From 0a7cca22179a647fad2e9e6b2290eba8733e18e3 Mon Sep 17 00:00:00 2001 From: Oskar Weigl Date: Mon, 12 Mar 2018 21:58:19 -0700 Subject: [PATCH] rerun CubeMX --- Firmware/Board/v3/Inc/main.h | 2 - .../Class/CDC/Src/usbd_cdc.c | 1852 +++++++------- .../FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c | 2 +- .../FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h | 2142 ++++++++--------- Firmware/Board/v3/Odrive.ioc | 2 +- 5 files changed, 1999 insertions(+), 2001 deletions(-) diff --git a/Firmware/Board/v3/Inc/main.h b/Firmware/Board/v3/Inc/main.h index 31ac7926..6b430f81 100644 --- a/Firmware/Board/v3/Inc/main.h +++ b/Firmware/Board/v3/Inc/main.h @@ -68,8 +68,6 @@ #define TIM_APB1_CLOCK_HZ 84000000 #define TIM_APB1_PERIOD_CLOCKS 4096 #define TIM_APB1_DEADTIME_CLOCKS 40 -#define TIM_TIME_BASE TIM14 - #define M0_nCS_Pin GPIO_PIN_13 #define M0_nCS_GPIO_Port GPIOC diff --git a/Firmware/Board/v3/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/Firmware/Board/v3/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c index 1cd67a2e..24465641 100644 --- a/Firmware/Board/v3/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c +++ b/Firmware/Board/v3/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c @@ -1,926 +1,926 @@ -/** - ****************************************************************************** - * @file usbd_cdc.c - * @author MCD Application Team - * @version V2.4.2 - * @date 11-December-2015 - * @brief This file provides the high layer firmware functions to manage the - * following functionalities of the USB CDC Class: - * - Initialization and Configuration of high and low layer - * - Enumeration as CDC Device (and enumeration for each implemented memory interface) - * - OUT/IN data transfer - * - Command IN transfer (class requests management) - * - Error management - * - * @verbatim - * - * =================================================================== - * CDC Class Driver Description - * =================================================================== - * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices - * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus - * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" - * This driver implements the following aspects of the specification: - * - Device descriptor management - * - Configuration descriptor management - * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) - * - Requests management (as described in section 6.2 in specification) - * - Abstract Control Model compliant - * - Union Functional collection (using 1 IN endpoint for control) - * - Data interface class - * - * These aspects may be enriched or modified for a specific user application. - * - * This driver doesn't implement the following aspects of the specification - * (but it is possible to manage these features with some modifications on this driver): - * - Any class-specific aspect relative to communication classes should be managed by user application. - * - All communication classes other than PSTN are not managed - * - * @endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2015 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_cdc.h" -#include "usbd_desc.h" -#include "usbd_ctlreq.h" -#include -#include - -/** @addtogroup STM32_USB_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup USBD_CDC - * @brief usbd core module - * @{ - */ - -/** @defgroup USBD_CDC_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_CDC_Private_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_CDC_Private_Macros - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBD_CDC_Private_FunctionPrototypes - * @{ - */ - - -static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, - uint8_t cfgidx); - -static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, - uint8_t cfgidx); - -static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, - USBD_SetupReqTypedef *req); - -static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, - uint8_t epnum); - -static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, - uint8_t epnum); - -static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev); - -static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length); - -static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length); - -static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); - -static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); - -uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length); - -/* USB Standard Device Descriptor */ -__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = -{ - USB_LEN_DEV_QUALIFIER_DESC, - USB_DESC_TYPE_DEVICE_QUALIFIER, - 0x00, - 0x02, - 0x00, - 0x00, - 0x00, - 0x40, - 0x01, - 0x00, -}; - -/** - * @} - */ - -/** @defgroup USBD_CDC_Private_Variables - * @{ - */ - - -/* CDC interface class callbacks structure */ -USBD_ClassTypeDef USBD_CDC = -{ - USBD_CDC_Init, - USBD_CDC_DeInit, - USBD_CDC_Setup, - NULL, /* EP0_TxSent, */ - USBD_CDC_EP0_RxReady, - USBD_CDC_DataIn, - USBD_CDC_DataOut, - NULL, - NULL, - NULL, - USBD_CDC_GetHSCfgDesc, - USBD_CDC_GetFSCfgDesc, - USBD_CDC_GetOtherSpeedCfgDesc, - USBD_CDC_GetDeviceQualifierDescriptor, -}; - -/* USB CDC device Configuration Descriptor */ -__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = -{ - /*Configuration Descriptor*/ - 0x09, /* bLength: Configuration Descriptor size */ - USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ - USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ - 0x00, - 0x02, /* bNumInterfaces: 2 interface */ - 0x01, /* bConfigurationValue: Configuration value */ - 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ - 0xC0, /* bmAttributes: self powered */ - 0x32, /* MaxPower 0 mA */ - - /*---------------------------------------------------------------------------*/ - - /*Interface Descriptor */ - 0x09, /* bLength: Interface Descriptor size */ - USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ - /* Interface descriptor type */ - 0x00, /* bInterfaceNumber: Number of Interface */ - 0x00, /* bAlternateSetting: Alternate setting */ - 0x01, /* bNumEndpoints: One endpoints used */ - 0x02, /* bInterfaceClass: Communication Interface Class */ - 0x02, /* bInterfaceSubClass: Abstract Control Model */ - 0x01, /* bInterfaceProtocol: Common AT commands */ - 0x00, /* iInterface: */ - - /*Header Functional Descriptor*/ - 0x05, /* bLength: Endpoint Descriptor size */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x00, /* bDescriptorSubtype: Header Func Desc */ - 0x10, /* bcdCDC: spec release number */ - 0x01, - - /*Call Management Functional Descriptor*/ - 0x05, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x01, /* bDescriptorSubtype: Call Management Func Desc */ - 0x00, /* bmCapabilities: D0+D1 */ - 0x01, /* bDataInterface: 1 */ - - /*ACM Functional Descriptor*/ - 0x04, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ - 0x02, /* bmCapabilities */ - - /*Union Functional Descriptor*/ - 0x05, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x06, /* bDescriptorSubtype: Union func desc */ - 0x00, /* bMasterInterface: Communication class interface */ - 0x01, /* bSlaveInterface0: Data Class Interface */ - - /*Endpoint 2 Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_CMD_EP, /* bEndpointAddress */ - 0x03, /* bmAttributes: Interrupt */ - LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_CMD_PACKET_SIZE), - 0x10, /* bInterval: */ - /*---------------------------------------------------------------------------*/ - - /*Data class interface descriptor*/ - 0x09, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ - 0x01, /* bInterfaceNumber: Number of Interface */ - 0x00, /* bAlternateSetting: Alternate setting */ - 0x02, /* bNumEndpoints: Two endpoints used */ - 0x0A, /* bInterfaceClass: CDC */ - 0x00, /* bInterfaceSubClass: */ - 0x00, /* bInterfaceProtocol: */ - 0x00, /* iInterface: */ - - /*Endpoint OUT Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_OUT_EP, /* bEndpointAddress */ - 0x02, /* bmAttributes: Bulk */ - LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), - 0x00, /* bInterval: ignore for Bulk transfer */ - - /*Endpoint IN Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_IN_EP, /* bEndpointAddress */ - 0x02, /* bmAttributes: Bulk */ - LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), - 0x00 /* bInterval: ignore for Bulk transfer */ -} ; - - -/* USB CDC device Configuration Descriptor */ -__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = -{ - /*Configuration Descriptor*/ - 0x09, /* bLength: Configuration Descriptor size */ - USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ - USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ - 0x00, - 0x02, /* bNumInterfaces: 2 interface */ - 0x01, /* bConfigurationValue: Configuration value */ - 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ - 0xC0, /* bmAttributes: self powered */ - 0x32, /* MaxPower 0 mA */ - - /*---------------------------------------------------------------------------*/ - - /*Interface Descriptor */ - 0x09, /* bLength: Interface Descriptor size */ - USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ - /* Interface descriptor type */ - 0x00, /* bInterfaceNumber: Number of Interface */ - 0x00, /* bAlternateSetting: Alternate setting */ - 0x01, /* bNumEndpoints: One endpoints used */ - 0x02, /* bInterfaceClass: Communication Interface Class */ - 0x02, /* bInterfaceSubClass: Abstract Control Model */ - 0x01, /* bInterfaceProtocol: Common AT commands */ - 0x00, /* iInterface: */ - - /*Header Functional Descriptor*/ - 0x05, /* bLength: Endpoint Descriptor size */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x00, /* bDescriptorSubtype: Header Func Desc */ - 0x10, /* bcdCDC: spec release number */ - 0x01, - - /*Call Management Functional Descriptor*/ - 0x05, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x01, /* bDescriptorSubtype: Call Management Func Desc */ - 0x00, /* bmCapabilities: D0+D1 */ - 0x01, /* bDataInterface: 1 */ - - /*ACM Functional Descriptor*/ - 0x04, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ - 0x02, /* bmCapabilities */ - - /*Union Functional Descriptor*/ - 0x05, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x06, /* bDescriptorSubtype: Union func desc */ - 0x00, /* bMasterInterface: Communication class interface */ - 0x01, /* bSlaveInterface0: Data Class Interface */ - - /*Endpoint 2 Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_CMD_EP, /* bEndpointAddress */ - 0x03, /* bmAttributes: Interrupt */ - LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_CMD_PACKET_SIZE), - 0x10, /* bInterval: */ - /*---------------------------------------------------------------------------*/ - - /*Data class interface descriptor*/ - 0x09, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ - 0x01, /* bInterfaceNumber: Number of Interface */ - 0x00, /* bAlternateSetting: Alternate setting */ - 0x02, /* bNumEndpoints: Two endpoints used */ - 0x0A, /* bInterfaceClass: CDC */ - 0x00, /* bInterfaceSubClass: */ - 0x00, /* bInterfaceProtocol: */ - 0x00, /* iInterface: */ - - /*Endpoint OUT Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_OUT_EP, /* bEndpointAddress */ - 0x02, /* bmAttributes: Bulk */ - LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), - 0x00, /* bInterval: ignore for Bulk transfer */ - - /*Endpoint IN Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_IN_EP, /* bEndpointAddress */ - 0x02, /* bmAttributes: Bulk */ - LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), - 0x00 /* bInterval: ignore for Bulk transfer */ -} ; - -__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = -{ - 0x09, /* bLength: Configuation Descriptor size */ - USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION, - USB_CDC_CONFIG_DESC_SIZ, - 0x00, - 0x02, /* bNumInterfaces: 2 interfaces */ - 0x01, /* bConfigurationValue: */ - 0x04, /* iConfiguration: */ - 0xC0, /* bmAttributes: */ - 0x32, /* MaxPower 100 mA */ - - /*Interface Descriptor */ - 0x09, /* bLength: Interface Descriptor size */ - USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ - /* Interface descriptor type */ - 0x00, /* bInterfaceNumber: Number of Interface */ - 0x00, /* bAlternateSetting: Alternate setting */ - 0x01, /* bNumEndpoints: One endpoints used */ - 0x02, /* bInterfaceClass: Communication Interface Class */ - 0x02, /* bInterfaceSubClass: Abstract Control Model */ - 0x01, /* bInterfaceProtocol: Common AT commands */ - 0x00, /* iInterface: */ - - /*Header Functional Descriptor*/ - 0x05, /* bLength: Endpoint Descriptor size */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x00, /* bDescriptorSubtype: Header Func Desc */ - 0x10, /* bcdCDC: spec release number */ - 0x01, - - /*Call Management Functional Descriptor*/ - 0x05, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x01, /* bDescriptorSubtype: Call Management Func Desc */ - 0x00, /* bmCapabilities: D0+D1 */ - 0x01, /* bDataInterface: 1 */ - - /*ACM Functional Descriptor*/ - 0x04, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ - 0x02, /* bmCapabilities */ - - /*Union Functional Descriptor*/ - 0x05, /* bFunctionLength */ - 0x24, /* bDescriptorType: CS_INTERFACE */ - 0x06, /* bDescriptorSubtype: Union func desc */ - 0x00, /* bMasterInterface: Communication class interface */ - 0x01, /* bSlaveInterface0: Data Class Interface */ - - /*Endpoint 2 Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */ - CDC_CMD_EP, /* bEndpointAddress */ - 0x03, /* bmAttributes: Interrupt */ - LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ - HIBYTE(CDC_CMD_PACKET_SIZE), - 0xFF, /* bInterval: */ - - /*---------------------------------------------------------------------------*/ - - /*Data class interface descriptor*/ - 0x09, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ - 0x01, /* bInterfaceNumber: Number of Interface */ - 0x00, /* bAlternateSetting: Alternate setting */ - 0x02, /* bNumEndpoints: Two endpoints used */ - 0x0A, /* bInterfaceClass: CDC */ - 0x00, /* bInterfaceSubClass: */ - 0x00, /* bInterfaceProtocol: */ - 0x00, /* iInterface: */ - - /*Endpoint OUT Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_OUT_EP, /* bEndpointAddress */ - 0x02, /* bmAttributes: Bulk */ - 0x40, /* wMaxPacketSize: */ - 0x00, - 0x00, /* bInterval: ignore for Bulk transfer */ - - /*Endpoint IN Descriptor*/ - 0x07, /* bLength: Endpoint Descriptor size */ - USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ - CDC_IN_EP, /* bEndpointAddress */ - 0x02, /* bmAttributes: Bulk */ - 0x40, /* wMaxPacketSize: */ - 0x00, - 0x00 /* bInterval */ -}; - -/** - * @} - */ - -/** @defgroup USBD_CDC_Private_Functions - * @{ - */ - -/** - * @brief USBD_CDC_Init - * Initialize the CDC interface - * @param pdev: device instance - * @param cfgidx: Configuration index - * @retval status - */ -static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, - uint8_t cfgidx) -{ - uint8_t ret = 0; - USBD_CDC_HandleTypeDef *hcdc; - - if(pdev->dev_speed == USBD_SPEED_HIGH ) - { - /* Open EP IN */ - USBD_LL_OpenEP(pdev, - CDC_IN_EP, - USBD_EP_TYPE_BULK, - CDC_DATA_HS_IN_PACKET_SIZE); - - /* Open EP OUT */ - USBD_LL_OpenEP(pdev, - CDC_OUT_EP, - USBD_EP_TYPE_BULK, - CDC_DATA_HS_OUT_PACKET_SIZE); - - } - else - { - /* Open EP IN */ - USBD_LL_OpenEP(pdev, - CDC_IN_EP, - USBD_EP_TYPE_BULK, - CDC_DATA_FS_IN_PACKET_SIZE); - - /* Open EP OUT */ - USBD_LL_OpenEP(pdev, - CDC_OUT_EP, - USBD_EP_TYPE_BULK, - CDC_DATA_FS_OUT_PACKET_SIZE); - } - /* Open Command IN EP */ - USBD_LL_OpenEP(pdev, - CDC_CMD_EP, - USBD_EP_TYPE_INTR, - CDC_CMD_PACKET_SIZE); - - - pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef)); - - if(pdev->pClassData == NULL) - { - ret = 1; - } - else - { - hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - /* Init physical Interface components */ - ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init(); - - /* Init Xfer states */ - hcdc->TxState =0; - hcdc->RxState =0; - - if(pdev->dev_speed == USBD_SPEED_HIGH ) - { - /* Prepare Out endpoint to receive next packet */ - USBD_LL_PrepareReceive(pdev, - CDC_OUT_EP, - hcdc->RxBuffer, - CDC_DATA_HS_OUT_PACKET_SIZE); - } - else - { - /* Prepare Out endpoint to receive next packet */ - USBD_LL_PrepareReceive(pdev, - CDC_OUT_EP, - hcdc->RxBuffer, - CDC_DATA_FS_OUT_PACKET_SIZE); - } - - - } - return ret; -} - -/** - * @brief USBD_CDC_Init - * DeInitialize the CDC layer - * @param pdev: device instance - * @param cfgidx: Configuration index - * @retval status - */ -static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, - uint8_t cfgidx) -{ - uint8_t ret = 0; - - /* Open EP IN */ - USBD_LL_CloseEP(pdev, - CDC_IN_EP); - - /* Open EP OUT */ - USBD_LL_CloseEP(pdev, - CDC_OUT_EP); - - /* Open Command IN EP */ - USBD_LL_CloseEP(pdev, - CDC_CMD_EP); - - - /* DeInit physical Interface components */ - if(pdev->pClassData != NULL) - { - ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit(); - USBD_free(pdev->pClassData); - pdev->pClassData = NULL; - } - - return ret; -} - -/** - * @brief USBD_CDC_Setup - * Handle the CDC specific requests - * @param pdev: instance - * @param req: usb requests - * @retval status - */ -static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, - USBD_SetupReqTypedef *req) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - static uint8_t ifalt = 0; - - switch (req->bmRequest & USB_REQ_TYPE_MASK) - { - case USB_REQ_TYPE_CLASS : - if (req->wLength) - { - if (req->bmRequest & 0x80) - { - ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, - (uint8_t *)hcdc->data, - req->wLength); - USBD_CtlSendData (pdev, - (uint8_t *)hcdc->data, - req->wLength); - } - else - { - hcdc->CmdOpCode = req->bRequest; - hcdc->CmdLength = req->wLength; - - USBD_CtlPrepareRx (pdev, - (uint8_t *)hcdc->data, - req->wLength); - } - - } - else - { - ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, - (uint8_t*)req, - 0); - } - break; - - case USB_REQ_TYPE_STANDARD: - switch (req->bRequest) - { - case USB_REQ_GET_INTERFACE : - USBD_CtlSendData (pdev, - &ifalt, - 1); - break; - - case USB_REQ_SET_INTERFACE : - break; - } - - default: - break; - } - return USBD_OK; -} - -/** - * @brief USBD_CDC_DataIn - * Data sent on non-control IN endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - if(pdev->pClassData != NULL) - { - - hcdc->TxState = 0; - osSemaphoreRelease(sem_usb_tx); - return USBD_OK; - } - else - { - return USBD_FAIL; - } -} - -/** - * @brief USBD_CDC_DataOut - * Data received on non-control Out endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - /* Get the received data length */ - hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum); - - /* USB data will be immediately processed, this allow next USB traffic being - NAKed till the end of the application Xfer */ - if(pdev->pClassData != NULL) - { - ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength); - - return USBD_OK; - } - else - { - return USBD_FAIL; - } -} - - - -/** - * @brief USBD_CDC_DataOut - * Data received on non-control Out endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF)) - { - ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, - (uint8_t *)hcdc->data, - hcdc->CmdLength); - hcdc->CmdOpCode = 0xFF; - - } - return USBD_OK; -} - -/** - * @brief USBD_CDC_GetFSCfgDesc - * Return configuration descriptor - * @param speed : current device speed - * @param length : pointer data length - * @retval pointer to descriptor buffer - */ -static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length) -{ - *length = sizeof (USBD_CDC_CfgFSDesc); - return USBD_CDC_CfgFSDesc; -} - -/** - * @brief USBD_CDC_GetHSCfgDesc - * Return configuration descriptor - * @param speed : current device speed - * @param length : pointer data length - * @retval pointer to descriptor buffer - */ -static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length) -{ - *length = sizeof (USBD_CDC_CfgHSDesc); - return USBD_CDC_CfgHSDesc; -} - -/** - * @brief USBD_CDC_GetCfgDesc - * Return configuration descriptor - * @param speed : current device speed - * @param length : pointer data length - * @retval pointer to descriptor buffer - */ -static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length) -{ - *length = sizeof (USBD_CDC_OtherSpeedCfgDesc); - return USBD_CDC_OtherSpeedCfgDesc; -} - -/** -* @brief DeviceQualifierDescriptor -* return Device Qualifier descriptor -* @param length : pointer data length -* @retval pointer to descriptor buffer -*/ -uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length) -{ - *length = sizeof (USBD_CDC_DeviceQualifierDesc); - return USBD_CDC_DeviceQualifierDesc; -} - -/** -* @brief USBD_CDC_RegisterInterface - * @param pdev: device instance - * @param fops: CD Interface callback - * @retval status - */ -uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev, - USBD_CDC_ItfTypeDef *fops) -{ - uint8_t ret = USBD_FAIL; - - if(fops != NULL) - { - pdev->pUserData= fops; - ret = USBD_OK; - } - - return ret; -} - -/** - * @brief USBD_CDC_SetTxBuffer - * @param pdev: device instance - * @param pbuff: Tx Buffer - * @retval status - */ -uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev, - uint8_t *pbuff, - uint16_t length) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - hcdc->TxBuffer = pbuff; - hcdc->TxLength = length; - - return USBD_OK; -} - - -/** - * @brief USBD_CDC_SetRxBuffer - * @param pdev: device instance - * @param pbuff: Rx Buffer - * @retval status - */ -uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev, - uint8_t *pbuff) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - hcdc->RxBuffer = pbuff; - - return USBD_OK; -} - -/** - * @brief USBD_CDC_DataOut - * Data received on non-control Out endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - if(pdev->pClassData != NULL) - { - if(hcdc->TxState == 0) - { - /* Tx Transfer in progress */ - hcdc->TxState = 1; - - /* Transmit next packet */ - USBD_LL_Transmit(pdev, - CDC_IN_EP, - hcdc->TxBuffer, - hcdc->TxLength); - - return USBD_OK; - } - else - { - return USBD_BUSY; - } - } - else - { - return USBD_FAIL; - } -} - - -/** - * @brief USBD_CDC_ReceivePacket - * prepare OUT Endpoint for reception - * @param pdev: device instance - * @retval status - */ -uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) -{ - USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; - - /* Suspend or Resume USB Out process */ - if(pdev->pClassData != NULL) - { - if(pdev->dev_speed == USBD_SPEED_HIGH ) - { - /* Prepare Out endpoint to receive next packet */ - USBD_LL_PrepareReceive(pdev, - CDC_OUT_EP, - hcdc->RxBuffer, - CDC_DATA_HS_OUT_PACKET_SIZE); - } - else - { - /* Prepare Out endpoint to receive next packet */ - USBD_LL_PrepareReceive(pdev, - CDC_OUT_EP, - hcdc->RxBuffer, - CDC_DATA_FS_OUT_PACKET_SIZE); - } - return USBD_OK; - } - else - { - return USBD_FAIL; - } -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/** + ****************************************************************************** + * @file usbd_cdc.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the high layer firmware functions to manage the + * following functionalities of the USB CDC Class: + * - Initialization and Configuration of high and low layer + * - Enumeration as CDC Device (and enumeration for each implemented memory interface) + * - OUT/IN data transfer + * - Command IN transfer (class requests management) + * - Error management + * + * @verbatim + * + * =================================================================== + * CDC Class Driver Description + * =================================================================== + * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices + * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus + * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" + * This driver implements the following aspects of the specification: + * - Device descriptor management + * - Configuration descriptor management + * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) + * - Requests management (as described in section 6.2 in specification) + * - Abstract Control Model compliant + * - Union Functional collection (using 1 IN endpoint for control) + * - Data interface class + * + * These aspects may be enriched or modified for a specific user application. + * + * This driver doesn't implement the following aspects of the specification + * (but it is possible to manage these features with some modifications on this driver): + * - Any class-specific aspect relative to communication classes should be managed by user application. + * - All communication classes other than PSTN are not managed + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +#include "usbd_desc.h" +#include "usbd_ctlreq.h" +#include +#include + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ + + +static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev); + +static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); + +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length); + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = +{ + USB_LEN_DEV_QUALIFIER_DESC, + USB_DESC_TYPE_DEVICE_QUALIFIER, + 0x00, + 0x02, + 0x00, + 0x00, + 0x00, + 0x40, + 0x01, + 0x00, +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ + + +/* CDC interface class callbacks structure */ +USBD_ClassTypeDef USBD_CDC = +{ + USBD_CDC_Init, + USBD_CDC_DeInit, + USBD_CDC_Setup, + NULL, /* EP0_TxSent, */ + USBD_CDC_EP0_RxReady, + USBD_CDC_DataIn, + USBD_CDC_DataOut, + NULL, + NULL, + NULL, + USBD_CDC_GetHSCfgDesc, + USBD_CDC_GetFSCfgDesc, + USBD_CDC_GetOtherSpeedCfgDesc, + USBD_CDC_GetDeviceQualifierDescriptor, +}; + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0x10, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0x10, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + +__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + 0x09, /* bLength: Configuation Descriptor size */ + USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION, + USB_CDC_CONFIG_DESC_SIZ, + 0x00, + 0x02, /* bNumInterfaces: 2 interfaces */ + 0x01, /* bConfigurationValue: */ + 0x04, /* iConfiguration: */ + 0xC0, /* bmAttributes: */ + 0x32, /* MaxPower 100 mA */ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0xFF, /* bInterval: */ + + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00 /* bInterval */ +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Functions + * @{ + */ + +/** + * @brief USBD_CDC_Init + * Initialize the CDC interface + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + uint8_t ret = 0; + USBD_CDC_HandleTypeDef *hcdc; + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, + CDC_IN_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_HS_IN_PACKET_SIZE); + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, + CDC_OUT_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_HS_OUT_PACKET_SIZE); + + } + else + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, + CDC_IN_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_FS_IN_PACKET_SIZE); + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, + CDC_OUT_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + /* Open Command IN EP */ + USBD_LL_OpenEP(pdev, + CDC_CMD_EP, + USBD_EP_TYPE_INTR, + CDC_CMD_PACKET_SIZE); + + + pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef)); + + if(pdev->pClassData == NULL) + { + ret = 1; + } + else + { + hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Init physical Interface components */ + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init(); + + /* Init Xfer states */ + hcdc->TxState =0; + hcdc->RxState =0; + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + + + } + return ret; +} + +/** + * @brief USBD_CDC_Init + * DeInitialize the CDC layer + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + uint8_t ret = 0; + + /* Open EP IN */ + USBD_LL_CloseEP(pdev, + CDC_IN_EP); + + /* Open EP OUT */ + USBD_LL_CloseEP(pdev, + CDC_OUT_EP); + + /* Open Command IN EP */ + USBD_LL_CloseEP(pdev, + CDC_CMD_EP); + + + /* DeInit physical Interface components */ + if(pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit(); + USBD_free(pdev->pClassData); + pdev->pClassData = NULL; + } + + return ret; +} + +/** + * @brief USBD_CDC_Setup + * Handle the CDC specific requests + * @param pdev: instance + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + static uint8_t ifalt = 0; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS : + if (req->wLength) + { + if (req->bmRequest & 0x80) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t *)hcdc->data, + req->wLength); + USBD_CtlSendData (pdev, + (uint8_t *)hcdc->data, + req->wLength); + } + else + { + hcdc->CmdOpCode = req->bRequest; + hcdc->CmdLength = req->wLength; + + USBD_CtlPrepareRx (pdev, + (uint8_t *)hcdc->data, + req->wLength); + } + + } + else + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t*)req, + 0); + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_INTERFACE : + USBD_CtlSendData (pdev, + &ifalt, + 1); + break; + + case USB_REQ_SET_INTERFACE : + break; + } + + default: + break; + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_DataIn + * Data sent on non-control IN endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if(pdev->pClassData != NULL) + { + + hcdc->TxState = 0; + osSemaphoreRelease(sem_usb_tx); + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Get the received data length */ + hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum); + + /* USB data will be immediately processed, this allow next USB traffic being + NAKed till the end of the application Xfer */ + if(pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength); + + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + + + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF)) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, + (uint8_t *)hcdc->data, + hcdc->CmdLength); + hcdc->CmdOpCode = 0xFF; + + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_GetFSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_CfgFSDesc); + return USBD_CDC_CfgFSDesc; +} + +/** + * @brief USBD_CDC_GetHSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_CfgHSDesc); + return USBD_CDC_CfgHSDesc; +} + +/** + * @brief USBD_CDC_GetCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_OtherSpeedCfgDesc); + return USBD_CDC_OtherSpeedCfgDesc; +} + +/** +* @brief DeviceQualifierDescriptor +* return Device Qualifier descriptor +* @param length : pointer data length +* @retval pointer to descriptor buffer +*/ +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length) +{ + *length = sizeof (USBD_CDC_DeviceQualifierDesc); + return USBD_CDC_DeviceQualifierDesc; +} + +/** +* @brief USBD_CDC_RegisterInterface + * @param pdev: device instance + * @param fops: CD Interface callback + * @retval status + */ +uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops) +{ + uint8_t ret = USBD_FAIL; + + if(fops != NULL) + { + pdev->pUserData= fops; + ret = USBD_OK; + } + + return ret; +} + +/** + * @brief USBD_CDC_SetTxBuffer + * @param pdev: device instance + * @param pbuff: Tx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + hcdc->TxBuffer = pbuff; + hcdc->TxLength = length; + + return USBD_OK; +} + + +/** + * @brief USBD_CDC_SetRxBuffer + * @param pdev: device instance + * @param pbuff: Rx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + hcdc->RxBuffer = pbuff; + + return USBD_OK; +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if(pdev->pClassData != NULL) + { + if(hcdc->TxState == 0) + { + /* Tx Transfer in progress */ + hcdc->TxState = 1; + + /* Transmit next packet */ + USBD_LL_Transmit(pdev, + CDC_IN_EP, + hcdc->TxBuffer, + hcdc->TxLength); + + return USBD_OK; + } + else + { + return USBD_BUSY; + } + } + else + { + return USBD_FAIL; + } +} + + +/** + * @brief USBD_CDC_ReceivePacket + * prepare OUT Endpoint for reception + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Suspend or Resume USB Out process */ + if(pdev->pClassData != NULL) + { + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c b/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c index e764cbc7..7828403b 100644 --- a/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c +++ b/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c @@ -26,7 +26,7 @@ * *---------------------------------------------------------------------------- * - * Portions Copyright � 2016 STMicroelectronics International N.V. All rights reserved. + * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. * Portions Copyright (c) 2013 ARM LIMITED * All rights reserved. * Redistribution and use in source and binary forms, with or without diff --git a/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h b/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h index 1dfa5e26..09cdf273 100644 --- a/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h +++ b/Firmware/Board/v3/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h @@ -1,1071 +1,1071 @@ -/* ---------------------------------------------------------------------- - * $Date: 5. February 2013 - * $Revision: V1.02 - * - * Project: CMSIS-RTOS API - * Title: cmsis_os.h header file - * - * Version 0.02 - * Initial Proposal Phase - * Version 0.03 - * osKernelStart added, optional feature: main started as thread - * osSemaphores have standard behavior - * osTimerCreate does not start the timer, added osTimerStart - * osThreadPass is renamed to osThreadYield - * Version 1.01 - * Support for C++ interface - * - const attribute removed from the osXxxxDef_t typedef's - * - const attribute added to the osXxxxDef macros - * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete - * Added: osKernelInitialize - * Version 1.02 - * Control functions for short timeouts in microsecond resolution: - * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec - * Removed: osSignalGet - * - * - *---------------------------------------------------------------------------- - * - * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. - * Portions Copyright (c) 2013 ARM LIMITED - * All rights reserved. - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - Neither the name of ARM nor the names of its contributors may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - *---------------------------------------------------------------------------*/ - - /** - ****************************************************************************** - * @file cmsis_os.h - * @author MCD Application Team - * @date 13-July-2017 - * @brief Header of cmsis_os.c - * A new set of APIs are added in addition to existing ones, these APIs - * are specific to FreeRTOS. - ****************************************************************************** - * @attention - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -#include "FreeRTOS.h" -#include "task.h" -#include "timers.h" -#include "queue.h" -#include "semphr.h" -#include "event_groups.h" - -/** -\page cmsis_os_h Header File Template: cmsis_os.h - -The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS). -Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents -its implementation. - -The file cmsis_os.h contains: - - CMSIS-RTOS API function definitions - - struct definitions for parameters and return types - - status and priority values used by CMSIS-RTOS API functions - - macros for defining threads and other kernel objects - - -Name conventions and header file modifications - -All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions. -Definitions that are prefixed \b os_ are not used in the application code but local to this header file. -All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread. - -Definitions that are marked with CAN BE CHANGED can be adapted towards the needs of the actual CMSIS-RTOS implementation. -These definitions can be specific to the underlying RTOS kernel. - -Definitions that are marked with MUST REMAIN UNCHANGED cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer -compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation. - - -Function calls from interrupt service routines - -The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR): - - \ref osSignalSet - - \ref osSemaphoreRelease - - \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree - - \ref osMessagePut, \ref osMessageGet - - \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree - -Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called -from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector. - -Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time. -If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive. - - -Define and reference object definitions - -With \#define osObjectsExternal objects are defined as external symbols. This allows to create a consistent header file -that is used throughout a project as shown below: - -Header File -\code -#include // CMSIS RTOS header file - -// Thread definition -extern void thread_sample (void const *argument); // function prototype -osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100); - -// Pool definition -osPoolDef(MyPool, 10, long); -\endcode - - -This header file defines all objects when included in a C/C++ source file. When \#define osObjectsExternal is -present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be -used throughout the whole project. - -Example -\code -#include "osObjects.h" // Definition of the CMSIS-RTOS objects -\endcode - -\code -#define osObjectExternal // Objects will be defined as external symbols -#include "osObjects.h" // Reference to the CMSIS-RTOS objects -\endcode - -*/ - -#ifndef _CMSIS_OS_H -#define _CMSIS_OS_H - -/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version. -#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0]) - -/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number. -#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0]) - -/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS. -#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string - -/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS. -#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available -#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available -#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available -#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available -#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread -#define osFeature_Semaphore 1 ///< osFeature_Semaphore function: 1=available, 0=not available -#define osFeature_Wait 0 ///< osWait function: 1=available, 0=not available -#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available - -#ifdef __cplusplus -extern "C" -{ -#endif - - -// ==== Enumeration, structures, defines ==== - -/// Priority used for thread control. -/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS. -typedef enum { - osPriorityIdle = -3, ///< priority: idle (lowest) - osPriorityLow = -2, ///< priority: low - osPriorityBelowNormal = -1, ///< priority: below normal - osPriorityNormal = 0, ///< priority: normal (default) - osPriorityAboveNormal = +1, ///< priority: above normal - osPriorityHigh = +2, ///< priority: high - osPriorityRealtime = +3, ///< priority: realtime (highest) - osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority -} osPriority; - -/// Timeout value. -/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS. -#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value - -/// Status code values returned by CMSIS-RTOS functions. -/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS. -typedef enum { - osOK = 0, ///< function completed; no error or event occurred. - osEventSignal = 0x08, ///< function completed; signal event occurred. - osEventMessage = 0x10, ///< function completed; message event occurred. - osEventMail = 0x20, ///< function completed; mail event occurred. - osEventTimeout = 0x40, ///< function completed; timeout occurred. - osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object. - osErrorResource = 0x81, ///< resource not available: a specified resource was not available. - osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period. - osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines. - osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object. - osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority. - osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation. - osErrorValue = 0x86, ///< value of a parameter is out of range. - osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits. - os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization. -} osStatus; - -#if ( INCLUDE_eTaskGetState == 1 ) -/* Thread state returned by osThreadGetState */ -typedef enum { - osThreadRunning = 0x0, /* A thread is querying the state of itself, so must be running. */ - osThreadReady = 0x1 , /* The thread being queried is in a read or pending ready list. */ - osThreadBlocked = 0x2, /* The thread being queried is in the Blocked state. */ - osThreadSuspended = 0x3, /* The thread being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */ - osThreadDeleted = 0x4, /* The thread being queried has been deleted, but its TCB has not yet been freed. */ - osThreadError = 0x7FFFFFFF -} osThreadState; -#endif /* INCLUDE_eTaskGetState */ - -/// Timer type value for the timer definition. -/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS. -typedef enum { - osTimerOnce = 0, ///< one-shot timer - osTimerPeriodic = 1 ///< repeating timer -} os_timer_type; - -/// Entry point of a thread. -/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS. -typedef void (*os_pthread) (void const *argument); - -/// Entry point of a timer call back function. -/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS. -typedef void (*os_ptimer) (void const *argument); - -// >>> the following data type definitions may shall adapted towards a specific RTOS - -/// Thread ID identifies the thread (pointer to a thread control block). -/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS. -typedef TaskHandle_t osThreadId; - -/// Timer ID identifies the timer (pointer to a timer control block). -/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS. -typedef TimerHandle_t osTimerId; - -/// Mutex ID identifies the mutex (pointer to a mutex control block). -/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS. -typedef SemaphoreHandle_t osMutexId; - -/// Semaphore ID identifies the semaphore (pointer to a semaphore control block). -/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS. -typedef SemaphoreHandle_t osSemaphoreId; - -/// Pool ID identifies the memory pool (pointer to a memory pool control block). -/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS. -typedef struct os_pool_cb *osPoolId; - -/// Message ID identifies the message queue (pointer to a message queue control block). -/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS. -typedef QueueHandle_t osMessageQId; - -/// Mail ID identifies the mail queue (pointer to a mail queue control block). -/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS. -typedef struct os_mailQ_cb *osMailQId; - - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - -typedef StaticTask_t osStaticThreadDef_t; -typedef StaticTimer_t osStaticTimerDef_t; -typedef StaticSemaphore_t osStaticMutexDef_t; -typedef StaticSemaphore_t osStaticSemaphoreDef_t; -typedef StaticQueue_t osStaticMessageQDef_t; - -#endif - - - - -/// Thread Definition structure contains startup information of a thread. -/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS. -typedef struct os_thread_def { - char *name; ///< Thread name - os_pthread pthread; ///< start address of thread function - osPriority tpriority; ///< initial thread priority - uint32_t instances; ///< maximum number of instances of that thread function - uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - uint32_t *buffer; ///< stack buffer for static allocation; NULL for dynamic allocation - osStaticThreadDef_t *controlblock; ///< control block to hold thread's data for static allocation; NULL for dynamic allocation -#endif -} osThreadDef_t; - -/// Timer Definition structure contains timer parameters. -/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS. -typedef struct os_timer_def { - os_ptimer ptimer; ///< start address of a timer function -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - osStaticTimerDef_t *controlblock; ///< control block to hold timer's data for static allocation; NULL for dynamic allocation -#endif -} osTimerDef_t; - -/// Mutex Definition structure contains setup information for a mutex. -/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS. -typedef struct os_mutex_def { - uint32_t dummy; ///< dummy value. -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - osStaticMutexDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation -#endif -} osMutexDef_t; - -/// Semaphore Definition structure contains setup information for a semaphore. -/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS. -typedef struct os_semaphore_def { - uint32_t dummy; ///< dummy value. -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - osStaticSemaphoreDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation -#endif -} osSemaphoreDef_t; - -/// Definition structure for memory block allocation. -/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS. -typedef struct os_pool_def { - uint32_t pool_sz; ///< number of items (elements) in the pool - uint32_t item_sz; ///< size of an item - void *pool; ///< pointer to memory for pool -} osPoolDef_t; - -/// Definition structure for message queue. -/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS. -typedef struct os_messageQ_def { - uint32_t queue_sz; ///< number of elements in the queue - uint32_t item_sz; ///< size of an item -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - uint8_t *buffer; ///< buffer for static allocation; NULL for dynamic allocation - osStaticMessageQDef_t *controlblock; ///< control block to hold queue's data for static allocation; NULL for dynamic allocation -#endif - //void *pool; ///< memory array for messages -} osMessageQDef_t; - -/// Definition structure for mail queue. -/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS. -typedef struct os_mailQ_def { - uint32_t queue_sz; ///< number of elements in the queue - uint32_t item_sz; ///< size of an item - struct os_mailQ_cb **cb; -} osMailQDef_t; - -/// Event structure contains detailed information about an event. -/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS. -/// However the struct may be extended at the end. -typedef struct { - osStatus status; ///< status code: event or error information - union { - uint32_t v; ///< message as 32-bit value - void *p; ///< message or mail as void pointer - int32_t signals; ///< signal flags - } value; ///< event value - union { - osMailQId mail_id; ///< mail id obtained by \ref osMailCreate - osMessageQId message_id; ///< message id obtained by \ref osMessageCreate - } def; ///< event definition -} osEvent; - - -// ==== Kernel Control Functions ==== - -/// Initialize the RTOS Kernel for creating objects. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. -osStatus osKernelInitialize (void); - -/// Start the RTOS Kernel. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. -osStatus osKernelStart (void); - -/// Check if the RTOS kernel is already started. -/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. -/// \return 0 RTOS is not started, 1 RTOS is started. -int32_t osKernelRunning(void); - -#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available - -/// Get the RTOS kernel system timer counter -/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. -/// \return RTOS kernel system timer as 32-bit value -uint32_t osKernelSysTick (void); - -/// The RTOS kernel system timer frequency in Hz -/// \note Reflects the system timer setting and is typically defined in a configuration file. -#define osKernelSysTickFrequency (configTICK_RATE_HZ) - -/// Convert a microseconds value to a RTOS kernel system timer value. -/// \param microsec time value in microseconds. -/// \return time value normalized to the \ref osKernelSysTickFrequency -#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000) - -#endif // System Timer available - -// ==== Thread Management ==== - -/// Create a Thread Definition with function, priority, and stack requirements. -/// \param name name of the thread function. -/// \param priority initial priority of the thread function. -/// \param instances number of possible thread instances. -/// \param stacksz stack size (in bytes) requirements for the thread function. -/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osThreadDef(name, thread, priority, instances, stacksz) \ -extern const osThreadDef_t os_thread_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osThreadDef(name, thread, priority, instances, stacksz) \ -const osThreadDef_t os_thread_def_##name = \ -{ #name, (thread), (priority), (instances), (stacksz), NULL, NULL } - -#define osThreadStaticDef(name, thread, priority, instances, stacksz, buffer, control) \ -const osThreadDef_t os_thread_def_##name = \ -{ #name, (thread), (priority), (instances), (stacksz), (buffer), (control) } -#else //configSUPPORT_STATIC_ALLOCATION == 0 - -#define osThreadDef(name, thread, priority, instances, stacksz) \ -const osThreadDef_t os_thread_def_##name = \ -{ #name, (thread), (priority), (instances), (stacksz)} -#endif -#endif - -/// Access a Thread definition. -/// \param name name of the thread definition object. -/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osThread(name) \ -&os_thread_def_##name - -/// Create a thread and add it to Active Threads and set it to state READY. -/// \param[in] thread_def thread definition referenced with \ref osThread. -/// \param[in] argument pointer that is passed to the thread function as start argument. -/// \return thread ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. -osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument); - -/// Return the thread ID of the current running thread. -/// \return thread ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. -osThreadId osThreadGetId (void); - -/// Terminate execution of a thread and remove it from Active Threads. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. -osStatus osThreadTerminate (osThreadId thread_id); - -/// Pass control to next thread that is in state \b READY. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. -osStatus osThreadYield (void); - -/// Change priority of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \param[in] priority new priority value for the thread function. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. -osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority); - -/// Get current priority of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \return current priority value of the thread function. -/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. -osPriority osThreadGetPriority (osThreadId thread_id); - - -// ==== Generic Wait Functions ==== - -/// Wait for Timeout (Time Delay). -/// \param[in] millisec time delay value -/// \return status code that indicates the execution status of the function. -osStatus osDelay (uint32_t millisec); - -#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available - -/// Wait for Signal, Message, Mail, or Timeout. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return event that contains signal, message, or mail information or error code. -/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. -osEvent osWait (uint32_t millisec); - -#endif // Generic Wait available - - -// ==== Timer Management Functions ==== -/// Define a Timer object. -/// \param name name of the timer object. -/// \param function name of the timer call back function. -/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osTimerDef(name, function) \ -extern const osTimerDef_t os_timer_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osTimerDef(name, function) \ -const osTimerDef_t os_timer_def_##name = \ -{ (function), NULL } - -#define osTimerStaticDef(name, function, control) \ -const osTimerDef_t os_timer_def_##name = \ -{ (function), (control) } -#else //configSUPPORT_STATIC_ALLOCATION == 0 -#define osTimerDef(name, function) \ -const osTimerDef_t os_timer_def_##name = \ -{ (function) } -#endif -#endif - -/// Access a Timer definition. -/// \param name name of the timer object. -/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osTimer(name) \ -&os_timer_def_##name - -/// Create a timer. -/// \param[in] timer_def timer object referenced with \ref osTimer. -/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. -/// \param[in] argument argument to the timer call back function. -/// \return timer ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. -osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument); - -/// Start or restart a timer. -/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. -/// \param[in] millisec time delay value of the timer. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. -osStatus osTimerStart (osTimerId timer_id, uint32_t millisec); - -/// Stop the timer. -/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. -osStatus osTimerStop (osTimerId timer_id); - -/// Delete a timer that was created by \ref osTimerCreate. -/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. -osStatus osTimerDelete (osTimerId timer_id); - - -// ==== Signal Management ==== - -/// Set the specified Signal Flags of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \param[in] signals specifies the signal flags of the thread that should be set. -/// \return osOK if successful, osErrorOS if failed. -/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. -int32_t osSignalSet (osThreadId thread_id, int32_t signals); - -/// Clear the specified Signal Flags of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \param[in] signals specifies the signal flags of the thread that shall be cleared. -/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. -/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. -int32_t osSignalClear (osThreadId thread_id, int32_t signals); - -/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. -/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return event flag information or error code. -/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. -osEvent osSignalWait (int32_t signals, uint32_t millisec); - - -// ==== Mutex Management ==== - -/// Define a Mutex. -/// \param name name of the mutex object. -/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osMutexDef(name) \ -extern const osMutexDef_t os_mutex_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osMutexDef(name) \ -const osMutexDef_t os_mutex_def_##name = { 0, NULL } - -#define osMutexStaticDef(name, control) \ -const osMutexDef_t os_mutex_def_##name = { 0, (control) } -#else //configSUPPORT_STATIC_ALLOCATION == 0 -#define osMutexDef(name) \ -const osMutexDef_t os_mutex_def_##name = { 0 } - -#endif - -#endif - -/// Access a Mutex definition. -/// \param name name of the mutex object. -/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osMutex(name) \ -&os_mutex_def_##name - -/// Create and Initialize a Mutex object. -/// \param[in] mutex_def mutex definition referenced with \ref osMutex. -/// \return mutex ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. -osMutexId osMutexCreate (const osMutexDef_t *mutex_def); - -/// Wait until a Mutex becomes available. -/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. -osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec); - -/// Release a Mutex that was obtained by \ref osMutexWait. -/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. -osStatus osMutexRelease (osMutexId mutex_id); - -/// Delete a Mutex that was created by \ref osMutexCreate. -/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. -osStatus osMutexDelete (osMutexId mutex_id); - - -// ==== Semaphore Management Functions ==== - -#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available - -/// Define a Semaphore object. -/// \param name name of the semaphore object. -/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osSemaphoreDef(name) \ -extern const osSemaphoreDef_t os_semaphore_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osSemaphoreDef(name) \ -const osSemaphoreDef_t os_semaphore_def_##name = { 0, NULL } - -#define osSemaphoreStaticDef(name, control) \ -const osSemaphoreDef_t os_semaphore_def_##name = { 0, (control) } - -#else //configSUPPORT_STATIC_ALLOCATION == 0 -#define osSemaphoreDef(name) \ -const osSemaphoreDef_t os_semaphore_def_##name = { 0 } -#endif -#endif - -/// Access a Semaphore definition. -/// \param name name of the semaphore object. -/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osSemaphore(name) \ -&os_semaphore_def_##name - -/// Create and Initialize a Semaphore object used for managing resources. -/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore. -/// \param[in] count number of available resources. -/// \return semaphore ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. -osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count); - -/// Wait until a Semaphore token becomes available. -/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. -osStatus osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec); - -/// Release a Semaphore token. -/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. -osStatus osSemaphoreRelease (osSemaphoreId semaphore_id); - -/// Delete a Semaphore that was created by \ref osSemaphoreCreate. -/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. -osStatus osSemaphoreDelete (osSemaphoreId semaphore_id); - -#endif // Semaphore available - - -// ==== Memory Pool Management Functions ==== - -#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available - -/// \brief Define a Memory Pool. -/// \param name name of the memory pool. -/// \param no maximum number of blocks (objects) in the memory pool. -/// \param type data type of a single block (object). -/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osPoolDef(name, no, type) \ -extern const osPoolDef_t os_pool_def_##name -#else // define the object -#define osPoolDef(name, no, type) \ -const osPoolDef_t os_pool_def_##name = \ -{ (no), sizeof(type), NULL } -#endif - -/// \brief Access a Memory Pool definition. -/// \param name name of the memory pool -/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osPool(name) \ -&os_pool_def_##name - -/// Create and Initialize a memory pool. -/// \param[in] pool_def memory pool definition referenced with \ref osPool. -/// \return memory pool ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. -osPoolId osPoolCreate (const osPoolDef_t *pool_def); - -/// Allocate a memory block from a memory pool. -/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. -/// \return address of the allocated memory block or NULL in case of no memory available. -/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. -void *osPoolAlloc (osPoolId pool_id); - -/// Allocate a memory block from a memory pool and set memory block to zero. -/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. -/// \return address of the allocated memory block or NULL in case of no memory available. -/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. -void *osPoolCAlloc (osPoolId pool_id); - -/// Return an allocated memory block back to a specific memory pool. -/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. -/// \param[in] block address of the allocated memory block that is returned to the memory pool. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. -osStatus osPoolFree (osPoolId pool_id, void *block); - -#endif // Memory Pool Management available - - -// ==== Message Queue Management Functions ==== - -#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available - -/// \brief Create a Message Queue Definition. -/// \param name name of the queue. -/// \param queue_sz maximum number of messages in the queue. -/// \param type data type of a single message element (for debugger). -/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osMessageQDef(name, queue_sz, type) \ -extern const osMessageQDef_t os_messageQ_def_##name -#else // define the object -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osMessageQDef(name, queue_sz, type) \ -const osMessageQDef_t os_messageQ_def_##name = \ -{ (queue_sz), sizeof (type), NULL, NULL } - -#define osMessageQStaticDef(name, queue_sz, type, buffer, control) \ -const osMessageQDef_t os_messageQ_def_##name = \ -{ (queue_sz), sizeof (type) , (buffer), (control)} -#else //configSUPPORT_STATIC_ALLOCATION == 1 -#define osMessageQDef(name, queue_sz, type) \ -const osMessageQDef_t os_messageQ_def_##name = \ -{ (queue_sz), sizeof (type) } - -#endif -#endif - -/// \brief Access a Message Queue Definition. -/// \param name name of the queue -/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osMessageQ(name) \ -&os_messageQ_def_##name - -/// Create and Initialize a Message Queue. -/// \param[in] queue_def queue definition referenced with \ref osMessageQ. -/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. -/// \return message queue ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. -osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id); - -/// Put a Message to a Queue. -/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. -/// \param[in] info message information. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. -osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec); - -/// Get a Message or Wait for a Message from a Queue. -/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return event information that includes status code. -/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. -osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec); - -#endif // Message Queues available - - -// ==== Mail Queue Management Functions ==== - -#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available - -/// \brief Create a Mail Queue Definition. -/// \param name name of the queue -/// \param queue_sz maximum number of messages in queue -/// \param type data type of a single message element -/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osMailQDef(name, queue_sz, type) \ -extern struct os_mailQ_cb *os_mailQ_cb_##name \ -extern osMailQDef_t os_mailQ_def_##name -#else // define the object -#define osMailQDef(name, queue_sz, type) \ -struct os_mailQ_cb *os_mailQ_cb_##name; \ -const osMailQDef_t os_mailQ_def_##name = \ -{ (queue_sz), sizeof (type), (&os_mailQ_cb_##name) } -#endif - -/// \brief Access a Mail Queue Definition. -/// \param name name of the queue -/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osMailQ(name) \ -&os_mailQ_def_##name - -/// Create and Initialize mail queue. -/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ -/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. -/// \return mail queue ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. -osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id); - -/// Allocate a memory block from a mail. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return pointer to memory block that can be filled with mail or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. -void *osMailAlloc (osMailQId queue_id, uint32_t millisec); - -/// Allocate a memory block from a mail and set memory block to zero. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return pointer to memory block that can be filled with mail or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. -void *osMailCAlloc (osMailQId queue_id, uint32_t millisec); - -/// Put a mail to a queue. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. -osStatus osMailPut (osMailQId queue_id, void *mail); - -/// Get a mail from a queue. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return event that contains mail information or error code. -/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. -osEvent osMailGet (osMailQId queue_id, uint32_t millisec); - -/// Free a memory block from a mail. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. -osStatus osMailFree (osMailQId queue_id, void *mail); - -#endif // Mail Queues available - -/*************************** Additional specific APIs to Free RTOS ************/ -/** -* @brief Handles the tick increment -* @param none. -* @retval none. -*/ -void osSystickHandler(void); - -#if ( INCLUDE_eTaskGetState == 1 ) -/** -* @brief Obtain the state of any thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval the stae of the thread, states are encoded by the osThreadState enumerated type. -*/ -osThreadState osThreadGetState(osThreadId thread_id); -#endif /* INCLUDE_eTaskGetState */ - -#if ( INCLUDE_eTaskGetState == 1 ) -/** -* @brief Check if a thread is already suspended or not. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ - -osStatus osThreadIsSuspended(osThreadId thread_id); - -#endif /* INCLUDE_eTaskGetState */ - -/** -* @brief Suspend execution of a thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadSuspend (osThreadId thread_id); - -/** -* @brief Resume execution of a suspended thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadResume (osThreadId thread_id); - -/** -* @brief Suspend execution of a all active threads. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadSuspendAll (void); - -/** -* @brief Resume execution of a all suspended threads. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadResumeAll (void); - -/** -* @brief Delay a task until a specified time -* @param PreviousWakeTime Pointer to a variable that holds the time at which the -* task was last unblocked. PreviousWakeTime must be initialised with the current time -* prior to its first use (PreviousWakeTime = osKernelSysTick() ) -* @param millisec time delay value -* @retval status code that indicates the execution status of the function. -*/ -osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec); - -/** -* @brief Abort the delay for a specific thread -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId -* @retval status code that indicates the execution status of the function. -*/ -osStatus osAbortDelay(osThreadId thread_id); - -/** -* @brief Lists all the current threads, along with their current state -* and stack usage high water mark. -* @param buffer A buffer into which the above mentioned details -* will be written -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadList (uint8_t *buffer); - -/** -* @brief Receive an item from a queue without removing the item from the queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval event information that includes status code. -*/ -osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec); - -/** -* @brief Get the number of messaged stored in a queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval number of messages stored in a queue. -*/ -uint32_t osMessageWaiting(osMessageQId queue_id); - -/** -* @brief Get the available space in a message queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval available space in a message queue. -*/ -uint32_t osMessageAvailableSpace(osMessageQId queue_id); - -/** -* @brief Delete a Message Queue -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osMessageDelete (osMessageQId queue_id); - -/** -* @brief Create and Initialize a Recursive Mutex -* @param mutex_def mutex definition referenced with \ref osMutex. -* @retval mutex ID for reference by other functions or NULL in case of error.. -*/ -osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def); - -/** -* @brief Release a Recursive Mutex -* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osRecursiveMutexRelease (osMutexId mutex_id); - -/** -* @brief Release a Recursive Mutex -* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec); - -/** -* @brief Returns the current count value of a counting semaphore -* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate. -* @retval count value -*/ -uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id); - -#ifdef __cplusplus -} -#endif - -#endif // _CMSIS_OS_H +/* ---------------------------------------------------------------------- + * $Date: 5. February 2013 + * $Revision: V1.02 + * + * Project: CMSIS-RTOS API + * Title: cmsis_os.h header file + * + * Version 0.02 + * Initial Proposal Phase + * Version 0.03 + * osKernelStart added, optional feature: main started as thread + * osSemaphores have standard behavior + * osTimerCreate does not start the timer, added osTimerStart + * osThreadPass is renamed to osThreadYield + * Version 1.01 + * Support for C++ interface + * - const attribute removed from the osXxxxDef_t typedef's + * - const attribute added to the osXxxxDef macros + * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete + * Added: osKernelInitialize + * Version 1.02 + * Control functions for short timeouts in microsecond resolution: + * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec + * Removed: osSignalGet + * + * + *---------------------------------------------------------------------------- + * + * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. + * Portions Copyright (c) 2013 ARM LIMITED + * All rights reserved. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * - Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + *---------------------------------------------------------------------------*/ + + /** + ****************************************************************************** + * @file cmsis_os.h + * @author MCD Application Team + * @date 13-July-2017 + * @brief Header of cmsis_os.c + * A new set of APIs are added in addition to existing ones, these APIs + * are specific to FreeRTOS. + ****************************************************************************** + * @attention + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "queue.h" +#include "semphr.h" +#include "event_groups.h" + +/** +\page cmsis_os_h Header File Template: cmsis_os.h + +The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS). +Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents +its implementation. + +The file cmsis_os.h contains: + - CMSIS-RTOS API function definitions + - struct definitions for parameters and return types + - status and priority values used by CMSIS-RTOS API functions + - macros for defining threads and other kernel objects + + +Name conventions and header file modifications + +All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions. +Definitions that are prefixed \b os_ are not used in the application code but local to this header file. +All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread. + +Definitions that are marked with CAN BE CHANGED can be adapted towards the needs of the actual CMSIS-RTOS implementation. +These definitions can be specific to the underlying RTOS kernel. + +Definitions that are marked with MUST REMAIN UNCHANGED cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer +compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation. + + +Function calls from interrupt service routines + +The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR): + - \ref osSignalSet + - \ref osSemaphoreRelease + - \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree + - \ref osMessagePut, \ref osMessageGet + - \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree + +Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called +from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector. + +Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time. +If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive. + + +Define and reference object definitions + +With \#define osObjectsExternal objects are defined as external symbols. This allows to create a consistent header file +that is used throughout a project as shown below: + +Header File +\code +#include // CMSIS RTOS header file + +// Thread definition +extern void thread_sample (void const *argument); // function prototype +osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100); + +// Pool definition +osPoolDef(MyPool, 10, long); +\endcode + + +This header file defines all objects when included in a C/C++ source file. When \#define osObjectsExternal is +present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be +used throughout the whole project. + +Example +\code +#include "osObjects.h" // Definition of the CMSIS-RTOS objects +\endcode + +\code +#define osObjectExternal // Objects will be defined as external symbols +#include "osObjects.h" // Reference to the CMSIS-RTOS objects +\endcode + +*/ + +#ifndef _CMSIS_OS_H +#define _CMSIS_OS_H + +/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version. +#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0]) + +/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number. +#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0]) + +/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS. +#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string + +/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS. +#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available +#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available +#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available +#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available +#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread +#define osFeature_Semaphore 1 ///< osFeature_Semaphore function: 1=available, 0=not available +#define osFeature_Wait 0 ///< osWait function: 1=available, 0=not available +#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available + +#ifdef __cplusplus +extern "C" +{ +#endif + + +// ==== Enumeration, structures, defines ==== + +/// Priority used for thread control. +/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS. +typedef enum { + osPriorityIdle = -3, ///< priority: idle (lowest) + osPriorityLow = -2, ///< priority: low + osPriorityBelowNormal = -1, ///< priority: below normal + osPriorityNormal = 0, ///< priority: normal (default) + osPriorityAboveNormal = +1, ///< priority: above normal + osPriorityHigh = +2, ///< priority: high + osPriorityRealtime = +3, ///< priority: realtime (highest) + osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority +} osPriority; + +/// Timeout value. +/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS. +#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value + +/// Status code values returned by CMSIS-RTOS functions. +/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS. +typedef enum { + osOK = 0, ///< function completed; no error or event occurred. + osEventSignal = 0x08, ///< function completed; signal event occurred. + osEventMessage = 0x10, ///< function completed; message event occurred. + osEventMail = 0x20, ///< function completed; mail event occurred. + osEventTimeout = 0x40, ///< function completed; timeout occurred. + osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object. + osErrorResource = 0x81, ///< resource not available: a specified resource was not available. + osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period. + osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines. + osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object. + osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority. + osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation. + osErrorValue = 0x86, ///< value of a parameter is out of range. + osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits. + os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization. +} osStatus; + +#if ( INCLUDE_eTaskGetState == 1 ) +/* Thread state returned by osThreadGetState */ +typedef enum { + osThreadRunning = 0x0, /* A thread is querying the state of itself, so must be running. */ + osThreadReady = 0x1 , /* The thread being queried is in a read or pending ready list. */ + osThreadBlocked = 0x2, /* The thread being queried is in the Blocked state. */ + osThreadSuspended = 0x3, /* The thread being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */ + osThreadDeleted = 0x4, /* The thread being queried has been deleted, but its TCB has not yet been freed. */ + osThreadError = 0x7FFFFFFF +} osThreadState; +#endif /* INCLUDE_eTaskGetState */ + +/// Timer type value for the timer definition. +/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS. +typedef enum { + osTimerOnce = 0, ///< one-shot timer + osTimerPeriodic = 1 ///< repeating timer +} os_timer_type; + +/// Entry point of a thread. +/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS. +typedef void (*os_pthread) (void const *argument); + +/// Entry point of a timer call back function. +/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS. +typedef void (*os_ptimer) (void const *argument); + +// >>> the following data type definitions may shall adapted towards a specific RTOS + +/// Thread ID identifies the thread (pointer to a thread control block). +/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS. +typedef TaskHandle_t osThreadId; + +/// Timer ID identifies the timer (pointer to a timer control block). +/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS. +typedef TimerHandle_t osTimerId; + +/// Mutex ID identifies the mutex (pointer to a mutex control block). +/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS. +typedef SemaphoreHandle_t osMutexId; + +/// Semaphore ID identifies the semaphore (pointer to a semaphore control block). +/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS. +typedef SemaphoreHandle_t osSemaphoreId; + +/// Pool ID identifies the memory pool (pointer to a memory pool control block). +/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_pool_cb *osPoolId; + +/// Message ID identifies the message queue (pointer to a message queue control block). +/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS. +typedef QueueHandle_t osMessageQId; + +/// Mail ID identifies the mail queue (pointer to a mail queue control block). +/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_mailQ_cb *osMailQId; + + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + +typedef StaticTask_t osStaticThreadDef_t; +typedef StaticTimer_t osStaticTimerDef_t; +typedef StaticSemaphore_t osStaticMutexDef_t; +typedef StaticSemaphore_t osStaticSemaphoreDef_t; +typedef StaticQueue_t osStaticMessageQDef_t; + +#endif + + + + +/// Thread Definition structure contains startup information of a thread. +/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS. +typedef struct os_thread_def { + char *name; ///< Thread name + os_pthread pthread; ///< start address of thread function + osPriority tpriority; ///< initial thread priority + uint32_t instances; ///< maximum number of instances of that thread function + uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + uint32_t *buffer; ///< stack buffer for static allocation; NULL for dynamic allocation + osStaticThreadDef_t *controlblock; ///< control block to hold thread's data for static allocation; NULL for dynamic allocation +#endif +} osThreadDef_t; + +/// Timer Definition structure contains timer parameters. +/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS. +typedef struct os_timer_def { + os_ptimer ptimer; ///< start address of a timer function +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + osStaticTimerDef_t *controlblock; ///< control block to hold timer's data for static allocation; NULL for dynamic allocation +#endif +} osTimerDef_t; + +/// Mutex Definition structure contains setup information for a mutex. +/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS. +typedef struct os_mutex_def { + uint32_t dummy; ///< dummy value. +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + osStaticMutexDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation +#endif +} osMutexDef_t; + +/// Semaphore Definition structure contains setup information for a semaphore. +/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS. +typedef struct os_semaphore_def { + uint32_t dummy; ///< dummy value. +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + osStaticSemaphoreDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation +#endif +} osSemaphoreDef_t; + +/// Definition structure for memory block allocation. +/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS. +typedef struct os_pool_def { + uint32_t pool_sz; ///< number of items (elements) in the pool + uint32_t item_sz; ///< size of an item + void *pool; ///< pointer to memory for pool +} osPoolDef_t; + +/// Definition structure for message queue. +/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS. +typedef struct os_messageQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + uint8_t *buffer; ///< buffer for static allocation; NULL for dynamic allocation + osStaticMessageQDef_t *controlblock; ///< control block to hold queue's data for static allocation; NULL for dynamic allocation +#endif + //void *pool; ///< memory array for messages +} osMessageQDef_t; + +/// Definition structure for mail queue. +/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS. +typedef struct os_mailQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item + struct os_mailQ_cb **cb; +} osMailQDef_t; + +/// Event structure contains detailed information about an event. +/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS. +/// However the struct may be extended at the end. +typedef struct { + osStatus status; ///< status code: event or error information + union { + uint32_t v; ///< message as 32-bit value + void *p; ///< message or mail as void pointer + int32_t signals; ///< signal flags + } value; ///< event value + union { + osMailQId mail_id; ///< mail id obtained by \ref osMailCreate + osMessageQId message_id; ///< message id obtained by \ref osMessageCreate + } def; ///< event definition +} osEvent; + + +// ==== Kernel Control Functions ==== + +/// Initialize the RTOS Kernel for creating objects. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. +osStatus osKernelInitialize (void); + +/// Start the RTOS Kernel. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. +osStatus osKernelStart (void); + +/// Check if the RTOS kernel is already started. +/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. +/// \return 0 RTOS is not started, 1 RTOS is started. +int32_t osKernelRunning(void); + +#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available + +/// Get the RTOS kernel system timer counter +/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. +/// \return RTOS kernel system timer as 32-bit value +uint32_t osKernelSysTick (void); + +/// The RTOS kernel system timer frequency in Hz +/// \note Reflects the system timer setting and is typically defined in a configuration file. +#define osKernelSysTickFrequency (configTICK_RATE_HZ) + +/// Convert a microseconds value to a RTOS kernel system timer value. +/// \param microsec time value in microseconds. +/// \return time value normalized to the \ref osKernelSysTickFrequency +#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000) + +#endif // System Timer available + +// ==== Thread Management ==== + +/// Create a Thread Definition with function, priority, and stack requirements. +/// \param name name of the thread function. +/// \param priority initial priority of the thread function. +/// \param instances number of possible thread instances. +/// \param stacksz stack size (in bytes) requirements for the thread function. +/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osThreadDef(name, thread, priority, instances, stacksz) \ +extern const osThreadDef_t os_thread_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osThreadDef(name, thread, priority, instances, stacksz) \ +const osThreadDef_t os_thread_def_##name = \ +{ #name, (thread), (priority), (instances), (stacksz), NULL, NULL } + +#define osThreadStaticDef(name, thread, priority, instances, stacksz, buffer, control) \ +const osThreadDef_t os_thread_def_##name = \ +{ #name, (thread), (priority), (instances), (stacksz), (buffer), (control) } +#else //configSUPPORT_STATIC_ALLOCATION == 0 + +#define osThreadDef(name, thread, priority, instances, stacksz) \ +const osThreadDef_t os_thread_def_##name = \ +{ #name, (thread), (priority), (instances), (stacksz)} +#endif +#endif + +/// Access a Thread definition. +/// \param name name of the thread definition object. +/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osThread(name) \ +&os_thread_def_##name + +/// Create a thread and add it to Active Threads and set it to state READY. +/// \param[in] thread_def thread definition referenced with \ref osThread. +/// \param[in] argument pointer that is passed to the thread function as start argument. +/// \return thread ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. +osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument); + +/// Return the thread ID of the current running thread. +/// \return thread ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. +osThreadId osThreadGetId (void); + +/// Terminate execution of a thread and remove it from Active Threads. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. +osStatus osThreadTerminate (osThreadId thread_id); + +/// Pass control to next thread that is in state \b READY. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. +osStatus osThreadYield (void); + +/// Change priority of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] priority new priority value for the thread function. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. +osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority); + +/// Get current priority of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return current priority value of the thread function. +/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. +osPriority osThreadGetPriority (osThreadId thread_id); + + +// ==== Generic Wait Functions ==== + +/// Wait for Timeout (Time Delay). +/// \param[in] millisec time delay value +/// \return status code that indicates the execution status of the function. +osStatus osDelay (uint32_t millisec); + +#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available + +/// Wait for Signal, Message, Mail, or Timeout. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return event that contains signal, message, or mail information or error code. +/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. +osEvent osWait (uint32_t millisec); + +#endif // Generic Wait available + + +// ==== Timer Management Functions ==== +/// Define a Timer object. +/// \param name name of the timer object. +/// \param function name of the timer call back function. +/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osTimerDef(name, function) \ +extern const osTimerDef_t os_timer_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osTimerDef(name, function) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function), NULL } + +#define osTimerStaticDef(name, function, control) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function), (control) } +#else //configSUPPORT_STATIC_ALLOCATION == 0 +#define osTimerDef(name, function) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function) } +#endif +#endif + +/// Access a Timer definition. +/// \param name name of the timer object. +/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osTimer(name) \ +&os_timer_def_##name + +/// Create a timer. +/// \param[in] timer_def timer object referenced with \ref osTimer. +/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. +/// \param[in] argument argument to the timer call back function. +/// \return timer ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. +osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument); + +/// Start or restart a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \param[in] millisec time delay value of the timer. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. +osStatus osTimerStart (osTimerId timer_id, uint32_t millisec); + +/// Stop the timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. +osStatus osTimerStop (osTimerId timer_id); + +/// Delete a timer that was created by \ref osTimerCreate. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. +osStatus osTimerDelete (osTimerId timer_id); + + +// ==== Signal Management ==== + +/// Set the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that should be set. +/// \return osOK if successful, osErrorOS if failed. +/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. +int32_t osSignalSet (osThreadId thread_id, int32_t signals); + +/// Clear the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that shall be cleared. +/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. +int32_t osSignalClear (osThreadId thread_id, int32_t signals); + +/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. +/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return event flag information or error code. +/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. +osEvent osSignalWait (int32_t signals, uint32_t millisec); + + +// ==== Mutex Management ==== + +/// Define a Mutex. +/// \param name name of the mutex object. +/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMutexDef(name) \ +extern const osMutexDef_t os_mutex_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osMutexDef(name) \ +const osMutexDef_t os_mutex_def_##name = { 0, NULL } + +#define osMutexStaticDef(name, control) \ +const osMutexDef_t os_mutex_def_##name = { 0, (control) } +#else //configSUPPORT_STATIC_ALLOCATION == 0 +#define osMutexDef(name) \ +const osMutexDef_t os_mutex_def_##name = { 0 } + +#endif + +#endif + +/// Access a Mutex definition. +/// \param name name of the mutex object. +/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMutex(name) \ +&os_mutex_def_##name + +/// Create and Initialize a Mutex object. +/// \param[in] mutex_def mutex definition referenced with \ref osMutex. +/// \return mutex ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. +osMutexId osMutexCreate (const osMutexDef_t *mutex_def); + +/// Wait until a Mutex becomes available. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. +osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec); + +/// Release a Mutex that was obtained by \ref osMutexWait. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. +osStatus osMutexRelease (osMutexId mutex_id); + +/// Delete a Mutex that was created by \ref osMutexCreate. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. +osStatus osMutexDelete (osMutexId mutex_id); + + +// ==== Semaphore Management Functions ==== + +#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available + +/// Define a Semaphore object. +/// \param name name of the semaphore object. +/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osSemaphoreDef(name) \ +extern const osSemaphoreDef_t os_semaphore_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osSemaphoreDef(name) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0, NULL } + +#define osSemaphoreStaticDef(name, control) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0, (control) } + +#else //configSUPPORT_STATIC_ALLOCATION == 0 +#define osSemaphoreDef(name) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0 } +#endif +#endif + +/// Access a Semaphore definition. +/// \param name name of the semaphore object. +/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osSemaphore(name) \ +&os_semaphore_def_##name + +/// Create and Initialize a Semaphore object used for managing resources. +/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore. +/// \param[in] count number of available resources. +/// \return semaphore ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. +osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count); + +/// Wait until a Semaphore token becomes available. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec); + +/// Release a Semaphore token. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreRelease (osSemaphoreId semaphore_id); + +/// Delete a Semaphore that was created by \ref osSemaphoreCreate. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreDelete (osSemaphoreId semaphore_id); + +#endif // Semaphore available + + +// ==== Memory Pool Management Functions ==== + +#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available + +/// \brief Define a Memory Pool. +/// \param name name of the memory pool. +/// \param no maximum number of blocks (objects) in the memory pool. +/// \param type data type of a single block (object). +/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osPoolDef(name, no, type) \ +extern const osPoolDef_t os_pool_def_##name +#else // define the object +#define osPoolDef(name, no, type) \ +const osPoolDef_t os_pool_def_##name = \ +{ (no), sizeof(type), NULL } +#endif + +/// \brief Access a Memory Pool definition. +/// \param name name of the memory pool +/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osPool(name) \ +&os_pool_def_##name + +/// Create and Initialize a memory pool. +/// \param[in] pool_def memory pool definition referenced with \ref osPool. +/// \return memory pool ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. +osPoolId osPoolCreate (const osPoolDef_t *pool_def); + +/// Allocate a memory block from a memory pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. +void *osPoolAlloc (osPoolId pool_id); + +/// Allocate a memory block from a memory pool and set memory block to zero. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. +void *osPoolCAlloc (osPoolId pool_id); + +/// Return an allocated memory block back to a specific memory pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \param[in] block address of the allocated memory block that is returned to the memory pool. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. +osStatus osPoolFree (osPoolId pool_id, void *block); + +#endif // Memory Pool Management available + + +// ==== Message Queue Management Functions ==== + +#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available + +/// \brief Create a Message Queue Definition. +/// \param name name of the queue. +/// \param queue_sz maximum number of messages in the queue. +/// \param type data type of a single message element (for debugger). +/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMessageQDef(name, queue_sz, type) \ +extern const osMessageQDef_t os_messageQ_def_##name +#else // define the object +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osMessageQDef(name, queue_sz, type) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type), NULL, NULL } + +#define osMessageQStaticDef(name, queue_sz, type, buffer, control) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type) , (buffer), (control)} +#else //configSUPPORT_STATIC_ALLOCATION == 1 +#define osMessageQDef(name, queue_sz, type) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type) } + +#endif +#endif + +/// \brief Access a Message Queue Definition. +/// \param name name of the queue +/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMessageQ(name) \ +&os_messageQ_def_##name + +/// Create and Initialize a Message Queue. +/// \param[in] queue_def queue definition referenced with \ref osMessageQ. +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return message queue ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. +osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id); + +/// Put a Message to a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] info message information. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. +osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec); + +/// Get a Message or Wait for a Message from a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return event information that includes status code. +/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. +osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec); + +#endif // Message Queues available + + +// ==== Mail Queue Management Functions ==== + +#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available + +/// \brief Create a Mail Queue Definition. +/// \param name name of the queue +/// \param queue_sz maximum number of messages in queue +/// \param type data type of a single message element +/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMailQDef(name, queue_sz, type) \ +extern struct os_mailQ_cb *os_mailQ_cb_##name \ +extern osMailQDef_t os_mailQ_def_##name +#else // define the object +#define osMailQDef(name, queue_sz, type) \ +struct os_mailQ_cb *os_mailQ_cb_##name; \ +const osMailQDef_t os_mailQ_def_##name = \ +{ (queue_sz), sizeof (type), (&os_mailQ_cb_##name) } +#endif + +/// \brief Access a Mail Queue Definition. +/// \param name name of the queue +/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMailQ(name) \ +&os_mailQ_def_##name + +/// Create and Initialize mail queue. +/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return mail queue ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. +osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id); + +/// Allocate a memory block from a mail. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. +void *osMailAlloc (osMailQId queue_id, uint32_t millisec); + +/// Allocate a memory block from a mail and set memory block to zero. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. +void *osMailCAlloc (osMailQId queue_id, uint32_t millisec); + +/// Put a mail to a queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. +osStatus osMailPut (osMailQId queue_id, void *mail); + +/// Get a mail from a queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return event that contains mail information or error code. +/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. +osEvent osMailGet (osMailQId queue_id, uint32_t millisec); + +/// Free a memory block from a mail. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. +osStatus osMailFree (osMailQId queue_id, void *mail); + +#endif // Mail Queues available + +/*************************** Additional specific APIs to Free RTOS ************/ +/** +* @brief Handles the tick increment +* @param none. +* @retval none. +*/ +void osSystickHandler(void); + +#if ( INCLUDE_eTaskGetState == 1 ) +/** +* @brief Obtain the state of any thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval the stae of the thread, states are encoded by the osThreadState enumerated type. +*/ +osThreadState osThreadGetState(osThreadId thread_id); +#endif /* INCLUDE_eTaskGetState */ + +#if ( INCLUDE_eTaskGetState == 1 ) +/** +* @brief Check if a thread is already suspended or not. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ + +osStatus osThreadIsSuspended(osThreadId thread_id); + +#endif /* INCLUDE_eTaskGetState */ + +/** +* @brief Suspend execution of a thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadSuspend (osThreadId thread_id); + +/** +* @brief Resume execution of a suspended thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadResume (osThreadId thread_id); + +/** +* @brief Suspend execution of a all active threads. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadSuspendAll (void); + +/** +* @brief Resume execution of a all suspended threads. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadResumeAll (void); + +/** +* @brief Delay a task until a specified time +* @param PreviousWakeTime Pointer to a variable that holds the time at which the +* task was last unblocked. PreviousWakeTime must be initialised with the current time +* prior to its first use (PreviousWakeTime = osKernelSysTick() ) +* @param millisec time delay value +* @retval status code that indicates the execution status of the function. +*/ +osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec); + +/** +* @brief Abort the delay for a specific thread +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId +* @retval status code that indicates the execution status of the function. +*/ +osStatus osAbortDelay(osThreadId thread_id); + +/** +* @brief Lists all the current threads, along with their current state +* and stack usage high water mark. +* @param buffer A buffer into which the above mentioned details +* will be written +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadList (uint8_t *buffer); + +/** +* @brief Receive an item from a queue without removing the item from the queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval event information that includes status code. +*/ +osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec); + +/** +* @brief Get the number of messaged stored in a queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval number of messages stored in a queue. +*/ +uint32_t osMessageWaiting(osMessageQId queue_id); + +/** +* @brief Get the available space in a message queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval available space in a message queue. +*/ +uint32_t osMessageAvailableSpace(osMessageQId queue_id); + +/** +* @brief Delete a Message Queue +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osMessageDelete (osMessageQId queue_id); + +/** +* @brief Create and Initialize a Recursive Mutex +* @param mutex_def mutex definition referenced with \ref osMutex. +* @retval mutex ID for reference by other functions or NULL in case of error.. +*/ +osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def); + +/** +* @brief Release a Recursive Mutex +* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osRecursiveMutexRelease (osMutexId mutex_id); + +/** +* @brief Release a Recursive Mutex +* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec); + +/** +* @brief Returns the current count value of a counting semaphore +* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate. +* @retval count value +*/ +uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id); + +#ifdef __cplusplus +} +#endif + +#endif // _CMSIS_OS_H diff --git a/Firmware/Board/v3/Odrive.ioc b/Firmware/Board/v3/Odrive.ioc index 186d9db7..b27ffb67 100644 --- a/Firmware/Board/v3/Odrive.ioc +++ b/Firmware/Board/v3/Odrive.ioc @@ -410,7 +410,7 @@ ProjectManager.BackupPrevious=false ProjectManager.CompilerOptimize=2 ProjectManager.ComputerToolchain=false ProjectManager.CoupleFile=true -ProjectManager.CustomerFirmwarePackage=/home/samuel/STM32Cube/Repository/STM32Cube_FW_F4_V1.19.0 +ProjectManager.CustomerFirmwarePackage= ProjectManager.DefaultFWLocation=true ProjectManager.DeletePrevious=true ProjectManager.DeviceId=STM32F405RGTx