+ USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
+ }
+ else
+ {
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
+ }
+
+ /* Make sure the FIFOs are flushed. */
+ USB_FlushTxFifo(USBx, 0x10U); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending HC Interrupts */
+ for (i = 0U; i < cfg.Host_channels; i++)
+ {
+ USBx_HC(i)->HCINT = 0xFFFFFFFFU;
+ USBx_HC(i)->HCINTMSK = 0U;
+ }
+
+ /* Enable VBUS driving */
+ USB_DriveVbus(USBx, 1U);
+
+ HAL_Delay(200U);
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0U;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xFFFFFFFFU;
+
+ if(USBx == USB_OTG_FS)
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x80U;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60U << 16U)& USB_OTG_NPTXFD) | 0x80U);
+ USBx->HPTXFSIZ = (uint32_t )(((0x40U << 16U)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U);
+ }
+ else
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x200U;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100U << 16U)& USB_OTG_NPTXFD) | 0x200U);
+ USBx->HPTXFSIZ = (uint32_t )(((0xE0U << 16U)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300U);
+ }
+
+ /* Enable the common interrupts */
+ if (cfg.dma_enable == DISABLE)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+ }
+
+ /* Enable interrupts matching to the Host mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\
+ USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
+ * HCFG register on the PHY type and set the right frame interval
+ * @param USBx : Selected device
+ * @param freq : clock frequency
+ * This parameter can be one of these values:
+ * HCFG_48_MHZ : Full Speed 48 MHz Clock
+ * HCFG_6_MHZ : Low Speed 6 MHz Clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
+{
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
+ USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
+
+ if (freq == HCFG_48_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)48000U;
+ }
+ else if (freq == HCFG_6_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)6000U;
+ }
+ return HAL_OK;
+}
+
+/**
+* @brief USB_OTG_ResetPort : Reset Host Port
+ * @param USBx : Selected device
+ * @retval HAL status
+ * @note (1)The application must wait at least 10 ms
+ * before clearing the reset bit.
+ */
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
+ HAL_Delay (10U); /* See Note #1 */
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DriveVbus : activate or de-activate vbus
+ * @param state : VBUS state
+ * This parameter can be one of these values:
+ * 0 : VBUS Active
+ * 1 : VBUS Inactive
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U))
+ {
+ USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
+ }
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U))
+ {
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Return Host Core speed
+ * @param USBx : Selected device
+ * @retval speed : Host speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+ return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17U);
+}
+
+/**
+ * @brief Return Host Current Frame number
+ * @param USBx : Selected device
+ * @retval current frame number
+*/
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
+{
+ return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
+}
+
+/**
+ * @brief Initialize a host channel
+ * @param USBx : Selected device
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param epnum : Endpoint number
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed : Current device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochronous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param mps : Max Packet Size
+ * This parameter can be a value from 0 to32K
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+
+ /* Clear old interrupt conditions for this host channel. */
+ USBx_HC(ch_num)->HCINT = 0xFFFFFFFFU;
+
+ /* Enable channel interrupts required for this transfer. */
+ switch (ep_type)
+ {
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_NAKM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+ else
+ {
+ if(USBx != USB_OTG_FS)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ }
+ }
+ break;
+
+ case EP_TYPE_INTR:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_NAKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+
+ break;
+ case EP_TYPE_ISOC:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_ACKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
+ }
+ break;
+ }
+
+ /* Enable the top level host channel interrupt. */
+ USBx_HOST->HAINTMSK |= (1 << ch_num);
+
+ /* Make sure host channel interrupts are enabled. */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
+
+ /* Program the HCCHAR register */
+ USBx_HC(ch_num)->HCCHAR = (((dev_address << 22U) & USB_OTG_HCCHAR_DAD) |\
+ (((epnum & 0x7FU)<< 11U) & USB_OTG_HCCHAR_EPNUM)|\
+ ((((epnum & 0x80U) == 0x80U)<< 15U) & USB_OTG_HCCHAR_EPDIR)|\
+ (((speed == USB_OTG_SPEED_LOW)<< 17U) & USB_OTG_HCCHAR_LSDEV)|\
+ ((ep_type << 18U) & USB_OTG_HCCHAR_EPTYP)|\
+ (mps & USB_OTG_HCCHAR_MPSIZ));
+
+ if (ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start a transfer over a host channel
+ * @param USBx : Selected device
+ * @param hc : pointer to host channel structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL state
+ */
+#if defined (__CC_ARM) /*!< ARM Compiler */
+#pragma O0
+#elif defined (__GNUC__) /*!< GNU Compiler */
+#pragma GCC optimize ("O0")
+#endif /* __CC_ARM */
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma)
+{
+ uint8_t is_oddframe = 0U;
+ uint16_t len_words = 0U;
+ uint16_t num_packets = 0U;
+ uint16_t max_hc_pkt_count = 256U;
+ uint32_t tmpreg = 0U;
+
+ if((USBx != USB_OTG_FS) && (hc->speed == USB_OTG_SPEED_HIGH))
+ {
+ if((dma == 0U) && (hc->do_ping == 1U))
+ {
+ USB_DoPing(USBx, hc->ch_num);
+ return HAL_OK;
+ }
+ else if(dma == 1U)
+ {
+ USBx_HC(hc->ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ hc->do_ping = 0U;
+ }
+ }
+
+ /* Compute the expected number of packets associated to the transfer */
+ if (hc->xfer_len > 0U)
+ {
+ num_packets = (hc->xfer_len + hc->max_packet - 1U) / hc->max_packet;
+
+ if (num_packets > max_hc_pkt_count)
+ {
+ num_packets = max_hc_pkt_count;
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+ }
+ else
+ {
+ num_packets = 1U;
+ }
+ if (hc->ep_is_in)
+ {
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+
+ /* Initialize the HCTSIZn register */
+ USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
+ ((num_packets << 19U) & USB_OTG_HCTSIZ_PKTCNT) |\
+ (((hc->data_pid) << 29U) & USB_OTG_HCTSIZ_DPID);
+
+ if (dma)
+ {
+ /* xfer_buff MUST be 32-bits aligned */
+ USBx_HC(hc->ch_num)->HCDMA = (uint32_t)hc->xfer_buff;
+ }
+
+ is_oddframe = (USBx_HOST->HFNUM & 0x01U) ? 0U : 1U;
+ USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
+ USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29U);
+
+ /* Set host channel enable */
+ tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
+
+ if (dma == 0U) /* Slave mode */
+ {
+ if((hc->ep_is_in == 0U) && (hc->xfer_len > 0U))
+ {
+ switch(hc->ep_type)
+ {
+ /* Non periodic transfer */
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+
+ len_words = (hc->xfer_len + 3U) / 4U;
+
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx->HNPTXSTS & 0xFFFFU))
+ {
+ /* need to process data in nptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+ }
+ break;
+ /* Periodic transfer */
+ case EP_TYPE_INTR:
+ case EP_TYPE_ISOC:
+ len_words = (hc->xfer_len + 3U) / 4U;
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */
+ {
+ /* need to process data in ptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Write packet into the Tx FIFO. */
+ USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len, 0);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read all host channel interrupts status
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx_HOST->HAINT) & 0xFFFFU);
+}
+
+/**
+ * @brief Halt a host channel
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
+{
+ uint32_t count = 0U;
+
+ /* Check for space in the request queue to issue the halt. */
+ if (((((USBx_HC(hc_num)->HCCHAR) & USB_OTG_HCCHAR_EPTYP) >> 18) == HCCHAR_CTRL) || (((((USBx_HC(hc_num)->HCCHAR) &
+ USB_OTG_HCCHAR_EPTYP) >> 18) == HCCHAR_BULK)))
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx->HNPTXSTS & 0xFF0000U) == 0U)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx_HOST->HPTXSTS & 0xFFFFU) == 0U)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initiate Do Ping protocol
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
+{
+ uint8_t num_packets = 1U;
+ uint32_t tmpreg = 0U;
+
+ USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19U) & USB_OTG_HCTSIZ_PKTCNT) |\
+ USB_OTG_HCTSIZ_DOPING;
+
+ /* Set host channel enable */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Host Core
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t i;
+ uint32_t count = 0U;
+ uint32_t value;
+
+ USB_DisableGlobalInt(USBx);
+
+ /* Flush FIFO */
+ USB_FlushTxFifo(USBx, 0x10U);
+ USB_FlushRxFifo(USBx);
+
+ /* Flush out any leftover queued requests. */
+ for (i = 0U; i <= 15U; i++)
+ {
+
+ value = USBx_HC(i)->HCCHAR ;
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value &= ~USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+ USBx_HC(i)->HCCHAR = value;
+ }
+
+ /* Halt all channels to put them into a known state. */
+ for (i = 0U; i <= 15U; i++)
+ {
+ value = USBx_HC(i)->HCCHAR ;
+
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value |= USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+
+ USBx_HC(i)->HCCHAR = value;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+
+ /* Clear any pending Host interrupts */
+ USBx_HOST->HAINT = 0xFFFFFFFFU;
+ USBx->GINTSTS = 0xFFFFFFFFU;
+ USB_EnableGlobalInt(USBx);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/stm32f4xx_hal_conf.h b/Inc/stm32f4xx_hal_conf.h
index 98ae2bbd..b88b08fd 100644
--- a/Inc/stm32f4xx_hal_conf.h
+++ b/Inc/stm32f4xx_hal_conf.h
@@ -79,7 +79,7 @@
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
-/* #define HAL_PCD_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
diff --git a/Inc/stm32f4xx_it.h b/Inc/stm32f4xx_it.h
index deaf530f..e7b8672f 100644
--- a/Inc/stm32f4xx_it.h
+++ b/Inc/stm32f4xx_it.h
@@ -53,6 +53,7 @@ void UsageFault_Handler(void);
void DebugMon_Handler(void);
void SysTick_Handler(void);
void ADC_IRQHandler(void);
+void OTG_FS_IRQHandler(void);
#ifdef __cplusplus
}
diff --git a/Inc/usb_device.h b/Inc/usb_device.h
new file mode 100644
index 00000000..7939ca48
--- /dev/null
+++ b/Inc/usb_device.h
@@ -0,0 +1,74 @@
+/**
+ ******************************************************************************
+ * @file : USB_DEVICE
+ * @version : v1.0_Cube
+ * @brief : Header for usb_device file.
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __usb_device_H
+#define __usb_device_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal.h"
+#include "usbd_def.h"
+
+extern USBD_HandleTypeDef hUsbDeviceFS;
+
+/* USB_Device init function */
+void MX_USB_DEVICE_Init(void);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__usb_device_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/usbd_cdc_if.h b/Inc/usbd_cdc_if.h
new file mode 100644
index 00000000..17fe53d8
--- /dev/null
+++ b/Inc/usbd_cdc_if.h
@@ -0,0 +1,132 @@
+/**
+ ******************************************************************************
+ * @file : usbd_cdc_if.h
+ * @brief : Header for usbd_cdc_if file.
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CDC_IF_H
+#define __USBD_CDC_IF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+/* USER CODE BEGIN INCLUDE */
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CDC_IF
+ * @brief header
+ * @{
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Defines
+ * @{
+ */
+/* USER CODE BEGIN EXPORTED_DEFINES */
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Types
+ * @{
+ */
+/* USER CODE BEGIN EXPORTED_TYPES */
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Macros
+ * @{
+ */
+/* USER CODE BEGIN EXPORTED_MACRO */
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_AUDIO_IF_Exported_Variables
+ * @{
+ */
+extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype
+ * @{
+ */
+uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+/* USER CODE END EXPORTED_FUNCTIONS */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CDC_IF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/usbd_conf.h b/Inc/usbd_conf.h
new file mode 100644
index 00000000..cb8fd179
--- /dev/null
+++ b/Inc/usbd_conf.h
@@ -0,0 +1,183 @@
+/**
+ ******************************************************************************
+ * @file : usbd_conf.h
+ * @version : v1.0_Cube
+ * @brief : Header for usbd_conf file.
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+#ifdef __cplusplus
+ extern "C" {
+#endif
+/* Includes ------------------------------------------------------------------*/
+#include
+#include
+#include
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_CONF
+ * @brief usb otg low level driver configuration file
+ * @{
+ */
+
+/** @defgroup USBD_CONF_Exported_Defines
+ * @{
+ */
+
+/*---------- -----------*/
+#define USBD_MAX_NUM_INTERFACES 1
+/*---------- -----------*/
+#define USBD_MAX_NUM_CONFIGURATION 1
+/*---------- -----------*/
+#define USBD_MAX_STR_DESC_SIZ 512
+/*---------- -----------*/
+#define USBD_SUPPORT_USER_STRING 0
+/*---------- -----------*/
+#define USBD_DEBUG_LEVEL 0
+/*---------- -----------*/
+#define USBD_LPM_ENABLED 0
+/*---------- -----------*/
+#define USBD_SELF_POWERED 1
+/*---------- -----------*/
+#define USBD_CDC_INTERVAL 1000
+
+/****************************************/
+/* #define for FS and HS identification */
+#define DEVICE_FS 0
+#define DEVICE_HS 1
+
+/** @defgroup USBD_Exported_Macros
+ * @{
+ */
+
+ /* Memory management macros */
+#define USBD_malloc malloc
+#define USBD_free free
+#define USBD_memset memset
+#define USBD_memcpy memcpy
+
+#define USBD_Delay HAL_Delay
+
+ /* DEBUG macros */
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...) printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...) printf("ERROR: ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...) printf("DEBUG : ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+ * @}
+ */
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype
+ * @{
+ */
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF__H__ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Inc/usbd_desc.h b/Inc/usbd_desc.h
new file mode 100644
index 00000000..1fb50263
--- /dev/null
+++ b/Inc/usbd_desc.h
@@ -0,0 +1,114 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.h
+ * @version : v1.0_Cube
+ * @brief : Header for usbd_desc file.
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC__H__
+#define __USBD_DESC__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DESC
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DESC_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Variables
+ * @{
+ */
+extern USBD_DescriptorsTypeDef FS_Desc;
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DESC_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/version.h b/Inc/version.h
new file mode 100644
index 00000000..b5b3e21d
--- /dev/null
+++ b/Inc/version.h
@@ -0,0 +1,10 @@
+/**
+ ******************************************************************************
+ * @file : version.h
+ * @brief : This file implements printf functionality
+ ******************************************************************************
+*/
+
+#define ODRIVE_FW_VERSION_MAJOR 0
+#define ODRIVE_FW_VERSION_MINOR 1
+#define ODRIVE_FW_VERSION_PATCH 0
diff --git a/Makefile b/Makefile
index 7ae4b15d..2412327b 100644
--- a/Makefile
+++ b/Makefile
@@ -15,7 +15,7 @@ DEBUG = 1
# optimization
# OPT = -O3 -ffast-math -flto
# OPT = -O3 -ffast-math
-OPT = -O0 -ffast-math
+OPT = -O0 -ffast-math -u _printf_float -u _scanf_float
#######################################
# pathes
@@ -36,6 +36,11 @@ C_SOURCES = \
Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c \
+ Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
+ Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
+ Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
+ Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
+ Src/system_stm32f4xx.c \
Src/stm32f4xx_it.c \
Src/tim.c \
Src/gpio.c \
@@ -45,7 +50,9 @@ C_SOURCES = \
Src/spi.c \
Src/stm32f4xx_hal_msp.c \
Src/can.c \
- Src/system_stm32f4xx.c \
+ Src/usbd_conf.c \
+ Src/usbd_desc.c \
+ Src/usb_device.c \
Drivers/DRV8301/drv8301.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \
@@ -65,6 +72,11 @@ C_SOURCES = \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c \
+ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c \
+ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c \
+ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c \
+ Src/usbd_cdc_if.c \
+ Src/syscalls.c \
MotorControl/utils.c \
MotorControl/low_level.c
ASM_SOURCES = \
@@ -93,6 +105,8 @@ C_INCLUDES = -IMiddlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F
C_INCLUDES += -IMiddlewares/Third_Party/FreeRTOS/Source/include
C_INCLUDES += -IMiddlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS
C_INCLUDES += -IDrivers/DRV8301
+C_INCLUDES += -IMiddlewares/ST/STM32_USB_Device_Library/Core/Inc
+C_INCLUDES += -IMiddlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc
C_INCLUDES += -IDrivers/STM32F4xx_HAL_Driver/Inc
C_INCLUDES += -IDrivers/STM32F4xx_HAL_Driver/Inc/Legacy
C_INCLUDES += -IDrivers/CMSIS/Device/ST/STM32F4xx/Include
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h
new file mode 100644
index 00000000..31397d24
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h
@@ -0,0 +1,179 @@
+/**
+ ******************************************************************************
+ * @file usbd_cdc.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief header file for the usbd_cdc.c file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CDC_H
+#define __USB_CDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup usbd_cdc
+ * @brief This file is the Header file for usbd_cdc.c
+ * @{
+ */
+
+
+/** @defgroup usbd_cdc_Exported_Defines
+ * @{
+ */
+#define CDC_IN_EP 0x81 /* EP1 for data IN */
+#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
+#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
+
+/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
+#define CDC_DATA_HS_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */
+#define CDC_DATA_FS_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
+#define CDC_CMD_PACKET_SIZE 8 /* Control Endpoint Packet size */
+
+#define USB_CDC_CONFIG_DESC_SIZ 67
+#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
+#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
+
+#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
+#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
+
+/*---------------------------------------------------------------------*/
+/* CDC definitions */
+/*---------------------------------------------------------------------*/
+#define CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define CDC_SET_COMM_FEATURE 0x02
+#define CDC_GET_COMM_FEATURE 0x03
+#define CDC_CLEAR_COMM_FEATURE 0x04
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+#define CDC_SEND_BREAK 0x23
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+typedef struct
+{
+ uint32_t bitrate;
+ uint8_t format;
+ uint8_t paritytype;
+ uint8_t datatype;
+}USBD_CDC_LineCodingTypeDef;
+
+typedef struct _USBD_CDC_Itf
+{
+ int8_t (* Init) (void);
+ int8_t (* DeInit) (void);
+ int8_t (* Control) (uint8_t, uint8_t * , uint16_t);
+ int8_t (* Receive) (uint8_t *, uint32_t *);
+
+}USBD_CDC_ItfTypeDef;
+
+
+typedef struct
+{
+ uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE/4]; /* Force 32bits alignment */
+ uint8_t CmdOpCode;
+ uint8_t CmdLength;
+ uint8_t *RxBuffer;
+ uint8_t *TxBuffer;
+ uint32_t RxLength;
+ uint32_t TxLength;
+
+ __IO uint32_t TxState;
+ __IO uint32_t RxState;
+}
+USBD_CDC_HandleTypeDef;
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+
+extern USBD_ClassTypeDef USBD_CDC;
+#define USBD_CDC_CLASS &USBD_CDC
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Exported_Functions
+ * @{
+ */
+uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev,
+ USBD_CDC_ItfTypeDef *fops);
+
+uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff,
+ uint16_t length);
+
+uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff);
+
+uint8_t USBD_CDC_ReceivePacket (USBD_HandleTypeDef *pdev);
+
+uint8_t USBD_CDC_TransmitPacket (USBD_HandleTypeDef *pdev);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_CDC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c
new file mode 100644
index 00000000..06b3fc83
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c
@@ -0,0 +1,925 @@
+/**
+ ******************************************************************************
+ * @file usbd_cdc.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the high layer firmware functions to manage the
+ * following functionalities of the USB CDC Class:
+ * - Initialization and Configuration of high and low layer
+ * - Enumeration as CDC Device (and enumeration for each implemented memory interface)
+ * - OUT/IN data transfer
+ * - Command IN transfer (class requests management)
+ * - Error management
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * CDC Class Driver Description
+ * ===================================================================
+ * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
+ * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
+ * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
+ * This driver implements the following aspects of the specification:
+ * - Device descriptor management
+ * - Configuration descriptor management
+ * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
+ * - Requests management (as described in section 6.2 in specification)
+ * - Abstract Control Model compliant
+ * - Union Functional collection (using 1 IN endpoint for control)
+ * - Data interface class
+ *
+ * These aspects may be enriched or modified for a specific user application.
+ *
+ * This driver doesn't implement the following aspects of the specification
+ * (but it is possible to manage these features with some modifications on this driver):
+ * - Any class-specific aspect relative to communication classes should be managed by user application.
+ * - All communication classes other than PSTN are not managed
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+#include "usbd_desc.h"
+#include "usbd_ctlreq.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_CDC
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_CDC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_FunctionPrototypes
+ * @{
+ */
+
+
+static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev);
+
+static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
+
+uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length);
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
+{
+ USB_LEN_DEV_QUALIFIER_DESC,
+ USB_DESC_TYPE_DEVICE_QUALIFIER,
+ 0x00,
+ 0x02,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x40,
+ 0x01,
+ 0x00,
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Variables
+ * @{
+ */
+
+
+/* CDC interface class callbacks structure */
+USBD_ClassTypeDef USBD_CDC =
+{
+ USBD_CDC_Init,
+ USBD_CDC_DeInit,
+ USBD_CDC_Setup,
+ NULL, /* EP0_TxSent, */
+ USBD_CDC_EP0_RxReady,
+ USBD_CDC_DataIn,
+ USBD_CDC_DataOut,
+ NULL,
+ NULL,
+ NULL,
+ USBD_CDC_GetHSCfgDesc,
+ USBD_CDC_GetFSCfgDesc,
+ USBD_CDC_GetOtherSpeedCfgDesc,
+ USBD_CDC_GetDeviceQualifierDescriptor,
+};
+
+/* USB CDC device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 0 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0x10, /* bInterval: */
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
+ 0x00 /* bInterval: ignore for Bulk transfer */
+} ;
+
+
+/* USB CDC device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 0 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0x10, /* bInterval: */
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
+ 0x00 /* bInterval: ignore for Bulk transfer */
+} ;
+
+__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ 0x09, /* bLength: Configuation Descriptor size */
+ USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
+ USB_CDC_CONFIG_DESC_SIZ,
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interfaces */
+ 0x01, /* bConfigurationValue: */
+ 0x04, /* iConfiguration: */
+ 0xC0, /* bmAttributes: */
+ 0x32, /* MaxPower 100 mA */
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0xFF, /* bInterval: */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ 0x40, /* wMaxPacketSize: */
+ 0x00,
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ 0x40, /* wMaxPacketSize: */
+ 0x00,
+ 0x00 /* bInterval */
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief USBD_CDC_Init
+ * Initialize the CDC interface
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+ USBD_CDC_HandleTypeDef *hcdc;
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ CDC_IN_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_HS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ CDC_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+
+ }
+ else
+ {
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ CDC_IN_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_FS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ CDC_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+ /* Open Command IN EP */
+ USBD_LL_OpenEP(pdev,
+ CDC_CMD_EP,
+ USBD_EP_TYPE_INTR,
+ CDC_CMD_PACKET_SIZE);
+
+
+ pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef));
+
+ if(pdev->pClassData == NULL)
+ {
+ ret = 1;
+ }
+ else
+ {
+ hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Init physical Interface components */
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init();
+
+ /* Init Xfer states */
+ hcdc->TxState =0;
+ hcdc->RxState =0;
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+ }
+ else
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+
+
+ }
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_Init
+ * DeInitialize the CDC layer
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+
+ /* Open EP IN */
+ USBD_LL_CloseEP(pdev,
+ CDC_IN_EP);
+
+ /* Open EP OUT */
+ USBD_LL_CloseEP(pdev,
+ CDC_OUT_EP);
+
+ /* Open Command IN EP */
+ USBD_LL_CloseEP(pdev,
+ CDC_CMD_EP);
+
+
+ /* DeInit physical Interface components */
+ if(pdev->pClassData != NULL)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit();
+ USBD_free(pdev->pClassData);
+ pdev->pClassData = NULL;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_Setup
+ * Handle the CDC specific requests
+ * @param pdev: instance
+ * @param req: usb requests
+ * @retval status
+ */
+static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+ static uint8_t ifalt = 0;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS :
+ if (req->wLength)
+ {
+ if (req->bmRequest & 0x80)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ USBD_CtlSendData (pdev,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ }
+ else
+ {
+ hcdc->CmdOpCode = req->bRequest;
+ hcdc->CmdLength = req->wLength;
+
+ USBD_CtlPrepareRx (pdev,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ }
+
+ }
+ else
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
+ (uint8_t*)req,
+ 0);
+ }
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_INTERFACE :
+ USBD_CtlSendData (pdev,
+ &ifalt,
+ 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE :
+ break;
+ }
+
+ default:
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_DataIn
+ * Data sent on non-control IN endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if(pdev->pClassData != NULL)
+ {
+
+ hcdc->TxState = 0;
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Get the received data length */
+ hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum);
+
+ /* USB data will be immediately processed, this allow next USB traffic being
+ NAKed till the end of the application Xfer */
+ if(pdev->pClassData != NULL)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength);
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF))
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode,
+ (uint8_t *)hcdc->data,
+ hcdc->CmdLength);
+ hcdc->CmdOpCode = 0xFF;
+
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_GetFSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_CfgFSDesc);
+ return USBD_CDC_CfgFSDesc;
+}
+
+/**
+ * @brief USBD_CDC_GetHSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_CfgHSDesc);
+ return USBD_CDC_CfgHSDesc;
+}
+
+/**
+ * @brief USBD_CDC_GetCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_OtherSpeedCfgDesc);
+ return USBD_CDC_OtherSpeedCfgDesc;
+}
+
+/**
+* @brief DeviceQualifierDescriptor
+* return Device Qualifier descriptor
+* @param length : pointer data length
+* @retval pointer to descriptor buffer
+*/
+uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_DeviceQualifierDesc);
+ return USBD_CDC_DeviceQualifierDesc;
+}
+
+/**
+* @brief USBD_CDC_RegisterInterface
+ * @param pdev: device instance
+ * @param fops: CD Interface callback
+ * @retval status
+ */
+uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev,
+ USBD_CDC_ItfTypeDef *fops)
+{
+ uint8_t ret = USBD_FAIL;
+
+ if(fops != NULL)
+ {
+ pdev->pUserData= fops;
+ ret = USBD_OK;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_SetTxBuffer
+ * @param pdev: device instance
+ * @param pbuff: Tx Buffer
+ * @retval status
+ */
+uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff,
+ uint16_t length)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ hcdc->TxBuffer = pbuff;
+ hcdc->TxLength = length;
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_CDC_SetRxBuffer
+ * @param pdev: device instance
+ * @param pbuff: Rx Buffer
+ * @retval status
+ */
+uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ hcdc->RxBuffer = pbuff;
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if(pdev->pClassData != NULL)
+ {
+ if(hcdc->TxState == 0)
+ {
+ /* Tx Transfer in progress */
+ hcdc->TxState = 1;
+
+ /* Transmit next packet */
+ USBD_LL_Transmit(pdev,
+ CDC_IN_EP,
+ hcdc->TxBuffer,
+ hcdc->TxLength);
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_BUSY;
+ }
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+
+/**
+ * @brief USBD_CDC_ReceivePacket
+ * prepare OUT Endpoint for reception
+ * @param pdev: device instance
+ * @retval status
+ */
+uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Suspend or Resume USB Out process */
+ if(pdev->pClassData != NULL)
+ {
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+ }
+ else
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h
new file mode 100644
index 00000000..6550cd78
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h
@@ -0,0 +1,167 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for usbd_core.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay (uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
new file mode 100644
index 00000000..66380fdc
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
@@ -0,0 +1,113 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_req.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h
new file mode 100644
index 00000000..969e3248
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h
@@ -0,0 +1,330 @@
+/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief General defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
+#define USB_LEN_DEV_DESC 0x12
+#define USB_LEN_CFG_DESC 0x09
+#define USB_LEN_IF_DESC 0x09
+#define USB_LEN_EP_DESC 0x07
+#define USB_LEN_OTG_DESC 0x03
+#define USB_LEN_LANGID_STR_DESC 0x04
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
+
+#define USBD_IDX_LANGID_STR 0x00
+#define USBD_IDX_MFC_STR 0x01
+#define USBD_IDX_PRODUCT_STR 0x02
+#define USBD_IDX_SERIAL_STR 0x03
+#define USBD_IDX_CONFIG_STR 0x04
+#define USBD_IDX_INTERFACE_STR 0x05
+
+#define USB_REQ_TYPE_STANDARD 0x00
+#define USB_REQ_TYPE_CLASS 0x20
+#define USB_REQ_TYPE_VENDOR 0x40
+#define USB_REQ_TYPE_MASK 0x60
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00
+#define USB_REQ_RECIPIENT_INTERFACE 0x01
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02
+#define USB_REQ_RECIPIENT_MASK 0x03
+
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_DESC_TYPE_DEVICE 1
+#define USB_DESC_TYPE_CONFIGURATION 2
+#define USB_DESC_TYPE_STRING 3
+#define USB_DESC_TYPE_INTERFACE 4
+#define USB_DESC_TYPE_ENDPOINT 5
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
+#define USB_DESC_TYPE_BOS 0x0F
+
+#define USB_CONFIG_REMOTE_WAKEUP 2
+#define USB_CONFIG_SELF_POWERED 1
+
+#define USB_FEATURE_EP_HALT 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+#define USB_FEATURE_TEST_MODE 2
+
+#define USB_DEVICE_CAPABITY_TYPE 0x10
+
+#define USB_HS_MAX_PACKET_SIZE 512
+#define USB_FS_MAX_PACKET_SIZE 64
+#define USB_MAX_EP0_SIZE 64
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 1
+#define USBD_STATE_ADDRESSED 2
+#define USBD_STATE_CONFIGURED 3
+#define USBD_STATE_SUSPENDED 4
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0
+#define USBD_EP0_SETUP 1
+#define USBD_EP0_DATA_IN 2
+#define USBD_EP0_DATA_OUT 3
+#define USBD_EP0_STATUS_IN 4
+#define USBD_EP0_STATUS_OUT 5
+#define USBD_EP0_STALL 6
+
+#define USBD_EP_TYPE_CTRL 0
+#define USBD_EP_TYPE_ISOC 1
+#define USBD_EP_TYPE_BULK 2
+#define USBD_EP_TYPE_INTR 3
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
+ uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING == 1)
+ uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length);
+#endif
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0,
+ USBD_SPEED_FULL = 1,
+ USBD_SPEED_LOW = 2,
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+ USBD_OK = 0,
+ USBD_BUSY,
+ USBD_FAIL,
+}USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#if (USBD_LPM_ENABLED == 1)
+ uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[15];
+ USBD_EndpointTypeDef ep_out[15];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
+
+#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
+#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+#else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
new file mode 100644
index 00000000..dbf8ca19
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
@@ -0,0 +1,128 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_IOREQ_H
+#define __USBD_IOREQ_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *buf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
+
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
+ uint8_t epnum);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_IOREQ_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c
new file mode 100644
index 00000000..86fc2dec
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c
@@ -0,0 +1,565 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+/**
+* @}
+*/
+
+
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initializes the device stack and load the class driver
+* @param pdev: device instance
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if(pdev == NULL)
+ {
+ USBD_ErrLog("Invalid Device handle");
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if(pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if(pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if(pclass != 0)
+ {
+ /* link the class to the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+ USBD_ErrLog("Invalid Class handle");
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
+{
+
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if(pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if(pdev->pClass->Init(pdev, cfgidx) == 0)
+ {
+ ret = USBD_OK;
+ }
+ }
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and De-initialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1F)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq (pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_out[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx (pdev,
+ pdata,
+ MIN(pep->rem_length ,pep->maxpacket));
+ }
+ else
+ {
+ if((pdev->pClass->EP0_RxReady != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ }
+ else if((pdev->pClass->DataOut != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_in[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData (pdev,
+ pdata,
+ pep->rem_length);
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ { /* last packet is MPS multiple, so send ZLP packet */
+ if((pep->total_length % pep->maxpacket == 0) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len ))
+ {
+
+ USBD_CtlContinueSendData(pdev , NULL, 0);
+ pdev->ep0_data_len = 0;
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ {
+ if((pdev->pClass->EP0_TxSent != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ if (pdev->dev_test_mode == 1)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0;
+ }
+ }
+ else if((pdev->pClass->DataIn != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev,
+ 0x00,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev,
+ 0x80,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+ /* Upon Reset call user call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ if (pdev->pClassData)
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+
+ return USBD_OK;
+}
+
+
+
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_state = pdev->dev_old_state;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if(pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if(pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c
new file mode 100644
index 00000000..7701a6d3
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ USBD_GetDescriptor (pdev, req) ;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress(pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus (pdev , req);
+ break;
+
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature (pdev , req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature (pdev , req);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ if((req->wLength == 0)&& (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ USBD_EndpointTypeDef *pep;
+ ep_addr = LOBYTE(req->wIndex);
+
+ /* Check if it is a class request */
+ if ((req->bmRequest & 0x60) == 0x20)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ return USBD_OK;
+ }
+
+ switch (req->bRequest)
+ {
+
+ case USB_REQ_SET_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+
+ }
+ }
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_ClearStallEP(pdev , ep_addr);
+ pdev->pClass->Setup (pdev, req);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
+ &pdev->ep_out[ep_addr & 0x7F];
+ if(USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001;
+ }
+ else
+ {
+ pep->status = 0x0000;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pep->status,
+ 2);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len;
+ uint8_t *pbuf;
+
+
+ switch (req->wValue >> 8)
+ {
+#if (USBD_LPM_ENABLED == 1)
+ case USB_DESC_TYPE_BOS:
+ pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
+ break;
+#endif
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ switch ((uint8_t)(req->wValue))
+ {
+ case USBD_IDX_LANGID_STR:
+ pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_MFC_STR:
+ pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_PRODUCT_STR:
+ pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_SERIAL_STR:
+ pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_CONFIG_STR:
+ pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_INTERFACE_STR:
+ pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ default:
+#if (USBD_SUPPORT_USER_STRING == 1)
+ pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len);
+ break;
+#else
+ USBD_CtlError(pdev , req);
+ return;
+#endif
+ }
+ break;
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len);
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ default:
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ if((len != 0)&& (req->wLength != 0))
+ {
+
+ len = MIN(len , req->wLength);
+
+ USBD_CtlSendData (pdev,
+ pbuf,
+ len);
+ }
+
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0) && (req->wLength == 0))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7F;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ static uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev , cfgidx);
+ USBD_CtlSendStatus(pdev);
+
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev , pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wLength != 1)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state )
+ {
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0;
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_default_config,
+ 1);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_config,
+ 1);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+#if ( USBD_SELF_POWERED == 1)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)& pdev->dev_config_status,
+ 2);
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *) (pdata);
+ req->bRequest = *(uint8_t *) (pdata + 1);
+ req->wValue = SWAPBYTE (pdata + 2);
+ req->wIndex = SWAPBYTE (pdata + 4);
+ req->wLength = SWAPBYTE (pdata + 6);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError( USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev , 0x80);
+ USBD_LL_StallEP(pdev , 0);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0;
+
+ if (desc != NULL)
+ {
+ *len = USBD_GetLen(desc) * 2 + 2;
+ unicode[idx++] = *len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0x00;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
new file mode 100644
index 00000000..d66d777d
--- /dev/null
+++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
@@ -0,0 +1,236 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+ return USBD_OK;
+}
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
+{
+
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, NULL, 0);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive ( pdev,
+ 0,
+ NULL,
+ 0);
+
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: device instance
+* @param ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Middlewares/Third_Party/FreeRTOS/Source/include/task.h b/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
index 448e3ebc..b8d6dd89 100644
--- a/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
+++ b/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
@@ -1931,7 +1931,7 @@ BaseType_t xTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, cons
* Sets the pointer to the current TCB to the TCB of the highest priority task
* that is ready to run.
*/
-void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION __attribute__((used));
+void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;
/*
* THESE FUNCTIONS MUST NOT BE USED FROM APPLICATION CODE. THEY ARE USED BY
diff --git a/MotorControl/low_level.c b/MotorControl/low_level.c
index a0321cc6..88d8df2b 100644
--- a/MotorControl/low_level.c
+++ b/MotorControl/low_level.c
@@ -166,17 +166,20 @@ void set_pos_setpoint(Motor_t* motor, float pos_setpoint, float vel_feed_forward
motor->vel_setpoint = vel_feed_forward;
motor->current_setpoint = current_feed_forward;
motor->control_mode = POSITION_CONTROL;
+ printf("POSITION_CONTROL %3.3f %3.3f %3.3f\n", motor->pos_setpoint, motor->vel_setpoint, motor->current_setpoint);
}
void set_vel_setpoint(Motor_t* motor, float vel_setpoint, float current_feed_forward) {
motor->vel_setpoint = vel_setpoint;
motor->current_setpoint = current_feed_forward;
motor->control_mode = VELOCITY_CONTROL;
+ printf("VELOCITY_CONTROL %3.3f %3.3f\n", motor->vel_setpoint, motor->current_setpoint);
}
void set_current_setpoint(Motor_t* motor, float current_setpoint) {
motor->current_setpoint = current_setpoint;
motor->control_mode = CURRENT_CONTROL;
+ printf("CURRENT_CONTROL %3.3f\n", motor->current_setpoint);
}
// Initalises the low level motor control and then starts the motor control threads
diff --git a/Odrive.ioc b/Odrive.ioc
index 4ce36fe3..5522ac64 100755
--- a/Odrive.ioc
+++ b/Odrive.ioc
@@ -90,6 +90,8 @@ Mcu.IP10=TIM2
Mcu.IP11=TIM3
Mcu.IP12=TIM4
Mcu.IP13=TIM8
+Mcu.IP14=USB_DEVICE
+Mcu.IP15=USB_OTG_FS
Mcu.IP2=ADC3
Mcu.IP3=CAN1
Mcu.IP4=FREERTOS
@@ -98,7 +100,7 @@ Mcu.IP6=RCC
Mcu.IP7=SPI3
Mcu.IP8=SYS
Mcu.IP9=TIM1
-Mcu.IPNb=14
+Mcu.IPNb=16
Mcu.Name=STM32F405RGTx
Mcu.Package=LQFP64
Mcu.Pin0=PC13-ANTI_TAMP
@@ -130,28 +132,31 @@ Mcu.Pin31=PC9
Mcu.Pin32=PA8
Mcu.Pin33=PA9
Mcu.Pin34=PA10
-Mcu.Pin35=PA13
-Mcu.Pin36=PA14
-Mcu.Pin37=PA15
-Mcu.Pin38=PC10
-Mcu.Pin39=PC11
+Mcu.Pin35=PA11
+Mcu.Pin36=PA12
+Mcu.Pin37=PA13
+Mcu.Pin38=PA14
+Mcu.Pin39=PA15
Mcu.Pin4=PH1-OSC_OUT
-Mcu.Pin40=PC12
-Mcu.Pin41=PD2
-Mcu.Pin42=PB3
-Mcu.Pin43=PB4
-Mcu.Pin44=PB5
-Mcu.Pin45=PB6
-Mcu.Pin46=PB7
-Mcu.Pin47=PB8
-Mcu.Pin48=PB9
-Mcu.Pin49=VP_FREERTOS_VS_ENABLE
+Mcu.Pin40=PC10
+Mcu.Pin41=PC11
+Mcu.Pin42=PC12
+Mcu.Pin43=PD2
+Mcu.Pin44=PB3
+Mcu.Pin45=PB4
+Mcu.Pin46=PB5
+Mcu.Pin47=PB6
+Mcu.Pin48=PB7
+Mcu.Pin49=PB8
Mcu.Pin5=PC0
-Mcu.Pin50=VP_SYS_VS_Systick
-Mcu.Pin51=VP_TIM1_VS_ClockSourceINT
-Mcu.Pin52=VP_TIM1_VS_no_output4
-Mcu.Pin53=VP_TIM8_VS_ClockSourceINT
-Mcu.Pin54=VP_TIM8_VS_no_output4
+Mcu.Pin50=PB9
+Mcu.Pin51=VP_FREERTOS_VS_ENABLE
+Mcu.Pin52=VP_SYS_VS_Systick
+Mcu.Pin53=VP_TIM1_VS_ClockSourceINT
+Mcu.Pin54=VP_TIM1_VS_no_output4
+Mcu.Pin55=VP_TIM8_VS_ClockSourceINT
+Mcu.Pin56=VP_TIM8_VS_no_output4
+Mcu.Pin57=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
Mcu.Pin6=PC1
Mcu.Pin7=PC2
Mcu.Pin8=PC3
@@ -167,6 +172,7 @@ NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.OTG_FS_IRQn=true\:5\:0\:false\:false\:true\:true
NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false
@@ -182,6 +188,10 @@ PA10.GPIOParameters=GPIO_Label
PA10.GPIO_Label=M0_CH
PA10.Locked=true
PA10.Signal=S_TIM1_CH3
+PA11.Mode=Device_Only
+PA11.Signal=USB_OTG_FS_DM
+PA12.Mode=Device_Only
+PA12.Signal=USB_OTG_FS_DP
PA13.Mode=Serial_Wire
PA13.Signal=SYS_JTMS-SWDIO
PA14.Mode=Serial_Wire
@@ -375,7 +385,7 @@ ProjectManager.StackSize=0x800
ProjectManager.TargetToolchain=SW4STM32
ProjectManager.ToolChainLocation=/home/oskar/ODriveFirmware
ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-MX_ADC1_Init-ADC1-false-HAL,3-MX_ADC2_Init-ADC2-false-HAL,4-MX_CAN1_Init-CAN1-false-HAL,5-MX_TIM1_Init-TIM1-false-HAL,6-MX_TIM8_Init-TIM8-false-HAL,7-MX_TIM3_Init-TIM3-false-HAL,8-MX_TIM4_Init-TIM4-false-HAL,9-MX_SPI3_Init-SPI3-false-HAL,10-MX_ADC3_Init-ADC3-false-HAL,11-SystemClock_Config-RCC-false-HAL,12-MX_TIM2_Init-TIM2-false-HAL
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-MX_ADC1_Init-ADC1-false-HAL,3-MX_ADC2_Init-ADC2-false-HAL,4-MX_CAN1_Init-CAN1-false-HAL,5-MX_TIM1_Init-TIM1-false-HAL,6-MX_TIM8_Init-TIM8-false-HAL,7-MX_TIM3_Init-TIM3-false-HAL,8-MX_TIM4_Init-TIM4-false-HAL,9-MX_SPI3_Init-SPI3-false-HAL,10-MX_ADC3_Init-ADC3-false-HAL,11-SystemClock_Config-RCC-false-HAL,12-MX_TIM2_Init-TIM2-false-HAL,13-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL
RCC.48MHZClocksFreq_Value=48000000
RCC.AHBFreq_Value=168000000
RCC.APB1CLKDivider=RCC_HCLK_DIV4
@@ -394,7 +404,7 @@ RCC.HCLKFreq_Value=168000000
RCC.HSE_VALUE=8000000
RCC.HSI_VALUE=16000000
RCC.I2SClocksFreq_Value=192000000
-RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimCLKDivider,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimCLKDivider,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSE_VALUE,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,PLLSourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
+RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimCLKDivider,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimCLKDivider,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSE_VALUE,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
RCC.LSE_VALUE=32768
RCC.LSI_VALUE=32000
RCC.MCO2PinFreq_Value=168000000
@@ -538,6 +548,20 @@ TIM8.OffStateIDLEMode=TIM_OSSI_ENABLE
TIM8.OffStateRunMode=TIM_OSSR_ENABLE
TIM8.Period=TIM_1_8_PERIOD_CLOCKS
TIM8.TIM_MasterOutputTrigger=TIM_TRGO_UPDATE
+USB_DEVICE.CLASS_NAME-CDC_FS=CDC
+USB_DEVICE.CLASS_NAME_FS=CDC
+USB_DEVICE.IPParameters=VirtualMode-CDC_FS,VirtualModeFS,USBD_HandleTypeDef-CDC_FS,CLASS_NAME-CDC_FS,CLASS_NAME_FS,MANUFACTURER_STRING-CDC_FS,PRODUCT_STRING_CDC_FS,VID-CDC_FS,PID_CDC_FS,SERIALNUMBER_STRING_CDC_FS
+USB_DEVICE.MANUFACTURER_STRING-CDC_FS=ODrive
+USB_DEVICE.PID_CDC_FS=0x0D31
+USB_DEVICE.PRODUCT_STRING_CDC_FS=ODrive rev 3.1
+USB_DEVICE.SERIALNUMBER_STRING_CDC_FS=000000000001
+USB_DEVICE.USBD_HandleTypeDef-CDC_FS=hUsbDeviceFS
+USB_DEVICE.VID-CDC_FS=0x1209
+USB_DEVICE.VirtualMode-CDC_FS=Cdc
+USB_DEVICE.VirtualModeFS=Cdc_FS
+USB_OTG_FS.IPParameters=VirtualMode,vbus_sensing_enable
+USB_OTG_FS.VirtualMode=Device_Only
+USB_OTG_FS.vbus_sensing_enable=DISABLE
VP_FREERTOS_VS_ENABLE.Mode=Enabled
VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
VP_SYS_VS_Systick.Mode=SysTick
@@ -550,4 +574,6 @@ VP_TIM8_VS_ClockSourceINT.Mode=Internal
VP_TIM8_VS_ClockSourceINT.Signal=TIM8_VS_ClockSourceINT
VP_TIM8_VS_no_output4.Mode=Output Compare4 No Output
VP_TIM8_VS_no_output4.Signal=TIM8_VS_no_output4
+VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
+VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
board=Odrive
diff --git a/Src/freertos.c b/Src/freertos.c
index bf9db5d6..117349f7 100644
--- a/Src/freertos.c
+++ b/Src/freertos.c
@@ -48,6 +48,7 @@
/* USER CODE BEGIN Includes */
#include "low_level.h"
+#include "version.h"
/* USER CODE END Includes */
/* Variables -----------------------------------------------------------------*/
@@ -63,10 +64,13 @@ osThreadDef(task_motor_1, motor_thread, osPriorityHigh, 0, 512);
/* Function prototypes -------------------------------------------------------*/
void StartDefaultTask(void const * argument);
+extern void MX_USB_DEVICE_Init(void);
void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
/* USER CODE BEGIN FunctionPrototypes */
+void usb_cdc_thread(void const * argument);
+
/* USER CODE END FunctionPrototypes */
/* Hook prototypes */
@@ -107,6 +111,8 @@ void MX_FREERTOS_Init(void) {
/* StartDefaultTask function */
void StartDefaultTask(void const * argument)
{
+ /* init code for USB_DEVICE */
+ MX_USB_DEVICE_Init();
/* USER CODE BEGIN StartDefaultTask */
@@ -117,6 +123,10 @@ void StartDefaultTask(void const * argument)
osThreadCreate(osThread(task_motor_0), &motors[0]);
osThreadCreate(osThread(task_motor_1), &motors[1]);
+ // Start USB CDC thread
+ osThreadDef(task_usb_cdc, usb_cdc_thread, osPriorityIdle, 0, 256);
+ osThreadCreate(osThread(task_usb_cdc), NULL);
+
//If we get to here, then the default task is done.
vTaskDelete(defaultTaskHandle);
@@ -125,6 +135,22 @@ void StartDefaultTask(void const * argument)
/* USER CODE BEGIN Application */
+void usb_cdc_thread(void const * argument) {
+
+ // Wait some time for USB CDC connection and print version
+ osDelay(5000);
+ printf("ODrive Firmware v%d.%d.%d\n", ODRIVE_FW_VERSION_MAJOR, ODRIVE_FW_VERSION_MINOR, ODRIVE_FW_VERSION_PATCH);
+
+ for(;;) {
+ // Periodically print SysTick information
+ printf("osKernelSysTick: %d\n", osKernelSysTick());
+ osDelay(1000);
+ }
+
+ // If we get here, then this task is done
+ vTaskDelete(osThreadGetId());
+}
+
/* USER CODE END Application */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Src/main.c b/Src/main.c
index 344064e0..5e854c47 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -48,6 +48,7 @@
#include "can.h"
#include "spi.h"
#include "tim.h"
+#include "usb_device.h"
#include "gpio.h"
/* USER CODE BEGIN Includes */
diff --git a/Src/stm32f4xx_it.c b/Src/stm32f4xx_it.c
index 4c6595e0..00f73c84 100644
--- a/Src/stm32f4xx_it.c
+++ b/Src/stm32f4xx_it.c
@@ -45,6 +45,7 @@ void ADC_IRQ_Dispatch(ADC_HandleTypeDef* hadc, ADC_handler_t callback);
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
+extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
extern ADC_HandleTypeDef hadc1;
extern ADC_HandleTypeDef hadc2;
extern ADC_HandleTypeDef hadc3;
@@ -191,6 +192,20 @@ void ADC_IRQHandler(void)
/* USER CODE END ADC_IRQn 1 */
}
+/**
+* @brief This function handles USB On The Go FS global interrupt.
+*/
+void OTG_FS_IRQHandler(void)
+{
+ /* USER CODE BEGIN OTG_FS_IRQn 0 */
+
+ /* USER CODE END OTG_FS_IRQn 0 */
+ HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
+ /* USER CODE BEGIN OTG_FS_IRQn 1 */
+
+ /* USER CODE END OTG_FS_IRQn 1 */
+}
+
/* USER CODE BEGIN 1 */
void ADC_IRQ_Dispatch(ADC_HandleTypeDef* hadc, ADC_handler_t callback) {
diff --git a/Src/syscalls.c b/Src/syscalls.c
new file mode 100644
index 00000000..9a6f0517
--- /dev/null
+++ b/Src/syscalls.c
@@ -0,0 +1,24 @@
+/**
+ ******************************************************************************
+ * @file : syscalls.c
+ * @brief : This file implements printf functionality
+ ******************************************************************************
+*/
+
+#include
+#include "usbd_cdc_if.h"
+
+//int _read(int file, char *data, int len) {}
+//int _close(int file) {}
+//int _lseek(int file, int ptr, int dir) {}
+//int _fstat(int file, struct stat *st) {}
+//int _isatty(int file) {}
+
+int _write(int file, char *data, int len) {
+
+ // transmit over CDC
+ uint8_t status = CDC_Transmit_FS(data, len);
+
+ // return number of bytes written
+ return (status == USBD_OK ? len : 0);
+}
diff --git a/Src/usb_device.c b/Src/usb_device.c
new file mode 100644
index 00000000..d8fb706d
--- /dev/null
+++ b/Src/usb_device.c
@@ -0,0 +1,77 @@
+/**
+ ******************************************************************************
+ * @file : USB_DEVICE
+ * @version : v1.0_Cube
+ * @brief : This file implements the USB Device
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "usb_device.h"
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_cdc.h"
+#include "usbd_cdc_if.h"
+
+/* USB Device Core handle declaration */
+USBD_HandleTypeDef hUsbDeviceFS;
+
+/* init function */
+void MX_USB_DEVICE_Init(void)
+{
+ /* Init Device Library,Add Supported Class and Start the library*/
+ USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
+
+ USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC);
+
+ USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS);
+
+ USBD_Start(&hUsbDeviceFS);
+
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Src/usbd_cdc_if.c b/Src/usbd_cdc_if.c
new file mode 100644
index 00000000..65044d9e
--- /dev/null
+++ b/Src/usbd_cdc_if.c
@@ -0,0 +1,334 @@
+/**
+ ******************************************************************************
+ * @file : usbd_cdc_if.c
+ * @brief :
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc_if.h"
+/* USER CODE BEGIN INCLUDE */
+#include "low_level.h"
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CDC
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_CDC_Private_TypesDefinitions
+ * @{
+ */
+/* USER CODE BEGIN PRIVATE_TYPES */
+/* USER CODE END PRIVATE_TYPES */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Defines
+ * @{
+ */
+/* USER CODE BEGIN PRIVATE_DEFINES */
+/* Define size for the receive and transmit buffer over CDC */
+/* It's up to user to redefine and/or remove those define */
+#define APP_RX_DATA_SIZE 4
+#define APP_TX_DATA_SIZE 4
+/* USER CODE END PRIVATE_DEFINES */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Macros
+ * @{
+ */
+/* USER CODE BEGIN PRIVATE_MACRO */
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Variables
+ * @{
+ */
+/* Create buffer for reception and transmission */
+/* It's up to user to redefine and/or remove those define */
+/* Received Data over USB are stored in this buffer */
+uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
+
+/* Send Data over USB CDC are stored in this buffer */
+uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
+
+/* USER CODE BEGIN PRIVATE_VARIABLES */
+/* USER CODE END PRIVATE_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Variables
+ * @{
+ */
+ extern USBD_HandleTypeDef hUsbDeviceFS;
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_FunctionPrototypes
+ * @{
+ */
+static int8_t CDC_Init_FS (void);
+static int8_t CDC_DeInit_FS (void);
+static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length);
+static int8_t CDC_Receive_FS (uint8_t* pbuf, uint32_t *Len);
+
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
+/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
+
+/**
+ * @}
+ */
+
+USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
+{
+ CDC_Init_FS,
+ CDC_DeInit_FS,
+ CDC_Control_FS,
+ CDC_Receive_FS
+};
+
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief CDC_Init_FS
+ * Initializes the CDC media low layer over the FS USB IP
+ * @param None
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_Init_FS(void)
+{
+ /* USER CODE BEGIN 3 */
+ /* Set Application Buffers */
+ USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
+ USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
+ return (USBD_OK);
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief CDC_DeInit_FS
+ * DeInitializes the CDC media low layer
+ * @param None
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_DeInit_FS(void)
+{
+ /* USER CODE BEGIN 4 */
+ return (USBD_OK);
+ /* USER CODE END 4 */
+}
+
+/**
+ * @brief CDC_Control_FS
+ * Manage the CDC class requests
+ * @param cmd: Command code
+ * @param pbuf: Buffer containing command data (request parameters)
+ * @param length: Number of data to be sent (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length)
+{
+ /* USER CODE BEGIN 5 */
+ switch (cmd)
+ {
+ case CDC_SEND_ENCAPSULATED_COMMAND:
+
+ break;
+
+ case CDC_GET_ENCAPSULATED_RESPONSE:
+
+ break;
+
+ case CDC_SET_COMM_FEATURE:
+
+ break;
+
+ case CDC_GET_COMM_FEATURE:
+
+ break;
+
+ case CDC_CLEAR_COMM_FEATURE:
+
+ break;
+
+ /*******************************************************************************/
+ /* Line Coding Structure */
+ /*-----------------------------------------------------------------------------*/
+ /* Offset | Field | Size | Value | Description */
+ /* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
+ /* 4 | bCharFormat | 1 | Number | Stop bits */
+ /* 0 - 1 Stop bit */
+ /* 1 - 1.5 Stop bits */
+ /* 2 - 2 Stop bits */
+ /* 5 | bParityType | 1 | Number | Parity */
+ /* 0 - None */
+ /* 1 - Odd */
+ /* 2 - Even */
+ /* 3 - Mark */
+ /* 4 - Space */
+ /* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
+ /*******************************************************************************/
+ case CDC_SET_LINE_CODING:
+
+ break;
+
+ case CDC_GET_LINE_CODING:
+
+ break;
+
+ case CDC_SET_CONTROL_LINE_STATE:
+
+ break;
+
+ case CDC_SEND_BREAK:
+
+ break;
+
+ default:
+ break;
+ }
+
+ return (USBD_OK);
+ /* USER CODE END 5 */
+}
+
+/**
+ * @brief CDC_Receive_FS
+ * Data received over USB OUT endpoint are sent over CDC interface
+ * through this function.
+ *
+ * @note
+ * This function will block any OUT packet reception on USB endpoint
+ * untill exiting this function. If you exit this function before transfer
+ * is complete on CDC interface (ie. using DMA controller) it will result
+ * in receiving more data while previous ones are still not sent.
+ *
+ * @param Buf: Buffer of data to be received
+ * @param Len: Number of data received (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_Receive_FS (uint8_t* Buf, uint32_t *Len)
+{
+ /* USER CODE BEGIN 6 */
+ USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
+ USBD_CDC_ReceivePacket(&hUsbDeviceFS);
+ // check incoming packet type
+ if (Buf[0] == 'p') {
+ // position control
+ uint8_t motor_number;
+ float pos_setpoint, vel_feed_forward, current_feed_forward;
+ sscanf(Buf, "p %u %f %f %f", &motor_number, &pos_setpoint, &vel_feed_forward, ¤t_feed_forward);
+ if (motor_number < num_motors) {
+ set_pos_setpoint(&motors[motor_number], pos_setpoint, vel_feed_forward, current_feed_forward);
+ }
+ } else if (Buf[0] == 'v') {
+ // velocity control
+ uint8_t motor_number;
+ float vel_feed_forward, current_feed_forward;
+ sscanf(Buf, "v %u %f %f", &motor_number, &vel_feed_forward, ¤t_feed_forward);
+ if (motor_number < num_motors) {
+ set_vel_setpoint(&motors[motor_number], vel_feed_forward, current_feed_forward);
+ }
+ } else if (Buf[0] == 'c') {
+ // velocity control
+ uint8_t motor_number;
+ float current_feed_forward;
+ sscanf(Buf, "c %u %f ", &motor_number, ¤t_feed_forward);
+ if (motor_number < num_motors) {
+ set_current_setpoint(&motors[motor_number], current_feed_forward);
+ }
+ }
+ return (USBD_OK);
+ /* USER CODE END 6 */
+}
+
+/**
+ * @brief CDC_Transmit_FS
+ * Data send over USB IN endpoint are sent over CDC interface
+ * through this function.
+ * @note
+ *
+ *
+ * @param Buf: Buffer of data to be send
+ * @param Len: Number of data to be send (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
+ */
+uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
+{
+ uint8_t result = USBD_OK;
+ /* USER CODE BEGIN 7 */
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
+ if (hcdc->TxState != 0){
+ return USBD_BUSY;
+ }
+ USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
+ result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
+ /* USER CODE END 7 */
+ return result;
+}
+
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
+/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Src/usbd_conf.c b/Src/usbd_conf.c
new file mode 100644
index 00000000..4d6d9972
--- /dev/null
+++ b/Src/usbd_conf.c
@@ -0,0 +1,544 @@
+/**
+ ******************************************************************************
+ * @file : usbd_conf.c
+ * @version : v1.0_Cube
+ * @brief : This file implements the board support package for the USB device library
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal.h"
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+PCD_HandleTypeDef hpcd_USB_OTG_FS;
+void Error_Handler(void);
+
+/* External functions --------------------------------------------------------*/
+void SystemClock_Config(void);
+
+/* USER CODE BEGIN 0 */
+/* USER CODE END 0 */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+/* USER CODE END 1 */
+
+/*******************************************************************************
+ LL Driver Callbacks (PCD -> USB Device Library)
+*******************************************************************************/
+/* MSP Init */
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ if(pcdHandle->Instance==USB_OTG_FS)
+ {
+ /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
+
+ /* USER CODE END USB_OTG_FS_MspInit 0 */
+
+ /**USB_OTG_FS GPIO Configuration
+ PA11 ------> USB_OTG_FS_DM
+ PA12 ------> USB_OTG_FS_DP
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* Peripheral clock enable */
+ __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+
+ /* Peripheral interrupt init */
+ HAL_NVIC_SetPriority(OTG_FS_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
+ /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
+
+ /* USER CODE END USB_OTG_FS_MspInit 1 */
+ }
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB_OTG_FS)
+ {
+ /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
+
+ /* USER CODE END USB_OTG_FS_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
+
+ /**USB_OTG_FS GPIO Configuration
+ PA11 ------> USB_OTG_FS_DM
+ PA12 ------> USB_OTG_FS_DP
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
+
+ /* Peripheral interrupt Deinit*/
+ HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
+
+ /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
+
+ /* USER CODE END USB_OTG_FS_MspDeInit 1 */
+ }
+}
+
+/**
+ * @brief Setup stage callback
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SetupStage(hpcd->pData, (uint8_t *)hpcd->Setup);
+}
+
+/**
+ * @brief Data Out stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataOutStage(hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief Data In stage callback..
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataInStage(hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief SOF callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SOF(hpcd->pData);
+}
+
+/**
+ * @brief Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
+
+ /*Set USB Current Speed*/
+ switch (hpcd->Init.speed)
+ {
+ case PCD_SPEED_HIGH:
+ speed = USBD_SPEED_HIGH;
+ break;
+ case PCD_SPEED_FULL:
+ speed = USBD_SPEED_FULL;
+ break;
+
+ default:
+ speed = USBD_SPEED_FULL;
+ break;
+ }
+ USBD_LL_SetSpeed(hpcd->pData, speed);
+
+ /*Reset Device*/
+ USBD_LL_Reset(hpcd->pData);
+}
+
+/**
+ * @brief Suspend callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Inform USB library that core enters in suspend Mode */
+ USBD_LL_Suspend(hpcd->pData);
+ __HAL_PCD_GATE_PHYCLOCK(hpcd);
+ /*Enter in STOP mode */
+ /* USER CODE BEGIN 2 */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ /* USER CODE END 2 */
+}
+
+/**
+ * @brief Resume callback.
+ When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* USER CODE BEGIN 3 */
+ /* USER CODE END 3 */
+ USBD_LL_Resume(hpcd->pData);
+}
+
+/**
+ * @brief ISOC Out Incomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoOUTIncomplete(hpcd->pData, epnum);
+}
+
+/**
+ * @brief ISOC In Incomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoINIncomplete(hpcd->pData, epnum);
+}
+
+/**
+ * @brief Connect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevConnected(hpcd->pData);
+}
+
+/**
+ * @brief Disconnect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevDisconnected(hpcd->pData);
+}
+
+/*******************************************************************************
+ LL Driver Interface (USB Device Library --> PCD)
+*******************************************************************************/
+/**
+ * @brief Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev)
+{
+ /* Init USB_IP */
+ if (pdev->id == DEVICE_FS) {
+ /* Link The driver to the stack */
+ hpcd_USB_OTG_FS.pData = pdev;
+ pdev->pData = &hpcd_USB_OTG_FS;
+
+ hpcd_USB_OTG_FS.Instance = USB_OTG_FS;
+ hpcd_USB_OTG_FS.Init.dev_endpoints = 4;
+ hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_OTG_FS.Init.dma_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.ep0_mps = DEP0CTL_MPS_64;
+ hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
+ hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE;
+ if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);
+ HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x40);
+ HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x80);
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev)
+{
+ HAL_PCD_DeInit(pdev->pData);
+ return USBD_OK;
+}
+
+/**
+ * @brief Starts the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ HAL_PCD_Start(pdev->pData);
+ return USBD_OK;
+}
+
+/**
+ * @brief Stops the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev)
+{
+ HAL_PCD_Stop(pdev->pData);
+ return USBD_OK;
+}
+
+/**
+ * @brief Opens an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param ep_type: Endpoint Type
+ * @param ep_mps: Endpoint Max Packet Size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps)
+{
+
+ HAL_PCD_EP_Open(pdev->pData,
+ ep_addr,
+ ep_mps,
+ ep_type);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief Closes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_Close(pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_Flush(pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ PCD_HandleTypeDef *hpcd = pdev->pData;
+
+ if((ep_addr & 0x80) == 0x80)
+ {
+ return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
+ }
+ else
+ {
+ return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
+ }
+}
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+
+ HAL_PCD_SetAddress(pdev->pData, dev_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+
+ HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
+ return USBD_OK;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+
+ HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns the last transfered packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return HAL_PCD_EP_GetRxCount(pdev->pData, ep_addr);
+}
+
+#if (USBD_LPM_ENABLED == 1)
+/**
+ * @brief HAL_PCDEx_LPM_Callback : Send LPM message to user layer
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ switch ( msg)
+ {
+ case PCD_LPM_L0_ACTIVE:
+ if (hpcd->Init.low_power_enable)
+ {
+ SystemClock_Config();
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ __HAL_PCD_UNGATE_PHYCLOCK(hpcd);
+ USBD_LL_Resume(hpcd->pData);
+ break;
+
+ case PCD_LPM_L1_ACTIVE:
+ __HAL_PCD_GATE_PHYCLOCK(hpcd);
+ USBD_LL_Suspend(hpcd->pData);
+
+ /*Enter in STOP mode */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ break;
+ }
+}
+#endif
+/**
+ * @brief Delays routine for the USB Device Library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay (uint32_t Delay)
+{
+ HAL_Delay(Delay);
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Src/usbd_desc.c b/Src/usbd_desc.c
new file mode 100644
index 00000000..4dfb1d85
--- /dev/null
+++ b/Src/usbd_desc.c
@@ -0,0 +1,358 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.c
+ * @version : v1.0_Cube
+ * @brief : This file implements the USB Device descriptors
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_DESC
+ * @brief USBD descriptors module
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Defines
+ * @{
+ */
+#define USBD_VID 0x1209
+#define USBD_LANGID_STRING 1033
+#define USBD_MANUFACTURER_STRING "ODrive"
+#define USBD_PID_FS 0x0D31
+#define USBD_PRODUCT_STRING_FS "ODrive rev 3.1"
+#define USBD_SERIALNUMBER_STRING_FS "000000000001"
+#define USBD_CONFIGURATION_STRING_FS "CDC Config"
+#define USBD_INTERFACE_STRING_FS "CDC Interface"
+
+#define USB_SIZ_BOS_DESC 0x0C
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0*/
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables
+ * @{
+ */
+uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_ManufacturerStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_ProductStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_FS_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx , uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+#if (USBD_LPM_ENABLED == 1)
+uint8_t *USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+
+USBD_DescriptorsTypeDef FS_Desc =
+{
+ USBD_FS_DeviceDescriptor,
+ USBD_FS_LangIDStrDescriptor,
+ USBD_FS_ManufacturerStrDescriptor,
+ USBD_FS_ProductStrDescriptor,
+ USBD_FS_SerialStrDescriptor,
+ USBD_FS_ConfigStrDescriptor,
+ USBD_FS_InterfaceStrDescriptor,
+#if (USBD_LPM_ENABLED == 1)
+ USBD_FS_USR_BOSDescriptor,
+#endif
+};
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
+ {
+ 0x12, /*bLength */
+ USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
+#if (USBD_LPM_ENABLED == 1)
+ 0x01, /*bcdUSB */ /* changed to USB version 2.01
+ in order to support LPM L1 suspend
+ resume test of USBCV3.0*/
+#else
+ 0x00, /* bcdUSB */
+#endif
+ 0x02,
+ 0x02, /*bDeviceClass*/
+ 0x02, /*bDeviceSubClass*/
+ 0x00, /*bDeviceProtocol*/
+ USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
+ LOBYTE(USBD_VID), /*idVendor*/
+ HIBYTE(USBD_VID), /*idVendor*/
+ LOBYTE(USBD_PID_FS), /*idVendor*/
+ HIBYTE(USBD_PID_FS), /*idVendor*/
+ 0x00, /*bcdDevice rel. 2.00*/
+ 0x02,
+ USBD_IDX_MFC_STR, /*Index of manufacturer string*/
+ USBD_IDX_PRODUCT_STR, /*Index of product string*/
+ USBD_IDX_SERIAL_STR, /*Index of serial number string*/
+ USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
+ } ;
+/* USB_DeviceDescriptor */
+/* BOS descriptor */
+#if (USBD_LPM_ENABLED == 1)
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_FS_BOSDesc[USB_SIZ_BOS_DESC] __ALIGN_END =
+{
+ 0x5,
+ USB_DESC_TYPE_BOS,
+ 0xC,
+ 0x0,
+ 0x1, /* 1 device capability */
+ /* device capability*/
+ 0x7,
+ USB_DEVICE_CAPABITY_TYPE,
+ 0x2,
+ 0x2, /*LPM capability bit set */
+ 0x0,
+ 0x0,
+ 0x0
+};
+#endif
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
+{
+ USB_LEN_LANGID_STR_DESC,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING),
+};
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_FS_DeviceDescriptor
+* return the device descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ *length = sizeof(USBD_FS_DeviceDesc);
+ return USBD_FS_DeviceDesc;
+}
+
+/**
+* @brief USBD_FS_LangIDStrDescriptor
+* return the LangID string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return USBD_LangIDDesc;
+}
+
+/**
+* @brief USBD_FS_ProductStrDescriptor
+* return the product string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_ProductStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_FS_ManufacturerStrDescriptor
+* return the manufacturer string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_ManufacturerStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ USBD_GetString (USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_FS_SerialStrDescriptor
+* return the serial number string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString (USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString (USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_FS_ConfigStrDescriptor
+* return the configuration string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_HS_InterfaceStrDescriptor
+* return the interface string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+#if (USBD_LPM_ENABLED == 1)
+/**
+ * @brief USBD_FS_USR_BOSDescriptor
+ * return the BOS descriptor
+ * @param speed : current device speed
+ * @param length : pointer to data length variable
+ * @retval pointer to descriptor buffer
+ */
+uint8_t *USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ *length = sizeof(USBD_FS_BOSDesc);
+ return (uint8_t*)USBD_FS_BOSDesc;
+}
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/tools/.gitignore b/tools/.gitignore
new file mode 100644
index 00000000..9886e1ed
--- /dev/null
+++ b/tools/.gitignore
@@ -0,0 +1 @@
+*.py[cod]
diff --git a/tools/odrive/__init__.py b/tools/odrive/__init__.py
new file mode 100644
index 00000000..e69de29b
diff --git a/tools/odrive/usbbulk.py b/tools/odrive/usbbulk.py
new file mode 100644
index 00000000..7a48cd2e
--- /dev/null
+++ b/tools/odrive/usbbulk.py
@@ -0,0 +1,120 @@
+# requires pyusb
+# pip install --pre pyusb
+
+import usb.core
+import usb.util
+import sys
+import time
+
+from odrive.util import ODriveNotConnectedError
+from odrive.util import USBID_VID_ODRIVE, USBID_PID_ODRIVE
+
+BULK_DEVICE_NOT_FOUND = 'ODrive BulkDevice Not Found'
+BULK_DEVICE_FOUND = 'ODrive BulkDevice Found!'
+
+def noprint(x):
+ pass
+
+def poll_odrive_bulk_device(intv=1, printer=noprint):
+ # look for device
+ while 1:
+ time.sleep(intv)
+ try:
+ dev = ODriveBulkDevice()
+ break
+ except:
+ printer(BULK_DEVICE_NOT_FOUND)
+ # found device
+ printer(BULK_DEVICE_FOUND)
+ return dev
+
+class ODriveBulkDevice():
+ def __init__(self, idVendor=None, idProduct=None):
+ # ODrive idVendor
+ if idVendor is None:
+ idVendor = USBID_VID_ODRIVE
+ # ODrive idProduct
+ if idProduct is None:
+ idProduct = USBID_PID_ODRIVE
+ # find our device
+ self.dev = usb.core.find(idVendor=idVendor, idProduct=idProduct)
+ # was it found?
+ if self.dev is None:
+ raise ODriveNotConnectedError()
+
+ ##
+ # information about the connected device
+ ##
+ def info(self):
+ # loop through configurations
+ string = ""
+ for cfg in self.dev:
+ string += "ConfigurationValue {0}\n".format(cfg.bConfigurationValue)
+ for intf in cfg:
+ string += "\tInterfaceNumber {0},{0}\n".format(intf.bInterfaceNumber, intf.bAlternateSetting)
+ for ep in intf:
+ string += "\t\tEndpointAddress {0}\n".format(ep.bEndpointAddress)
+ return string
+
+ def init(self):
+ try:
+ string = ""
+ # detach kernel driver
+ if self.dev.is_kernel_driver_active(1):
+ self.dev.detach_kernel_driver(1)
+ string += "Detached Kernel Driver\n"
+ # set the active configuration. With no arguments, the first
+ # configuration will be the active one
+ self.dev.set_configuration()
+ # get an endpoint instance
+ self.cfg = self.dev.get_active_configuration()
+ self.intf = self.cfg[(1,0)]
+ # write endpoint
+ self.epw = usb.util.find_descriptor(self.intf,
+ # match the first OUT endpoint
+ custom_match = \
+ lambda e: \
+ usb.util.endpoint_direction(e.bEndpointAddress) == \
+ usb.util.ENDPOINT_OUT
+ )
+ assert self.epw is not None
+ string += "EndpointAddress for writing {}\n".format(self.epw.bEndpointAddress)
+ # read endpoint
+ self.epr = usb.util.find_descriptor(self.intf,
+ # match the first IN endpoint
+ custom_match = \
+ lambda e: \
+ usb.util.endpoint_direction(e.bEndpointAddress) == \
+ usb.util.ENDPOINT_IN
+ )
+ assert self.epr is not None
+ string += "EndpointAddress for reading {}\n".format(self.epr.bEndpointAddress)
+ return string
+ except usb.core.USBError:
+ #return -1
+ raise
+
+ def shutdown(self):
+ return 0
+
+ def send(self, usbBuffer):
+ try:
+ ret = self.epw.write(usbBuffer, 0)
+ return ret
+ except usb.core.USBError:
+ #return -1
+ raise
+
+ def recieve(self, bufferLen):
+ try:
+ ret = self.epr.read(bufferLen, 0)
+ return ret
+ except usb.core.USBError:
+ #return -1
+ raise
+
+ def send_max(self):
+ return 64
+
+ def recieve_max(self):
+ return 64
diff --git a/tools/odrive/util.py b/tools/odrive/util.py
new file mode 100644
index 00000000..e776f6c3
--- /dev/null
+++ b/tools/odrive/util.py
@@ -0,0 +1,44 @@
+# requires pyusb
+# pip install --pre pyusb
+
+import time
+import usb.core
+import usb.util
+
+# Exceptions
+class ODriveError(Exception):
+ pass
+
+class ODriveNotConnectedError(ODriveError):
+ pass
+
+# ODrive generic 1209:0D31
+USBID_VID_ODRIVE = 0x1209
+USBID_PID_ODRIVE = 0x0D31
+# ODrive rev 3.1 1209:0D31
+USBID_VID_ODRIVE_3_1 = USBID_VID_ODRIVE
+USBID_PID_ODRIVE_3_1 = USBID_PID_ODRIVE
+USB_DEV_ODRIVE_3_1 = (USBID_VID_ODRIVE_3_1, USBID_PID_ODRIVE_3_1)
+# all devices
+all_devices = [USB_DEV_ODRIVE_3_1]
+
+# device messages
+DEVICE_NOT_FOUND = 'ODrive Not Found'
+DEVICE_FOUND = 'ODrive Found!'
+
+def noprint(x):
+ pass
+
+def poll_odrive_device(devices=all_devices, intv=1, printer=noprint):
+ while 1:
+ time.sleep(intv)
+ for device in devices:
+ try:
+ idVendor = device[0]
+ idProduct = device[1]
+ dev = usb.core.find(idVendor=idVendor, idProduct=idProduct)
+ if dev is not None:
+ printer(DEVICE_FOUND)
+ return device
+ except:
+ printer(DEVICE_NOT_FOUND)
diff --git a/tools/test_bulk.py b/tools/test_bulk.py
new file mode 100644
index 00000000..9901d272
--- /dev/null
+++ b/tools/test_bulk.py
@@ -0,0 +1,51 @@
+#! /usr/bin/env python3
+
+import argparse
+
+def parse_args():
+ parser = argparse.ArgumentParser(description='Talk to a ODrive board over USB bulk channel.')
+ return parser.parse_args()
+
+if __name__ == '__main__':
+ # parse args before other imports
+ args = parse_args()
+
+import sys
+import time
+import threading
+from odrive import usbbulk
+
+running = True
+
+def main(args):
+ global running
+ print("ODrive USB Bulk Communications")
+ print("---------------------------------------------------------------------")
+ print("USAGE:")
+ print("\tPOSITION_CONTROL:\n\t\tp MOTOR_NUMBER POSITION VELOCITY CURRENT")
+ print("\tVELOCITY_CONTROL:\n\t\tv MOTOR_NUMBER VELOCITY CURRENT")
+ print("\tCURRENT_CONTROL:\n\t\tc MOTOR_NUMBER CURRENT")
+ print("---------------------------------------------------------------------")
+ # query device
+ dev = usbbulk.poll_odrive_bulk_device(printer=print)
+ print (dev.info())
+ print (dev.init())
+ # thread
+ thread = threading.Thread(target=recieve_thread, args=[dev])
+ thread.start()
+ while running:
+ try:
+ command = input("Enter ODrive command:\n")
+ print(command)
+ dev.send(command)
+ except:
+ running = False
+
+def recieve_thread(dev):
+ while running:
+ message = dev.recieve(dev.recieve_max())
+ print(bytes(message).decode('ascii'), end='')
+ time.sleep(1)
+
+if __name__ == "__main__":
+ main(args)