diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h new file mode 100644 index 00000000..ba2ed4f8 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h @@ -0,0 +1,794 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_uart.h + * @author MCD Application Team + * @version V1.7.1 + * @date 14-April-2017 + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_UART_H +#define __STM32F4xx_HAL_UART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 + Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UART_Word_Length */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). + This parameter can be a value of @ref UART_Over_Sampling */ +}UART_InitTypeDef; + +/** + * @brief HAL UART State structures definition + * @note HAL UART State value is a combination of 2 different substates: gState and RxState. + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP not initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (IP busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef enum +{ + HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ + HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ + HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing + Value is allowed for gState only */ + HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing + Value is allowed for RxState only */ + HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between gState and RxState values */ + HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state + Value is allowed for gState only */ + HAL_UART_STATE_ERROR = 0xE0U /*!< Error + Value is allowed for gState only */ +}HAL_UART_StateTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. + This parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +}UART_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported constants + * @{ + */ + +/** @defgroup UART_Error_Code UART Error Code + * @brief UART Error Code + * @{ + */ +#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */ +#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */ +#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */ +#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */ +#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */ +/** + * @} + */ + +/** @defgroup UART_Word_Length UART Word Length + * @{ + */ +#define UART_WORDLENGTH_8B 0x00000000U +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_1 0x00000000U +#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U +#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U +#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) +#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) +#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX ((uint32_t)USART_CR1_RE) +#define UART_MODE_TX ((uint32_t)USART_CR1_TE) +#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) +/** + * @} + */ + + /** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U +#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U +#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U +#define UART_LINBREAKDETECTLENGTH_11B 0x00000020U +/** + * @} + */ + +/** @defgroup UART_WakeUp_functions UART Wakeup Functions + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U +#define UART_WAKEUPMETHOD_ADDRESSMARK 0x00000800U +/** + * @} + */ + +/** @defgroup UART_Flags UART FLags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the SR register + * @{ + */ +#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) +#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) +#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) +#define UART_FLAG_TC ((uint32_t)USART_SR_TC) +#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) +#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) +#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) +#define UART_FLAG_NE ((uint32_t)USART_SR_NE) +#define UART_FLAG_FE ((uint32_t)USART_SR_FE) +#define UART_FLAG_PE ((uint32_t)USART_SR_PE) +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupt Definitions + * Elements values convention: 0xY000XXXX + * - XXXX : Interrupt mask (16 bits) in the Y register + * - Y : Interrupt source register (2bits) + * - 0001: CR1 register + * - 0010: CR2 register + * - 0011: CR3 register + * + * @{ + */ + +#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) +#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) +#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) +#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) +#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) + +#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE)) + +#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE)) +#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle gstate & RxState + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @retval None + */ +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) + +/** @brief Flushes the UART DR register + * @param __HANDLE__: specifies the UART Handle. + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) + +/** @brief Checks whether the specified UART flag is set or not. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg UART_FLAG_LBD: LIN Break detection flag + * @arg UART_FLAG_TXE: Transmit data register empty flag + * @arg UART_FLAG_TC: Transmission Complete flag + * @arg UART_FLAG_RXNE: Receive data register not empty flag + * @arg UART_FLAG_IDLE: Idle Line detection flag + * @arg UART_FLAG_ORE: Overrun Error flag + * @arg UART_FLAG_NE: Noise Error flag + * @arg UART_FLAG_FE: Framing Error flag + * @arg UART_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ + +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the specified UART pending flag. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @param __FLAG__: specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg UART_FLAG_LBD: LIN Break detection flag. + * @arg UART_FLAG_TC: Transmission Complete flag. + * @arg UART_FLAG_RXNE: Receive data register not empty flag. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register followed by a read + * operation to USART_DR register. + * @note RXNE flag can be also cleared by a read to the USART_DR register. + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register followed by a write operation to USART_DR register. + * @note TXE flag is cleared only by a write to the USART_DR register. + * + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg = 0x00U; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + UNUSED(tmpreg); \ + } while(0U) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @param __INTERRUPT__: specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_PE: Parity Error interrupt + * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define UART_IT_MASK 0x0000FFFFU +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ + (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @param __INTERRUPT__: specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_PE: Parity Error interrupt + * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ + (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) + +/** @brief Checks whether the specified UART interrupt has occurred or not. + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or + * UART peripheral. + * @param __IT__: specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ERR: Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) + +/** @brief Enable CTS flow control + * This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * The Handle Instance can be USART1, USART2 or LPUART. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control + * This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * The Handle Instance can be USART1, USART2 or LPUART. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control + * This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * The Handle Instance can be USART1, USART2 or LPUART. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control + * This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * The Handle Instance can be USART1, USART2 or LPUART. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) + +/** @brief macros to enables the UART's one bit sample method + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief macros to disables the UART's one bit sample method + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart); +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +/** @brief UART interruptions flag mask + * + */ +#define UART_CR1_REG_INDEX 1U +#define UART_CR2_REG_INDEX 2U +#define UART_CR3_REG_INDEX 3U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ + ((LENGTH) == UART_WORDLENGTH_9B)) +#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B)) +#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ + ((STOPBITS) == UART_STOPBITS_2)) +#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ + ((PARITY) == UART_PARITY_EVEN) || \ + ((PARITY) == UART_PARITY_ODD)) +#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == UART_HWCONTROL_NONE) || \ + ((CONTROL) == UART_HWCONTROL_RTS) || \ + ((CONTROL) == UART_HWCONTROL_CTS) || \ + ((CONTROL) == UART_HWCONTROL_RTS_CTS)) +#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U)) +#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ + ((STATE) == UART_STATE_ENABLE)) +#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ + ((SAMPLING) == UART_OVERSAMPLING_8)) +#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16)) +#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) +#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) +#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U) +#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU) + +#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_))) +#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U) +#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */ +#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU)) + +#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_))) +#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U) +#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U + 50U) / 100U) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */ +#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \ + ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \ + (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_UART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c new file mode 100644 index 00000000..40f28ea8 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c @@ -0,0 +1,2539 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_uart.c + * @author MCD Application Team + * @version V1.7.1 + * @date 14-April-2017 + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (##) Enable the USARTx interface clock. + (##) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required + Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx Stream. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware + flow control and Mode(Receiver/Transmitter) in the Init structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API. + + (#) For the Multi-Processor mode, initialize the UART registers by calling + the HAL_MultiProcessor_Init() API. + + [..] + (@) The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit + and receive process. + + [..] + (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the + low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized + HAL_UART_MspInit() API. + + [..] + Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_UART_Transmit() + (+) Receive an amount of data in blocking mode using HAL_UART_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() + (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() + (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxCpltCallback + (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_UART_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() + (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback + (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() + (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback + (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxCpltCallback + (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_UART_ErrorCallback + (+) Pause the DMA Transfer using HAL_UART_DMAPause() + (+) Resume the DMA Transfer using HAL_UART_DMAResume() + (+) Stop the DMA Transfer using HAL_UART_DMAStop() + + *** UART HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in UART HAL driver. + + (+) __HAL_UART_ENABLE: Enable the UART peripheral + (+) __HAL_UART_DISABLE: Disable the UART peripheral + (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not + (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag + (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt + (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt + (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not + + [..] + (@) You can refer to the UART HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup UART_Private_Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +static void UART_SetConfig (UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + please refer to Reference manual for possible UART frame formats. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs + follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor + configuration procedures (details for the procedures are available in reference manual (RM0329)). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the UART mode according to the specified parameters in + * the UART_InitTypeDef and create the associated handle. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + } + else + { + assert_param(IS_UART_INSTANCE(huart->Instance)); + } + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState= HAL_UART_STATE_READY; + huart->RxState= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state*/ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState= HAL_UART_STATE_READY; + huart->RxState= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the LIN mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param BreakDetectLength: Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection + * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_LBDL); + SET_BIT(huart->Instance->CR2, BreakDetectLength); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state*/ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState= HAL_UART_STATE_READY; + huart->RxState= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the Multi-Processor mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param Address: USART address + * @param WakeUpMethod: specifies the USART wake-up method. + * This parameter can be one of the following values: + * @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection + * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + assert_param(IS_UART_ADDRESS(Address)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In Multi-Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Clear the USART address */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_ADD); + /* Set the USART address node */ + SET_BIT(huart->Instance->CR2, Address); + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_WAKE); + SET_BIT(huart->Instance->CR1, WakeUpMethod); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState= HAL_UART_STATE_READY; + huart->RxState= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the UART peripheral. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + + /* Process Lock */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief UART MSP Init. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_MspInit could be implemented in the user file + */ +} + +/** + * @brief UART MSP DeInit. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non blocking mode: The communication is performed using Interrupts + or DMA, these APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or receive process. + The HAL_UART_ErrorCallback() user callback will be executed when + a communication error is detected. + + (#) Blocking mode APIs are: + (++) HAL_UART_Transmit() + (++) HAL_UART_Receive() + + (#) Non Blocking mode APIs with Interrupt are: + (++) HAL_UART_Transmit_IT() + (++) HAL_UART_Receive_IT() + (++) HAL_UART_IRQHandler() + + (#) Non Blocking mode functions with DMA are: + (++) HAL_UART_Transmit_DMA() + (++) HAL_UART_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non blocking mode: + (++) HAL_UART_TxCpltCallback() + (++) HAL_UART_RxCpltCallback() + (++) HAL_UART_ErrorCallback() + + [..] + (@) In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX + can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Sends an amount of data in blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp; + uint32_t tickstart = 0U; + + /* Check that a Tx process is not already ongoing */ + if(huart->gState == HAL_UART_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout managment */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + while(huart->TxXferCount > 0U) + { + huart->TxXferCount--; + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pData; + huart->Instance->DR = (*tmp & (uint16_t)0x01FF); + if(huart->Init.Parity == UART_PARITY_NONE) + { + pData +=2U; + } + else + { + pData +=1U; + } + } + else + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + huart->Instance->DR = (*pData++ & (uint8_t)0xFF); + } + } + + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp; + uint32_t tickstart = 0U; + + /* Check that a Rx process is not already ongoing */ + if(huart->RxState == HAL_UART_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Init tickstart for timeout managment */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Check the remain data to be received */ + while(huart->RxXferCount > 0U) + { + huart->RxXferCount--; + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pData; + if(huart->Init.Parity == UART_PARITY_NONE) + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); + pData +=2U; + } + else + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); + pData +=1U; + } + + } + else + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if(huart->Init.Parity == UART_PARITY_NONE) + { + *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + + } + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if(huart->gState == HAL_UART_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + /* Enable the UART Transmit data register empty Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non blocking mode + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if(huart->RxState == HAL_UART_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART Parity Error and Data Register not empty Interrupts */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp; + + /* Check that a Tx process is not already ongoing */ + if(huart->gState == HAL_UART_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA Stream */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size); + + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @note When the UART parity is enabled (PCE = 1) the data received contain the parity bit. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp; + + /* Check that a Rx process is not already ongoing */ + if(huart->RxState == HAL_UART_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA Stream */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size); + + /* Clear the Overrun flag just before enabling the DMA Rx request: can be mandatory for the second transfer */ + __HAL_UART_CLEAR_OREFLAG(huart); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pauses the DMA Transfer. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + uint32_t dmarequest = 0x00U; + + /* Process Locked */ + __HAL_LOCK(huart); + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); + if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) + { + /* Disable the UART DMA Tx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Resumes the DMA Transfer. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + if(huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if(huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_UART_CLEAR_OREFLAG(huart); + + /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Stops the DMA Transfer. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + uint32_t dmarequest = 0x00U; + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() + */ + + /* Stop UART DMA Tx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); + if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if(huart->hdmatx != NULL) + { + HAL_DMA_Abort(huart->hdmatx); + } + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if(huart->hdmarx != NULL) + { + HAL_DMA_Abort(huart->hdmarx); + } + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable PPP Interrupts + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Tx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel: use blocking DMA Abort API (no callback) */ + if(huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + HAL_DMA_Abort(huart->hdmatx); + } + } + + /* Disable the UART DMA Rx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel: use blocking DMA Abort API (no callback) */ + if(huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + HAL_DMA_Abort(huart->hdmarx); + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->RxState and huart->gState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable PPP Interrupts + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Disable the UART DMA Tx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if(huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + HAL_DMA_Abort(huart->hdmatx); + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable PPP Interrupts + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if(huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + HAL_DMA_Abort(huart->hdmarx); + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable PPP Interrupts + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t AbortCplt = 0x01U; + + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if(huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if(huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the UART DMA Tx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if(huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if(HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + AbortCplt = 0x00U; + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if(huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + AbortCplt = 0x01U; + } + else + { + AbortCplt = 0x00U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if(AbortCplt == 0x01U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable PPP Interrupts + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Disable the UART DMA Tx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if(huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if(HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ + HAL_UART_AbortTransmitCpltCallback(huart); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ + HAL_UART_AbortTransmitCpltCallback(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable PPP Interrupts + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if(huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ + HAL_UART_AbortReceiveCpltCallback(huart); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ + HAL_UART_AbortReceiveCpltCallback(huart); + } + + return HAL_OK; +} + +/** + * @brief This function handles UART interrupt request. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->SR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + uint32_t errorflags = 0x00U; + uint32_t dmarequest = 0x00U; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE)); + if(errorflags == RESET) + { + /* UART in mode Receiver -------------------------------------------------*/ + if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET)) + { + UART_Receive_IT(huart); + return; + } + } + + /* If some errors occur */ + if((errorflags != RESET) && (((cr3its & USART_CR3_EIE) != RESET) || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET))) + { + /* UART parity error interrupt occurred ----------------------------------*/ + if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART noise error interrupt occurred -----------------------------------*/ + if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART frame error interrupt occurred -----------------------------------*/ + if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART Over-Run interrupt occurred --------------------------------------*/ + if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* Call UART Error Call back function if need be --------------------------*/ + if(huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver -----------------------------------------------*/ + if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET)) + { + UART_Receive_IT(huart); + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if(((huart->ErrorCode & HAL_UART_ERROR_ORE) != RESET) || dmarequest) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Disable the UART DMA Rx request if enabled */ + if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if(huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ + HAL_UART_ErrorCallback(huart); + } + } + else + { + /* Call user error callback */ + HAL_UART_ErrorCallback(huart); + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ + HAL_UART_ErrorCallback(huart); + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + } /* End if some error occurs */ + + /* UART in mode Transmitter ------------------------------------------------*/ + if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET)) + { + UART_Transmit_IT(huart); + return; + } + + /* UART in mode Transmitter end --------------------------------------------*/ + if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET)) + { + UART_EndTransmit_IT(huart); + return; + } +} + +/** + * @brief Tx Transfer completed callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief UART error callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART: + (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character. + (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode. + (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software. + +@endverbatim + * @{ + */ + +/** + * @brief Transmits break characters. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + SET_BIT(huart->Instance->CR1, USART_CR1_SBK); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enters the UART in mute mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_RWU); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Exits the UART mute mode: wake up software. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enables the UART transmitter and disables the UART receiver. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg = 0x00U; + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /*-------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = huart->Instance->CR1; + + /* Clear TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + tmpreg |= (uint32_t)USART_CR1_TE; + + /* Write to USART CR1 */ + WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enables the UART receiver and disables the UART transmitter. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg = 0x00U; + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /*-------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = huart->Instance->CR1; + + /* Clear TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + tmpreg |= (uint32_t)USART_CR1_RE; + + /* Write to USART CR1 */ + WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief UART State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + UART communication process, return Peripheral Errors occurred during communication + process + (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral. + (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the UART state. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +{ + uint32_t temp1= 0x00U, temp2 = 0x00U; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART error code + * @param huart : pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} + +/** + * @} + */ + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* DMA Normal mode*/ + if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + } + /* DMA Circular mode */ + else + { + HAL_UART_TxCpltCallback(huart); + } +} + +/** + * @brief DMA UART transmit process half complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_UART_TxHalfCpltCallback(huart); +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* DMA Normal mode*/ + if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + { + huart->RxXferCount = 0U; + + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + } + HAL_UART_RxCpltCallback(huart); +} + +/** + * @brief DMA UART receive process half complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_UART_RxHalfCpltCallback(huart); +} + +/** + * @brief DMA UART communication error callback. + * @param hdma: DMA handle + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + uint32_t dmarequest = 0x00U; + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Stop UART DMA Tx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); + if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + HAL_UART_ErrorCallback(huart); +} + +/** + * @brief This function handles UART Communication Timeout. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param Flag: specifies the UART flag to check. + * @param Status: The new Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart: UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart: UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + + HAL_UART_ErrorCallback(huart); +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if(huart->hdmarx != NULL) + { + if(huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if(huart->hdmatx != NULL) + { + if(huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) +{ + uint16_t* tmp; + + /* Check that a Tx process is ongoing */ + if(huart->gState == HAL_UART_STATE_BUSY_TX) + { + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + tmp = (uint16_t*) huart->pTxBuffPtr; + huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); + if(huart->Init.Parity == UART_PARITY_NONE) + { + huart->pTxBuffPtr += 2U; + } + else + { + huart->pTxBuffPtr += 1U; + } + } + else + { + huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF); + } + + if(--huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Complete Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Wraps up transmission in non blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + HAL_UART_TxCpltCallback(huart); + + return HAL_OK; +} + +/** + * @brief Receives an amount of data in non blocking mode + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) +{ + uint16_t* tmp; + + /* Check that a Rx process is ongoing */ + if(huart->RxState == HAL_UART_STATE_BUSY_RX) + { + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + tmp = (uint16_t*) huart->pRxBuffPtr; + if(huart->Init.Parity == UART_PARITY_NONE) + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); + huart->pRxBuffPtr += 2U; + } + else + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); + huart->pRxBuffPtr += 1U; + } + } + else + { + if(huart->Init.Parity == UART_PARITY_NONE) + { + *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + } + + if(--huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + HAL_UART_RxCpltCallback(huart); + + return HAL_OK; + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures the UART peripheral. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg = 0x00U; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = huart->Instance->CR2; + + /* Clear STOP[13:12] bits */ + tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP); + + /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */ + tmpreg |= (uint32_t)huart->Init.StopBits; + + /* Write to USART CR2 */ + WRITE_REG(huart->Instance->CR2, (uint32_t)tmpreg); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = huart->Instance->CR1; + + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ + USART_CR1_RE | USART_CR1_OVER8)); + + /* Configure the UART Word Length, Parity and mode: + Set the M bits according to huart->Init.WordLength value + Set PCE and PS bits according to huart->Init.Parity value + Set TE and RE bits according to huart->Init.Mode value + Set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling; + + /* Write to USART CR1 */ + WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = huart->Instance->CR3; + + /* Clear CTSE and RTSE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)); + + /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */ + tmpreg |= huart->Init.HwFlowCtl; + + /* Write to USART CR3 */ + WRITE_REG(huart->Instance->CR3, (uint32_t)tmpreg); + + /* Check the Over Sampling */ + if(huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + /*-------------------------- USART BRR Configuration ---------------------*/ +#if defined(USART6) + if((huart->Instance == USART1) || (huart->Instance == USART6)) + { + huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); + } +#else + if(huart->Instance == USART1) + { + huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); + } +#endif /* USART6 */ + else + { + huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); + } + } + else + { + /*-------------------------- USART BRR Configuration ---------------------*/ +#if defined(USART6) + if((huart->Instance == USART1) || (huart->Instance == USART6)) + { + huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); + } +#else + if(huart->Instance == USART1) + { + huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); + } +#endif /* USART6 */ + else + { + huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); + } + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/gpio.h b/Inc/gpio.h index 8a1da672..2046a9b9 100644 --- a/Inc/gpio.h +++ b/Inc/gpio.h @@ -70,6 +70,9 @@ void MX_GPIO_Init(void); /* USER CODE BEGIN Prototypes */ +void SetGPIO12toUART(); +void SetGPIO12toStepDir(); + /* USER CODE END Prototypes */ #ifdef __cplusplus diff --git a/Inc/main.h b/Inc/main.h index a2fdb772..9cb5011d 100644 --- a/Inc/main.h +++ b/Inc/main.h @@ -81,7 +81,6 @@ #define M1_IB_GPIO_Port GPIOC #define GPIO_1_Pin GPIO_PIN_0 #define GPIO_1_GPIO_Port GPIOA -#define GPIO_1_EXTI_IRQn EXTI0_IRQn #define GPIO_2_Pin GPIO_PIN_1 #define GPIO_2_GPIO_Port GPIOA #define GPIO_3_Pin GPIO_PIN_2 diff --git a/Inc/stm32f4xx_hal_conf.h b/Inc/stm32f4xx_hal_conf.h index 6135ec5e..32073570 100644 --- a/Inc/stm32f4xx_hal_conf.h +++ b/Inc/stm32f4xx_hal_conf.h @@ -76,7 +76,7 @@ /* #define HAL_MMC_MODULE_ENABLED */ #define HAL_SPI_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED -/* #define HAL_UART_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED /* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ diff --git a/Inc/stm32f4xx_it.h b/Inc/stm32f4xx_it.h index 74b19b28..e7b8672f 100644 --- a/Inc/stm32f4xx_it.h +++ b/Inc/stm32f4xx_it.h @@ -52,8 +52,6 @@ void BusFault_Handler(void); void UsageFault_Handler(void); void DebugMon_Handler(void); void SysTick_Handler(void); -void EXTI0_IRQHandler(void); -void EXTI2_IRQHandler(void); void ADC_IRQHandler(void); void OTG_FS_IRQHandler(void); diff --git a/Inc/usart.h b/Inc/usart.h new file mode 100644 index 00000000..808284cd --- /dev/null +++ b/Inc/usart.h @@ -0,0 +1,91 @@ +/** + ****************************************************************************** + * File Name : USART.h + * Description : This file provides code for the configuration + * of the USART instances. + ****************************************************************************** + * This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __usart_H +#define __usart_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern UART_HandleTypeDef huart4; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +extern void _Error_Handler(char *, int); + +void MX_UART4_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__ usart_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Makefile b/Makefile index 081f17b8..e2033d82 100644 --- a/Makefile +++ b/Makefile @@ -50,6 +50,7 @@ C_SOURCES = \ Src/spi.c \ Src/stm32f4xx_hal_msp.c \ Src/can.c \ + Src/usart.c \ Src/usbd_conf.c \ Src/usbd_desc.c \ Src/usb_device.c \ @@ -74,6 +75,7 @@ C_SOURCES = \ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c \ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c \ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c \ + Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c \ Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c \ Src/usbd_cdc_if.c \ Src/syscalls.c \ diff --git a/Odrive.ioc b/Odrive.ioc index b7bd70f6..6bc3ca05 100755 --- a/Odrive.ioc +++ b/Odrive.ioc @@ -92,8 +92,9 @@ Mcu.IP10=TIM2 Mcu.IP11=TIM3 Mcu.IP12=TIM4 Mcu.IP13=TIM8 -Mcu.IP14=USB_DEVICE -Mcu.IP15=USB_OTG_FS +Mcu.IP14=UART4 +Mcu.IP15=USB_DEVICE +Mcu.IP16=USB_OTG_FS Mcu.IP2=ADC3 Mcu.IP3=CAN1 Mcu.IP4=FREERTOS @@ -102,7 +103,7 @@ Mcu.IP6=RCC Mcu.IP7=SPI3 Mcu.IP8=SYS Mcu.IP9=TIM1 -Mcu.IPNb=16 +Mcu.IPNb=17 Mcu.Name=STM32F405RGTx Mcu.Package=LQFP64 Mcu.Pin0=PC13-ANTI_TAMP @@ -169,8 +170,7 @@ MxDb.Version=DB.4.0.220 NVIC.ADC_IRQn=true\:5\:0\:false\:false\:true\:true NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false -NVIC.EXTI0_IRQn=true\:0\:0\:false\:false\:true\:false -NVIC.EXTI2_IRQn=true\:0\:0\:false\:false\:true\:false +NVIC.EXTI2_IRQn=true\:0\:0\:false\:false\:false\:false NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false @@ -184,12 +184,14 @@ PA0-WKUP.GPIOParameters=GPIO_PuPd,GPIO_Label PA0-WKUP.GPIO_Label=GPIO_1 PA0-WKUP.GPIO_PuPd=GPIO_PULLDOWN PA0-WKUP.Locked=true -PA0-WKUP.Signal=GPXTI0 +PA0-WKUP.Signal=SharedStack_PA0 +PA0-WKUP.Stacked=true PA1.GPIOParameters=GPIO_PuPd,GPIO_Label PA1.GPIO_Label=GPIO_2 PA1.GPIO_PuPd=GPIO_NOPULL PA1.Locked=true -PA1.Signal=GPIO_Input +PA1.Signal=SharedStack_PA1 +PA1.Stacked=true PA10.GPIOParameters=GPIO_Label PA10.GPIO_Label=M0_CH PA10.Locked=true @@ -398,7 +400,7 @@ ProjectManager.StackSize=0x800 ProjectManager.TargetToolchain=SW4STM32 ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-MX_ADC1_Init-ADC1-false-HAL,3-MX_ADC2_Init-ADC2-false-HAL,4-MX_CAN1_Init-CAN1-false-HAL,5-MX_TIM1_Init-TIM1-false-HAL,6-MX_TIM8_Init-TIM8-false-HAL,7-MX_TIM3_Init-TIM3-false-HAL,8-MX_TIM4_Init-TIM4-false-HAL,9-MX_SPI3_Init-SPI3-false-HAL,10-MX_ADC3_Init-ADC3-false-HAL,11-SystemClock_Config-RCC-false-HAL,12-MX_TIM2_Init-TIM2-false-HAL,13-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-MX_ADC1_Init-ADC1-false-HAL,3-MX_ADC2_Init-ADC2-false-HAL,4-MX_CAN1_Init-CAN1-false-HAL,5-MX_TIM1_Init-TIM1-false-HAL,6-MX_TIM8_Init-TIM8-false-HAL,7-MX_TIM3_Init-TIM3-false-HAL,8-MX_TIM4_Init-TIM4-false-HAL,9-MX_SPI3_Init-SPI3-false-HAL,10-MX_ADC3_Init-ADC3-false-HAL,11-SystemClock_Config-RCC-false-HAL,12-MX_TIM2_Init-TIM2-false-HAL,13-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL,14-MX_UART4_Init-UART4-false-HAL RCC.48MHZClocksFreq_Value=48000000 RCC.AHBFreq_Value=168000000 RCC.APB1CLKDivider=RCC_HCLK_DIV4 @@ -464,8 +466,6 @@ SH.ADCx_IN5.ConfNb=2 SH.ADCx_IN6.0=ADC1_IN6,IN6 SH.ADCx_IN6.1=ADC2_IN6,IN6 SH.ADCx_IN6.ConfNb=2 -SH.GPXTI0.0=GPIO_EXTI0 -SH.GPXTI0.ConfNb=1 SH.GPXTI2.0=GPIO_EXTI2 SH.GPXTI2.ConfNb=1 SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1 CH1N @@ -492,6 +492,12 @@ SH.S_TIM8_CH2.0=TIM8_CH2,PWM Generation2 CH2 CH2N SH.S_TIM8_CH2.ConfNb=1 SH.S_TIM8_CH3.0=TIM8_CH3,PWM Generation3 CH3 CH3N SH.S_TIM8_CH3.ConfNb=1 +SH.SharedStack_PA0.0=GPIO_EXTI0+0 +SH.SharedStack_PA0.1=UART4_TX,Asynchronous +SH.SharedStack_PA0.ConfNb=2 +SH.SharedStack_PA1.0=GPIO_Input+0 +SH.SharedStack_PA1.1=UART4_RX,Asynchronous +SH.SharedStack_PA1.ConfNb=2 SPI3.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16 SPI3.CLKPhase=SPI_PHASE_2EDGE SPI3.CalculateBaudRate=2.625 MBits/s @@ -555,6 +561,8 @@ TIM8.OffStateIDLEMode=TIM_OSSI_ENABLE TIM8.OffStateRunMode=TIM_OSSR_ENABLE TIM8.Period=TIM_1_8_PERIOD_CLOCKS TIM8.TIM_MasterOutputTrigger=TIM_TRGO_UPDATE +UART4.IPParameters=VirtualMode +UART4.VirtualMode=Asynchronous USB_DEVICE.CLASS_NAME_FS=CDC USB_DEVICE.IPParameters=VirtualMode-CDC_FS,VirtualModeFS,CLASS_NAME_FS,MANUFACTURER_STRING-CDC_FS,PRODUCT_STRING_CDC_FS,VID-CDC_FS,PID_CDC_FS,SERIALNUMBER_STRING_CDC_FS USB_DEVICE.MANUFACTURER_STRING-CDC_FS=ODrive diff --git a/Src/gpio.c b/Src/gpio.c index a7752882..eaa8b365 100644 --- a/Src/gpio.c +++ b/Src/gpio.c @@ -71,6 +71,8 @@ * Output * EVENT_OUT * EXTI + PA0-WKUP ------> SharedStack_PA0 + PA1 ------> SharedStack_PA1 */ void MX_GPIO_Init(void) { @@ -100,14 +102,30 @@ void MX_GPIO_Init(void) GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - /*Configure GPIO pins : PAPin PAPin */ - GPIO_InitStruct.Pin = GPIO_1_Pin|GPIO_3_Pin; + /*Configure GPIO pin : PtPin */ + GPIO_InitStruct.Pin = GPIO_1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_UART4; + HAL_GPIO_Init(GPIO_1_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : PtPin */ + GPIO_InitStruct.Pin = GPIO_2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_UART4; + HAL_GPIO_Init(GPIO_2_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : PtPin */ + GPIO_InitStruct.Pin = GPIO_3_Pin; GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; GPIO_InitStruct.Pull = GPIO_PULLDOWN; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + HAL_GPIO_Init(GPIO_3_GPIO_Port, &GPIO_InitStruct); - /*Configure GPIO pins : PAPin PAPin PAPin */ - GPIO_InitStruct.Pin = GPIO_2_Pin|GPIO_4_Pin|M0_ENC_Z_Pin; + /*Configure GPIO pins : PAPin PAPin */ + GPIO_InitStruct.Pin = GPIO_4_Pin|M0_ENC_Z_Pin; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); @@ -132,9 +150,6 @@ void MX_GPIO_Init(void) HAL_GPIO_Init(nFAULT_GPIO_Port, &GPIO_InitStruct); /* EXTI interrupt init*/ - HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(EXTI0_IRQn); - HAL_NVIC_SetPriority(EXTI2_IRQn, 0, 0); HAL_NVIC_EnableIRQ(EXTI2_IRQn); @@ -143,6 +158,43 @@ void MX_GPIO_Init(void) /* USER CODE BEGIN 2 */ #endif // End GPIO Include +void SetGPIO12toUART() { + GPIO_InitTypeDef GPIO_InitStruct; + + HAL_NVIC_DisableIRQ(EXTI0_IRQn); + + GPIO_InitStruct.Pin = GPIO_1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_UART4; + HAL_GPIO_Init(GPIO_1_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_UART4; + HAL_GPIO_Init(GPIO_2_GPIO_Port, &GPIO_InitStruct); +} + +void SetGPIO12toStepDir() { + GPIO_InitTypeDef GPIO_InitStruct; + + GPIO_InitStruct.Pin = GPIO_1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + HAL_GPIO_Init(GPIO_1_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIO_2_GPIO_Port, &GPIO_InitStruct); + + HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(EXTI0_IRQn); +} + //Dispatch processing of external interrupts based on source void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) { //Step signals for M0 and M1 diff --git a/Src/main.c b/Src/main.c index ddf6bb29..2890fec2 100644 --- a/Src/main.c +++ b/Src/main.c @@ -53,6 +53,7 @@ #include "can.h" #include "spi.h" #include "tim.h" +#include "usart.h" #include "usb_device.h" #include "gpio.h" @@ -115,6 +116,7 @@ int main(void) MX_SPI3_Init(); MX_ADC3_Init(); MX_TIM2_Init(); + MX_UART4_Init(); /* USER CODE BEGIN 2 */ diff --git a/Src/stm32f4xx_it.c b/Src/stm32f4xx_it.c index 8b218e23..2d00e4c7 100644 --- a/Src/stm32f4xx_it.c +++ b/Src/stm32f4xx_it.c @@ -171,34 +171,6 @@ void SysTick_Handler(void) /* please refer to the startup file (startup_stm32f4xx.s). */ /******************************************************************************/ -/** -* @brief This function handles EXTI line0 interrupt. -*/ -void EXTI0_IRQHandler(void) -{ - /* USER CODE BEGIN EXTI0_IRQn 0 */ - - /* USER CODE END EXTI0_IRQn 0 */ - HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0); - /* USER CODE BEGIN EXTI0_IRQn 1 */ - - /* USER CODE END EXTI0_IRQn 1 */ -} - -/** -* @brief This function handles EXTI line2 interrupt. -*/ -void EXTI2_IRQHandler(void) -{ - /* USER CODE BEGIN EXTI2_IRQn 0 */ - - /* USER CODE END EXTI2_IRQn 0 */ - HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2); - /* USER CODE BEGIN EXTI2_IRQn 1 */ - - /* USER CODE END EXTI2_IRQn 1 */ -} - /** * @brief This function handles ADC1, ADC2 and ADC3 global interrupts. */ @@ -267,5 +239,22 @@ void ADC_IRQ_Dispatch(ADC_HandleTypeDef* hadc, ADC_handler_t callback) { } } + +/** +* @brief This function handles EXTI line0 interrupt. +*/ +void EXTI0_IRQHandler(void) +{ + HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0); +} + +/** +* @brief This function handles EXTI line2 interrupt. +*/ +void EXTI2_IRQHandler(void) +{ + HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2); +} + /* USER CODE END 1 */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/usart.c b/Src/usart.c new file mode 100644 index 00000000..a472eaf2 --- /dev/null +++ b/Src/usart.c @@ -0,0 +1,151 @@ +/** + ****************************************************************************** + * File Name : USART.c + * Description : This file provides code for the configuration + * of the USART instances. + ****************************************************************************** + * This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usart.h" + +#include "gpio.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +UART_HandleTypeDef huart4; + +/* UART4 init function */ +void MX_UART4_Init(void) +{ + + huart4.Instance = UART4; + huart4.Init.BaudRate = 115200; + huart4.Init.WordLength = UART_WORDLENGTH_8B; + huart4.Init.StopBits = UART_STOPBITS_1; + huart4.Init.Parity = UART_PARITY_NONE; + huart4.Init.Mode = UART_MODE_TX_RX; + huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart4.Init.OverSampling = UART_OVERSAMPLING_16; + if (HAL_UART_Init(&huart4) != HAL_OK) + { + _Error_Handler(__FILE__, __LINE__); + } + +} + +void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct; + if(uartHandle->Instance==UART4) + { + /* USER CODE BEGIN UART4_MspInit 0 */ + + /* USER CODE END UART4_MspInit 0 */ + /* UART4 clock enable */ + __HAL_RCC_UART4_CLK_ENABLE(); + + /**UART4 GPIO Configuration + PA0-WKUP ------> UART4_TX + PA1 ------> UART4_RX + */ + GPIO_InitStruct.Pin = GPIO_1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_UART4; + HAL_GPIO_Init(GPIO_1_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_UART4; + HAL_GPIO_Init(GPIO_2_GPIO_Port, &GPIO_InitStruct); + + /* USER CODE BEGIN UART4_MspInit 1 */ + + /* USER CODE END UART4_MspInit 1 */ + } +} + +void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle) +{ + + if(uartHandle->Instance==UART4) + { + /* USER CODE BEGIN UART4_MspDeInit 0 */ + + /* USER CODE END UART4_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_UART4_CLK_DISABLE(); + + /**UART4 GPIO Configuration + PA0-WKUP ------> UART4_TX + PA1 ------> UART4_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_1_Pin|GPIO_2_Pin); + + /* USER CODE BEGIN UART4_MspDeInit 1 */ + + /* USER CODE END UART4_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/