diff --git a/Firmware/README.md b/Firmware/README.md
index fac880aa..afca26ce 100644
--- a/Firmware/README.md
+++ b/Firmware/README.md
@@ -75,7 +75,7 @@ You must set:
 * `motor_type`: This is the type of motor being used. Currently two types of motors are supported -- High-current motors (`MOTOR_TYPE_HIGH_CURRENT`) and Gimbal motors (`MOTOR_TYPE_GIMBAL`).
 
 ### Motor Modes
-The firwmare currently supports two different types of motors, high-current motors, and Gimbal motors. If you're using a regular hobby brushless motor like [this](https://hobbyking.com/en_us/turnigy-aerodrive-sk3-5065-236kv-brushless-outrunner-motor.html) one, you should set `motor_mode` to `MOTOR_TYPE_HIGH_CURRENT`. For high-torque gimbal motors like [this](https://hobbyking.com/en_us/turnigy-hd-5208-brushless-gimbal-motor-bldc.html) one, you should choose `MOTOR_TYPE_GIMBAL`.
+If you're using a regular hobby brushless motor like [this](https://hobbyking.com/en_us/turnigy-aerodrive-sk3-5065-236kv-brushless-outrunner-motor.html) one, you should set `motor_mode` to `MOTOR_TYPE_HIGH_CURRENT`. For low-current gimbal motors like [this](https://hobbyking.com/en_us/turnigy-hd-5208-brushless-gimbal-motor-bldc.html) one, you should choose `MOTOR_TYPE_GIMBAL`. Do not use `MOTOR_TYPE_GIMBAL` on a motor that is not a gimbal motor, as it may overheat the motor or the ODrive.
 
 **Further detail:**